DİKEY HİDROLİK SIKIŞTIRICI

AUSONIA SRL MG 50 T.V.E. 1200X1100X3500H

HYDRAULIC VERTICAL BALER MG 50 TVE
Hydraulic vertical baler model MG 50 T.V.E. 1200x1100x3500h, suitable for compacting and making bales from soft waste materials such as glass wool pads or similar.
The MG 50 T.E. model features a completely enclosed compaction chamber, with separate doors for material loading and bale extraction. The control panel is mounted on the side with integrated controls and is equipped with a 10-meter extension cord for remote positioning. The pressing plate is operated by a single cylinder with a 2700 mm stroke and guided by 4 lateral sliding guides. Material is loaded from the front.
Compaction cycle (downward and upward movement of the compactor) is automatic via push button.
- For transport, the machine is manufactured in three pieces: one 2000 mm high, another (the cylinder) approximately 2300 mm high, to be assembled on site.
Dedpfxoyzr Nmj Af Ujur
- Bale tying is preset and performed with the doors open, manually, using access slots on the back of the chamber, and can be done with standard pre-cut iron wire or strapping.
- Bale extraction is done with a forklift; dedicated channels at the base allow insertion of forklift tines.
- The bale extraction door closes with a handwheel, ensuring safe opening even with highly elastic materials. A microswitch ensures the door is fully closed before pressing. The upper door has a hydraulic lever lock with controls located on the machine body.
- The machine can be placed flush against a wall. Only front space is needed for material loading and bale extraction.
- The hydraulic circuit is equipped with a safety block valve to prevent the pressing plate from falling.
- The machine must be anchored to the floor and is positioned above a washing liquid collection tray.
• Brand / Model: MG 50 T.V.E. 1200X1100X3500H
• Press force: 50 tonnes
• Pressing force on material: 3.8 kg/cm²
• Operating pressure: 220 bar
• Bale size: 1250 x 1150 mm, height variable (min 800 mm, max 1700 mm)
• Bale weight: 400-1000 kg depending on material
• Compression chamber: 1200 x 1100 x 3500 mm
• Feed opening: 1200 x 1800 mm
• Compactor stroke: 2700 mm, single extension
• Operation: Automatic via push button
• Cycle time (automatic): 130 seconds
• Manual ties: 5
• Bale ejection: Removal by forklift
• Hydraulic power unit: Integrated into the press
• Motor power: 10 HP / 7.5 kW
• Power supply voltage: 380V – 50Hz
• Overall dimensions: 2000 x 3500 x 7150 mm
• Noise level: 78 dB
• Press weight: approx. 5,000 kg
• Certification: CE
Condition:
• Used hydraulic baler in excellent condition, sold as seen and approved.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.