Kenar bantlayıcı

IMA NOVIMAT / CONTOUR / I / G80 / 790 / L20

Single-sided edge bander for narrow edges IMA NOVIMAT / CONTOUR / I / G80 / 790 / L20 with MFA servo trimming unit for corner copying
Year of manufacture: 2009
Technical condition: very good

- Sturdy machine base for mounting the various processing units.
- Feed speed drive electronically adjustable from 6–30 m/min
(processing unit operating speed is not synchronized with the full adjustable feed speed range).
- Feed chain running in sliding guides with plastic inserts and an 80 mm wide rubber cover.
- Automatic feed chain lubrication, controlled by the machine’s program.
- Upper pressure unit made of a double V-belt, 70 mm wide, running on roller bearings; pressure adjustable electronically.
- Machine safety guarding compliant with CE certification.
- Soundproof and protective enclosures.
- Edgebanding unit with a drive housed in a sealed oil bath with glue pot
(1 main driven pressure roller + 5 auxiliary rollers); Quick-Lock pneumatic glue pot attachment system for fast glue pot changeover.
- "Touch-screen" control panel.
- Trimming saw unit for cutting off edge excess at the front and rear corners of the workpiece
with the following features: pneumatic blade adjustment from 0–25°, straight and bevel trimming,
automatic beveling saw adjustment for two different edge thicknesses (e.g. 0.4 and 1.2 mm),
and overhang adjustment for corner copying.
- All processing units equipped with chip extraction ports.
- Novimat Contour series edge banders maintain very high finish quality due to powerful corner copying units and minimal gap between elements (~300 mm).
Iodpfx Adsw R S Sle Rebc

Basic technical specifications:
- Edge material from roll thickness: 0.3 to 3 mm
- Paper, PVC, and ABS edge: 0.3–3.0 mm
- Veneer: 0.5–3.0 mm
- Solid wood lippings: 0.8–20 mm
- Edge height: 14–65 mm
- Maximum edge overhang at the top:
• for edge thickness up to 8 mm – 5 mm
• above 8 mm – 2 mm

Workpiece dimensions:
- Minimum workpiece length in feed direction: 150 mm
- Minimum workpiece width (for thickness up to 25 mm): 65 mm
- Minimum workpiece thickness: 8 mm (without flat scraper) or 12 mm (with flat scraper)
- Maximum workpiece thickness:
• without corner copying: max 60 mm
• with corner copying: max 40 mm
- Smallest workpiece: 150 × 150 mm or 65 × 300 mm
(note: * 65 mm applies to max workpiece thickness of 25 mm)

Machine technical data:
- Electronically controlled feed speed range: 6–30 m/min
(note: feed may be limited by particular units on the machine)
- Workpiece overhang beyond feed chain:
• 38 mm (including edge thickness 0.3–8 mm)
• 30 mm (including edge thickness 8.1–20 mm)

Power supply:
- Voltage: 400/230 V, +5/–10 % with grounding
- Current frequency: 50 Hz
- Control voltage: 230 V AC / 24 V
- Compressed air: 8 bar
- Extraction air velocity: 28 m/s

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.