Kenar bantlama makinesi

HOLZ-HER 1317

Koşul: ikinci el, Holz Her Sprint 1317 Heavy-duty design – edge thickness 0.4 – 8 mm PLC screen control Infeed fence controlled via PLC Pre-milling unit for jointing before the gluing section Fully automatic edge magazine for coil and strip material Glue application station for cartridge and PUR gluing Adhesive application using nozzle technology Workpiece height 6–50 mm Bledpfx Aoy Ewv Hjmgsh Glue height adjustment Pneumatic pressure unit End trimming unit 1918 for coil and strip up to 8 mm edge thickness Pneumatic adjustment of end saws from 0–10° bevel Milling unit 1942 MOT2 for flush trimming of 8 mm, radius and bevel trimming – 15° Scraping unit for bevels and radii with 2 scraper blade holders Corner rounding unit 1832 for rounding edges up to 3 mm edge thickness in through-feed Pneumatic engagement/disengagement Surface scraper unit – finishing Machine is FUNCTIONAL and in GOOD CONDITION Located at site

Koşul: ikinci el, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with selector switch for aggregate adjustment Fully automatic edge magazine for rolls and strip material GLU-JET adhesive application unit: cartridges + PU bonding Adhesive application via nozzle technology Bledpfx Aoywh Epemgoh Sensing nozzle Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1 roller motorized Pneumatic end trimming unit for rolls and strips up to 6 mm edge thickness With pneumatic switching for 0-10° mitre cut of the trimming saws Milling unit: flush trimming up to 6 mm, radii milling, bevel milling up to 15° Corner copying unit: for 3 mm edge thickness Scraper unit for bevels and radii, with 2 scraper holders Flat scraper unit for finishing Buffing unit Spraying unit in infeed and outfeed area as well as for PU Machine equipped with all processing tools WORKSHOP-TESTED machine First delivery: 2016 Available ex stock Lieboch

Koşul: ikinci el, Holzher Sprint 1317 edge bander pre-milling cutters glue application, glue cartridge pneumatic pre-cut guillotine pressure rollers Bedpfx Asx Tf D Uomgslh trimming saws top and bottom milling units corner rounding profile scraper flat scraper Max. edging height (mm): 50 Edgeband thickness in roll: 3mm feed speed: 10m/min The machine requires servicing as well as setup and adjustment. The machine can be switched on, all units power up, but the front saw does not respond to the material and the corner rounding unit needs adjustment.

Koşul: ikinci el, Üretim yılı: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color display 16:9 swiveling control panel, program memory, motorized pressure bridge adjustment, feed via transport chain, feed rate: 8-18 m/min extendable workpiece support, motorized infeed fence adjustment Jointing unit 1961, diamond jointing cutter for both climb and conventional milling, automatic adjustment to workpiece height Edge feed 1903 pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 multi-system automatic glue height adjustment with scanning nozzle, pressure regulator for controlling cartridge pressing pressure, PUR adhesive compatible, pressure station 1913 MOT, first roller driven Bjdpev Sv Enjfx Amgslh end-trimming unit 1918 with pneumatic adjustment end saw, pneumatically swiveling, multifunction unit 1824 MOT 4 with multifunction cutter for radii 1, 2, 3 mm corner rounding unit 1832 corner rounding for edge thickness up to 3mm radius scraper 1929 MOT 2 with motorized horizontal tracing roller adjustment with separate pneumatic adjustment (top/bottom) Chip collector for radius scraper, flat scraper 1964 for removing glue residue to achieve a clean joint with extraction hoods spray device 1856 for infeed and outfeed areas buffing unit 1940 for final cleaning and edge polishing ----- Technical Data ----- Edge thickness, roll material: 3 mm, Edge thickness, strip material: 8 mm, max. edge thickness for corner rounding: 3 mm, workpiece thickness: 45 mm, workpiece thickness for corner rounding: 45 mm, min. workpiece length: 180 mm, feed speed: 8-18 m/min, distance, workpiece support: 470 mm, support plate Ø for edge material: 800 mm, end trimming for roll material up to: 3 mm, heating time: 3.5 min, power, jointing cutter: 2 x 2 kW, power, end saw: 2 x 0.22 kW, power, milling station: 2 x 0.35 kW, power, corner rounding: 0.22 kW, extraction port, jointing unit: 120 mm, extraction port, milling unit: 70 mm, extraction port, scraper unit: 70 mm, total length: 5,350 mm, dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Image of operating hours is from a 2022 record Availability: short-term Location: Röllbach

Koşul: ikinci el, Üretim yılı: 2014, Plakanın ilerleme yönü: operatörden sağa doğru Maksimum kenar bant kalınlığı: 3 mm Minimum iş parçası kalınlığı: 8 mm Maksimum iş parçası kalınlığı: 60 mm Minimum iş parçası genişliği: 65 mm Minimum iş parçası uzunluğu: 160 mm İlerleme hızı: 10 m/dak. Birleştirme ünitesi: Evet, 2 freze ünitesi ile Birleştirme takımı: Elmas freze Çap: 70 mm Yükseklik: 48 mm Giriş hizalama cetvelinin ayarı: manuel Kesme makası: 3 mm'ye kadar Kenar malzemesinin tekli beslemesi: mümkün Tutkallama: GlueJet Pu- tutkallama: mümkün Kesme testeresi: Evet Kombi ünitesi Düz/Eğik/Yarıçap: pnömatik olarak ayarlanabilir Yuvarlatma ünitesi: pnömatik olarak ayarlanabilir Profil kazıma bıçağı: evet Düz kazıma bıçağı: Evet Ünite göstergesi: ekranda Kontrol türü: son anahtar üzerinden Kumanda: düğmeli kontrol paneli Taşıma tertibatı: Hayır Çekilebilir makaralı tabla: Evet Koruyucu kapak: Evet Çalışma yüksekliği ya da besleme tablası yüksekliği: 874 mm Ağırlık yaklaşık: 1400 kg Toz emiş çapı: 160 mm Stok yeri: Bsdpfxoylpwus Amgolh

Koşul: ikinci el, Üretim yılı: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control unit with LCD display Blsdjwka Nyopfx Amgjh - Swiveling control panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutter for clockwise and counter-clockwise rotation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensing nozzle - Automatic reloading - Can use PUR adhesives Pressure unit 1816: - With powered roller - Pneumatic control of pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivable from 0 to 10°, pneumatic adjustment Milling unit 1942 MOT 2: - For flush, radius and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Job-controlled surface scraper - Air nozzle at the surface scraper Buffing unit 1940 Edge thickness (coil): 3 mm Edge thickness (strip): 5 mm Maximum edge thickness for corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Feed speed: 8 m/min Distance between workpiece supports: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimmer power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle (jointing unit): 120 mm Extraction nozzle (milling unit): 70 mm Extraction nozzle (scraper unit): 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice