Panel geri dönüşü

MAHROS SPINNER

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2006, Fonksiyonellik: denenmemiş, dönüş hızı (maks.): 2.970 dev/dak, iş parçası uzunluğu (maks.): 2.500 mm, iş parçası genişliği (maks.): 1.000 mm, Donanım: CE işareti, TECHNICAL DETAILS Maximum panel width: 1,000 mm Maximum panel length: 2,500 mm Minimum panel length: 250 mm Dusdpfx Aeyzy T Tof Uer Minimum panel width: 100 mm Number of lower vertical groups: 5 Number of upper vertical groups: 1 Lateral horizontal groups: yes Number of pressure elements: 5 Number of horizontal side groups: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS System control: TOPDRILL Machine programming software: WOODWOP Total installed power: 35 kW EQUIPMENT Lateral horizontal groups Positioning of the groups via CNC Positioning of the Z-axis via CNC Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the place of destination. External reference: 6157

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2014, Fonksiyonellik: denenmemiş, iş parçası yüksekliği (maks.): 60 mm, kenar kalınlığı (maks.): 20 mm, X ekseni ilerleme hızı: 30 m/dak, kontrolör modeli: ICOS OPEN, The machine has the following configuration: Unit: Pre-milling Manufacturer model: 08.379 Motor power: 4 kW Speed: 8,800 rpm Unit: Cross-cutting unit Manufacturer model: 08.42 / 30 / B Number of motors: 2 Motor power: 0.660 kW Unit: Corner rounding unit Manufacturer model: 08.055 Number of motors: 2 Motor power: 1.850 kW Speed: 12,000 rpm Unit: Profile rounding unit Manufacturer model: SKF-L Number of motors: 4 Max. processing speed: 20 m/min Motor power: 0.180 kW Speed: 12,000 rpm Dsdpfxeyzy Iws Af Usur Unit: Edge scraping knife Manufacturer model: 08.519 Unit: Glue scraping knife Manufacturer model: 08.521 Unit: Brushes Manufacturer model: 08.617-2 Number of motors: 2 Motor power: 0.180 kW Speed: 1,400 rpm TECHNICAL DETAILS Min. panel height: 8 mm Max. panel height: 60 mm Min. panel length: 150 mm Min. panel width: 65 mm Min. edge thickness: 0.3 mm Max. edge thickness: 20 mm Max. feed speed: 30 m/min MACHINE DETAILS Control system: ICOS OPEN EQUIPMENT Magazine for coil material Container for hot-melt adhesive Pressure roller unit for edging Pressure applied via rubber-coated belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer is entitled to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at its destination. External reference: 6089

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2006, Fonksiyonellik: denenmemiş, X ekseni hareket mesafesi: 4.400 mm, Y ekseni hareket mesafesi: 1.300 mm, X ekseni ilerleme hızı: 40 m/dak, Y ekseni ilerleme hızı: 45 m/dak, Donanım: CE işareti, The machine has the following configuration: Drilling groups: Upper group with 30 vertical and 6 horizontal spindles Milling group 1: Upper group, 5 controlled axes, 7.5 kW motor power, liquid cooling system Milling group 2: Upper group, 11 kW motor power, 18,000 rpm, liquid cooling system Tool magazine 1: 24 positions, located at the rear of the machine Tool magazine 2: 6 positions, at the working head TECHNICAL DETAILS X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Maximum workpiece passage height: 400 mm Traverse speed X-axis: 40 m/min Traverse speed Y-axis: 45 m/min Traverse speed Z-axis: 22.5 m/min MACHINE DETAILS Control system: WINDOWS Machine programming software: XILOG Individual vacuum pump capacity: 250 m³/h Connected load: 35 kW Duodeyzy S Njpfx Af Uor EQUIPMENT Work table with suction bars Number of suction bars: 8 Vacuum clamping for workpieces CE safety standards Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documentation. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8340

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2016, Fonksiyonellik: denenmemiş, kenar kalınlığı (maks.): 22 mm, dönüş hızı (maks.): 12.000 dev/dak, Donanım: CE işareti, The machine has the following configuration: - Pre-milling unit - Automatic, time-controlled intervention and positioning via NC - Lamps for preheating the panel edge - Edge strip magazine - Glue pot for EVA hot-melt adhesive - Pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 - Number of motors: 2 Top and bottom trimming unit RS-100 - Number of motors: 2 - Motor power: 2 kW - Speed: 12,000 rpm Finishing and corner rounding unit RF-100 - Number of motors: 2 - Motor power: 2 kW - Speed: 12,000 rpm Corner rounding unit AR30 - Number of motors: 2 - Motor power: 0.8 kW - Speed: 12,000 rpm - Automatic, time-controlled intervention Cut-off unit RB02 - Positioning via NC Dsdpfxoyxndbs Af Uour Glue scraper unit RCC-701 Polishing unit SP-501 - Number of motors: 2 - Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS - Minimum panel height: 10 mm - Maximum panel height: 60 mm - Minimum edge thickness: 0.4 mm - Maximum edge thickness: 22 mm MACHINE DETAILS - Total connected load: 22 kW EQUIPMENT - Pressure with rubber band - Panel support guides with NC positioning - CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7673

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2012, Fonksiyonellik: denenmemiş, kesme genişliği (maks.): 4.500 mm, X ekseni ilerleme hızı: 140 m/dak, bölüm uzunluğu (maks.): 2.200 mm, Donanım: CE işareti, dozaj cihazı, TECHNICAL DETAILS The machine is equipped with two saw carriages. The technical specifications apply to both: Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum tool diameter (saw unit): 380 mm Maximum tool diameter (scoring unit): 200 mm Saw blade protrusion: 95 mm Number of rip saw grippers: 5 Number of cross-cut saw grippers: 8+4 Maximum feed speed: 140 m/min Connected load, saw unit 1: 15 kW Connected load, saw unit 2: 15 kW Dsdpfx Afjyxn Ads Usur Connected load, scoring unit 1: 2.2 kW Connected load, scoring unit 2: 2.2 kW MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: Biesse-OSI EQUIPMENT Second flexible push system Quick-change system for saw blades Label printer for barcodes CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the place of destination. External reference: 5711

Durumu: kullanılmış, makine/araç numarası: 007234, Maks. Panel genişliği: 900 mm Maks. Panel uzunluğu: 1200 mm Dusdpfewlpnnjx Af Usr Konveyör uzunluğu: 8000 mm Kenar bantlama makinesi için parça dönüşü: sol

Üretim yılı: 2007, Durumu: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, iş parçası uzunluğu (maks.): 2.000 mm, iş parçası genişliği (maks.): 800 mm, konveyör bant uzunluğu: 5.700 mm, Donanım: CE işareti, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum workpiece width: 800 mm Minimum workpiece length: 140 mm Maximum workpiece length: 2,000 mm Dodsxxafbspfx Af Uour Conveyor length: 5,700 mm MACHINE DETAILS Dimensions (L x W): 5,700 x 1,000 mm EQUIPMENT Return conveyor for edge banding machine on the left Panel ejection with air-blast table Panel feed with motorized conveyor belt CE marking