CNC delme makinesi

HOMAG BHX 500

Durum: işlem için hazır (kullanılmış), Üretim yılı: 2008, makine/araç numarası: 0-250-23-0021, Fonksiyonellik: tamamen fonksiyonel, iş parçası uzunluğu (maks.): 2.500 mm, iş parçası genişliği (maks.): 1.000 mm, iş parçası yüksekliği (maks.): 80 mm, X ekseni ilerleme hızı: 138 m/dak, Y ekseni ilerleme hızı: 80 m/dak, Teklif verme, 15.06.2026 tarihine kadar zamanında alım yapma zorunluluğu doğurur! TEKNİK DETAYLAR X Eksen Hızı: 138 m/dak Y Eksen Hızı: 80 m/dak Z Eksen Hızı: 50 m/dak İş parçası uzunluğu: 300–2.500 mm İş parçası genişliği: 100–1.000 mm İş parçası yüksekliği: 4–80 mm MAKİNE DETAYLARI Kontrol ünitesi: power control PC 85 T Boyutlar (U x G x Y): 6.500 × 2.300 × 2.700 mm Elektrik: 3 × 415 V / 50 Hz Güç tüketimi: 19,5 kW Sigorta: 50 A Pnömatik: min. 7 bar Hava tüketimi: 2.500 NL/dak Emiş borusu: 2 × 280 mm Gjdpfsy Sad Hsx Apnoiu Emiş kapasitesi: min. 4.450 m³/saat

Durum: mükemmel (kullanılmış), Üretim yılı: 2008, İşleme merkezi Üretici: Weeke Tip: BHX 500 Yapım yılı: 2008 İşleme boyutu X: 2.500 mm İşleme boyutu Y: 1.300 mm İşleme boyutu Z: 4 - 80 mm Freze ünitesi sayısı. 2 adet delme ünitesi: 2 dikey delme mili: 72 yatay delme mili X: 16 yatay delme mili Y: 4 kanal açma testeresi: 90° eğilebilir hız X ekseni: 130 m/dak hız Y ekseni: 80 m/dak hız Z1 -eksen: 50 m/dak Z2 ekseni hızı: 27 m/dak Dönme hızı: 18.000 rpm Demonte - doğrudan mevcut Giedpfx Aeh E Sghepneu

Durum: mükemmel (kullanılmış), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTRE Moving plate (workpiece), stationary working head - horizontal plate (workpiece) Controller: PowerControl PC86 powerTouch (woodWOP software) Safety enclosure for the working head 2 workpiece clamps for easy access to the working area WEEKE pre-positioning unit for faster positioning of workpieces in the machine with clamping vices Infeed support table (workpiece support) - outfeed table (with powered conveyor belt) With automatic panel pusher Min. workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 (2 x 4 mm) Max. workpiece dimensions (X-Y-Z) mm: 3000 x 1000 (option 1300) x 80 (2 x 40 mm) Simultaneous machining of 2 workpieces (in Z-axis) Separate control cabinet and operating console WORKING UNITS (TOP): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW - 42 independent vertical drilling spindles (drill head power 2.3 kW) - 10 independent horizontal drilling spindles (8 in X + 2 in Y) - 1 grooving saw unit (swivels 90° in X-Y direction), diameter 125 mm Gisdpfx Ajyyvttspnju - 1 vertical main spindle (routing unit) ETP (power 6 kW) WORKING UNITS (BOTTOM): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW - 42 independent vertical drilling spindles (drill head power 2.3 kW) - 10 independent horizontal drilling spindles (8 in X + 2 in Y) - 1 grooving saw unit (swivels 90° in X-Y direction), diameter 125 mm - 1 vertical main spindle (routing unit) ETP (power 6 kW)

Durum: mükemmel (kullanılmış), 3 eksenli (X-Y-Z) CNC kontrollü "ESNEK" İŞLEME MERKEZİ Hareketli plaka (iş parçası), statik çalışma kafası -Yatay plaka (iş parçası) PowerControl kontrolü (yazılım woodWOP) Çalışma kafasının güvenlik kabini No. 2 emniyet kilitleri Çalışma alanı için iş parçası sıkıştırma çeneleri WEEKE Ön konumlandırma ünitesi - sıkma tutuculu makinelerde iş parçalarının daha hızlı konumlandırılması için. Giriş - çıkış tablasında destek tablası (iş parçası desteği) (taşıma kayışı ile) Otomatik plaka itici ile Minimum iş parçası boyutları (X-Y-Z) mm 200 x 70 x 8 (2 x 4 mm) Maksimum iş parçası boyutları (X-Y-Z) mm 2500x1000 (isteğe bağlı mm 1300)x 80 (2 x 40 mm) İki iş parçası aynı anda işlenebilir (Z ekseninde) Gisdpfxelkdpms Apneu Ayrı elektrik ve kontrol paneli ile ÇALIŞMA GRUPLARI (ÜSTTE): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 23 Bağımsız dikey delme milleri (delme kafası gücü Kw 2,3) Nr. 5 bağımsız yatay delme mili (X'te 4 + y'de 1) Nr. 1 Kanal açma testere ünitesi (X-Y yönünde 90° döner) çap (mm) mm 125 Nr. 1 Dikey ana mil (fraesaggregat) ETP (dikey ana milin gücü (Kw 6) ÇALIŞMA GRUPLARI (AŞAĞIDA): No. 23 Bağımsız dikey delme milleri (delme kafası gücü Kw 2,3) No. 5 bağımsız yatay delme mili (X'te 4 + y'de 1) Nr. 1 Kanal açma testere ünitesi (X-Y yönünde 90° döner) çap (mm) mm 125 Nr. 1 Dikey ana mil (fraesaggregat) ETP (dikey ana milin gücü (Kw 6)

Durum: ikinci el, Üretim yılı: 2018, Delivery time approx. 5 months Machine from school use – TOP condition, very low operating hours (edge-banding unit unused) Without tools Plus: disassembly / delivery / assembly & commissioning / training Included: Maestro 3D & Pro View MORBIDELLI P200 Working field X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edgebanding Made for You This CNC machining center is equipped with an extensive range of edge-banding tools to meet any demand in woodworking. MAIN ADVANTAGES - High performance, featuring the advanced edgebanding unit H80C, drilling spindles with 8,000 rpm, and the most robust spindle technology available on the market, with more than 1,000 maintenance-free operating hours. - Better and richer equipment: The suction pads can be excluded and configured with the FLEX worktable to optimally equip the machine according to specific requirements. Gijdpfx Apeyuw Sronsu - Easier and more intuitive programming thanks to the integrated Maestro EDGE CAD-CAM module for edgebanding technologies - User-friendly: The lowered frame provides full access to the working table at any time; the control cabinet and vacuum pump are integrated. In the PRO SPACE configuration, there are no safety barriers required. Base Frame Structure: The base structure is a monolithic construction made from thick-walled steel, reinforced with welded square plates throughout the entire machine bed for extreme stability. The machine bed shape, with a large base, is essential for lasting precision and stability. The load-bearing structure comprises an especially robust monolithic steel base, highly ribbed and very stiff; its particularly wide support base is specifically designed to provide machine stability and long-term precision regardless of working conditions – the machine does not need to be anchored to the floor. The base provides a large and solid support for the moving gantry: the working unit thus has a balanced, stable, and resilient support capable of withstanding heavy-duty use, which ensures superior performance and enhanced accuracy. The mobile gantry consists of a solid single piece anchored to the base and travels along prismatic guideways with ball-bearing shoe recirculation of the highest quality. The working unit is mounted on this and moves along the Y and Z axes via prismatic guides with ball-return shoes as well. Movement of the lower traverse unit (X-axis) and the working unit along the moving beam (Y-axis) is achieved through a helical rack-and-pinion drive. This provides higher tooth engagement, resulting in greater acceleration and faster movement along the X and Y axes. The specially designed helical gear reduces component wear and noise during operation. The vertical Z-axis is driven by a ball-screw, ensuring perfect dynamic load balance and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, guaranteeing absolute machining quality.

Durum: ikinci el, Üretim yılı: 2007, Fonksiyonellik: tamamen fonksiyonel, güç: 20 kW (27,19 bg), giriş voltajı: 415 V, giriş akımı: 50 A, giriş frekansı: 50 Hz, giriş akımı türü: trifaze, iş parçası uzunluğu (maks.): 2.500 mm, iş parçası genişliği (maks.): 1.000 mm, iş parçası yüksekliği (maks.): 80 mm, Donanım: dokümantasyon / kılavuz, Wir bieten dieses gebrauchte WEEKE OPTIMAT BHX 500 Durchlauf-Bearbeitungszentrum, Baujahr 2007, zum Verkauf an. Das Homag Weeke Optimat BHX 500 ist ein kompaktes CNC-Horizontales Bohrzentrum, das für die hochpräzise Bearbeitung von Möbelplatten, Korpusteilen und Komponenten für den Innenausbau entwickelt wurde. Die horizontale Bauweise ermöglicht eine effiziente Bearbeitung bei geringem Platzbedarf und gewährleistet gleichzeitig hohe Produktionsgeschwindigkeit und Genauigkeit. _____ Hauptmerkmale • Horizontales CNC-Bohrzentrum für effiziente Plattenbearbeitung • Großes Bearbeitungsfeld • Schnelle Achsbewegungen für kurze Taktzeiten • Integriertes Spannsystem zur präzisen Werkstückpositionierung • Ausgelegt für Bohr-, Fräs- und Nutenbearbeitungen • Gefertigt von HOMAG / Weeke, einem führenden Hersteller von CNC-Holzbearbeitungsmaschinen _____ Achsengeschwindigkeiten • X-Achse: bis zu 138 m/min • Y-Achse: bis zu 80 m/min • Z-Achse: bis zu 50 m/min • Druckplattenachse: 27 m/min _____ Werkstückabmessungen • Länge: min. 300 mm, max. 2500 mm • Breite: min. 100 mm, max. 1000 mm • Stärke: min. 4 mm, max. 80 mm _____ Maschinenabmessungen Gjdpsyr Utnofx Apneiu • Länge: ca. 6500 mm • Breite: ca. 2300 mm • Höhe: ca. 2700 mm _____ Elektrische Anforderungen • Betriebsspannung: 3 × 415 V ±5% • Frequenz: 50 Hz • Gesamtanschlusswert: ca. 19,5 kW • Empfohlene Absicherung: 50 A _____ Pneumatische Anforderungen • Mindestdruck: 7 bar • Luftverbrauch: ca. 2500 NL/min _____ Absaugung • Absauganschluss: 2 × 280 mm • Erforderlicher Luftvolumenstrom: mindestens 4450 m³/h • Unterdruck: ca. 3000 Pa _____ Bei Fragen oder für weitere Informationen senden Sie uns gerne eine Nachricht oder rufen Sie uns an.

Durum: mükemmel (kullanılmış), Üretim yılı: 2013, çalışma saatleri: 3.000 h, 5-axis CNC portal machine; Console table with 6 movable consoles, each with 2 suction cups, side and longitudinal stops, LED position indicator for vacuum cups Venture 316 Future Package 10 pcs extraction rails, connection for Power-Clamp, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece length: All units single: 3300 mm, pendulum operation max. 1740 mm Tool diameter 25 mm: single 3475 mm, pendulum operation max. 1915 mm – Workpiece width: Front stop: 950 mm for all units / 1050 mm for tool diameter 25 mm Rear stop: up to 1400 mm / 1550 mm – Workpiece thickness: – Max. 250 mm including clamping devices – Up to max. 60 mm with standard clamp SAFETY AND PROTECTION FEATURES: EU-compliant; Safety fence on the right with door Left and rear: wall installation! Equipment supplied: 10 kW Drive5C spindle and 14-position (disk-type) ATC + 9-position side-mounted linear changer Drilling head with 16 spindles (V12/H4/S0/90°) Aggregate interface DRIVE5C+ Gijdey E Npfspfx Apneu Tool length probe Software for position measurement, CNC axis rotation Tool handover station Coolant tank for machining spindle Vacuum pump 300/360 m³/h Powerclamp pneumatic package Control: POWERCONTROL PC85 with POWERTOUCH control system; IPC Powerpack, Operator terminal for program start; camera system with tablet PC WOODWOP CAD/CAM interface standard Documentation and control texts: German Delivery includes only the depicted tools and HSK holders!

Durum: yeni, Üretim yılı: 2025, CNC-controlled boring, gluing, and dowel insertion machine Complete in standard configuration, including: - Linear guide support comprising: 1 pc. single-spindle horizontal boring unit, 0.65 kW motor, 70 mm stroke Tool rotation speed selectable via operator software (3,000/5,000/8,000 rpm) Giedpfx Apjw Sgm Heneu 1 pc. blow-out, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication system - X-axis NC controlled, with working length of 700 mm, max. traverse speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position via support table 5–40 mm - Dowel projection adjustable from 7–20 mm via mechanical digital counter, drilling depth adjustable from 0–35 mm (with drill length 70 mm), automatically set with projection - Closed gluing system with 6 bar glue pressure through glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for monitoring residual glue quantity in glue container - 1 pc. left side stop, 1 pc. right side stop (both removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control unit including: Built-in industrial PC, incl. soft PLC type Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industrial display 15” capacitive touchscreen, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-driven user software, freely programmable hole distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 2 work zones assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable job lists, plain-text error diagnosis - Integrated options: - Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle art. no. 0470-0810 - 1 EASY CLEAN system for automatic test glue shots before each start of drilling/gluing/dowel insertion cycle. E.C.S. for 1 pc. glue nozzle art. no. 0471-Z010 - 1 single-spindle vertical boring unit, top drilling, 0.65 kW (3,000/5,000/8,000 rpm), position (Y) manually adjustable via mechanical digital counter, adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill length 57 mm), max. workpiece thickness (Z) 50 mm, min. workpiece length (Y) 130 mm (incl. depth compensation, e.g. for Häfele Minifix) art. no. 0471-0830 - 4 vertical angled clamping cylinders 10° with holder, additional, art. no. 0470-0850 Available: at short notice

Durum: mükemmel (kullanılmış), Üretim yılı: 2008, Used CNC machining center Manufacturer: IMA Model: BIMA 300 125/430 Year of manufacture: 2008 4-axis CNC machining center with console table - 8 supports manually adjustable in X-direction - 3 vacuum cups per console - Vacuum pump: 90 m³/h - Vacuum connection for templates - LED display for vacuum cup position indication Gisdpfx Aoy Nzw Njpnou - Working area X: 200 – 4,300 mm - Working area Y: 0 – 1,400 mm (milling/drilling) - Working area Z: 12 – 125 mm (clearance 150 mm) - Additional central stop row - 14 vertical drill spindles + 6 horizontal - Horizontal drilling and grooving unit, swiveling 90° - Milling spindle: 7.5 kW, up to 18,000 rpm - With C-axis, 360° interpolation, liquid circulation cooling - Tool changer (18 positions) traveling with Y-support - Edge banding unit VT 100, 4-sided/all-around – rotation range 740 degrees - With double roller magazine, automatic granule feed Adapter units: - Saw, fixed at 90° - 4-spindle universal head Control: ICOS open 231 with 17" TFT UPS ImaWop 10.0 incl. MDC and production list software - Safety fence on the right side and safety mats at the front; - Rear: installation against a wall or separate safety shielding required

Durum: ikinci el, Üretim yılı: 2023, Fonksiyonellik: tamamen fonksiyonel, iş parçası yüksekliği (maks.): 60 mm, HOLZ-HER CNC Dowel Drilling & Insertion Machine POWER - PIN 7605 Workpiece thickness: 12 - 60mm Workpiece width: minimum 150mm (horizontal & vertical processing) Workpiece length: min. 60mm, max. unlimited (limited when placed against positioning fields) Software: Campus V8 Power-Pin (1x license) Continuous LED strip for easy orientation and status display Dowel insertion unit DA102 for pre-glued dowels as well as for untreated dowels in combination with white glue Glue system LS2 with electronic nozzle monitoring ECO MODE for energy-efficient operation Drilling unit BA102 (horizontal) 3-spindle MOT3 package – motorized adjustment of drilling depth 2D barcode scanner 21.5" touchscreen The POWER-PIN dowel machine is suitable as a standard dowel machine as well as the ideal addition to, for example, nesting or console machines. From cabinet furniture to premium solid wood drawers from 12mm material thickness, the 7605 is the ideal solution for precise drilling and insertion of wooden dowels. The continuous LED strip always displays the machine status, supporting the operator by indicating the correct loading position of the workpiece. Via the integrated barcode scanner, for example, DataMatrix codes can be scanned which include all processing information for the workpiece. Gsdpfx Ajyzg Dfjpnsiu Drilling positions and depths are automatically set and approached by the machine – for maximum precision and efficient workflows. The machine was reconditioned at the Voitsberg plant and the software was updated to the latest available version at the time of refurbishment! Delivery, installation, and operator training can be provided directly by us at additional cost. The machine is currently located in our shipping warehouse in Gratwein / Austria. In the event of any discrepancy between the German version and a foreign language version, only the German version is binding. Our General Terms and Conditions are available on our homepage at holzher.de/de/agb.