Auertec ahşap ev freze makinesi

Auertech BL100A

New machine

Year of manufacture: 2023

Delivered in 2024; originally packaged and not commissioned

Specification and technical data:

Infeed Table Cross Conveyor
Number of strands: 6x with supergrip timing belts
Pitches: 650 / 650 / 850 / 1500 / 1500 mm
Length: approx. 1.8 m
Drive: geared motor, 1.5 kW
Min. workpiece loading length: 0.8 m
Raw material (laminated logs) is placed onto the cross conveyor by the operator. The cross conveyor automatically transfers the workpieces to the infeed table by lowering the level.

Infeed Table
Smooth sliding table with sliding plastic surface, allowing the raw material to be pushed into the machining zone damage-free by the servo pusher.
Support width: approx. 200 mm

1 pc. Log Home 4F-SERVO
Main milling unit for producing log home corner joints by milling on all four sides of the log in a single clamping setup. Processing is carried out by two milling tools from the rear and two from below, each guided on a horizontal and a vertical feed support.
Machining size: 140 x 200 mm
Milling depths:
- Horizontal top: max. 60 mm
- Horizontal bottom: max. 35 mm
- Vertical: max. 95 mm
Milling spindle diameter: 30 mm
Milling cutter: diameter x width, max.:
- Horizontal: 2x D=220 x W=120 mm
- Vertical: 2x D=280 x W=120 mm
Motor power: 4 x 4.0 kW
Speed: variable
Feed, horizontal & vertical: SERVODRIVE, continuously adjustable via software, automatic operation via IPC control / manual via two-hand push buttons
Milling depth adjustment: spindle with digital counter
Workpiece clamping device: vertical pneumatic, horizontal pneumatic
Extraction: subfloor hopper Ø 160 mm (pit required on site)
Complete with electrical systems, PLC control, and pneumatics. Machine frame prepped for installation of end-groove or dovetail milling cutter, drilling device, and cross-cut saw. Enclosed machine guard with upward-opening protective hood (with gas strut) and inspection window. Electrical switch cabinet mounted on base with 3.0 m cable conduit. Ready for operation, but without tools.

1 pc. Option i automatic milling depth adjustment for 4F milling cutter
The system consists of 4 additional NC-controlled SERVO axes for automatic milling depth positioning of the 4F tools. Input and parameter settings are done entirely via the IITO control software. Full control of all movements enables numerous additional processing options:
- Individual grooves and millings on all four component sides
Dcjdpfxjxavtke Af Djn
- Cut-outs or markings for window and door openings
- Individual double-side millings on component sides
- Individual triple joints
- Half corner joints for upper and lower logs or for beam layers
Automatic control via IPC / PLC / IITO software
Milling depth adjustment: SERVODRIVE
Tolerance: +/- 0.1 mm

2 pcs. 4-part groove cutters, D220; 21–90 mm; carbide
For 4-way horizontal milling
Wall thickness: +/- 28–100 mm
Dimensions: Ø220/30
Adjustable width: 21.0 - 90 mm
Configuration: Z=3; V=3, carbide / HM-WEPLA 15x15x2.5

2 pcs. 4-part groove cutters, D280; 21–90 mm; carbide
For 4-way vertical milling
Wall thickness: +/- 28–100 mm
Dimensions: Ø280/30
Adjustable width: 21.0 - 90 mm
Configuration: Z=3; V=3, carbide / HM-WEPLA 15x15x2.5

1 pc. Combination cutter for end groove & dovetail
3-axis controlled milling aggregate with a combination...

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.