Vakumlu tank kamyonu

MAN Naaktgeboren VACU PRESS 10.000 TGS 41.440 BB 8X4

++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++

1. Pump Unit
Suitable for vacuum and pressure operation with low heat emissions: Vacu-Press 10,000, air-cooled 3-lobe rotary blower
Output: 8,220 m³/hour (no load)
Vacuum: 0.95 bar (0.05 bar abs.) at 100°C
Overpressure: 1.20 bar (2.20 bar abs.) at 125°C
Power consumption: max. 190 kW

2. Sound Insulation
The Vacu-Press 10,000 pump is installed in a sound-insulated housing with intake, cooling air, and exhaust silencers. The doors of the soundproof housing and the inside of the noise dampers are made of stainless steel. The noise level of the suction system is approx. 80 dB(A).

3. Stainless Steel Tank
Net volume: Cargo compartment 13.0 m³ (stainless steel tank)
Filter compartment 2.0 m³
Total 15.0 m³
Wall thickness: 6 mm
Design pressure: Full vacuum to 2 bar overpressure
Design temperature: -20°C/+50°C
Filter compartment: located at the front of the tank with a fully opening top cover
Filter chamber discharge: Via large oval hatch, waterproof and pressure-tight

4. HI-LIFT Version
Intermediate bridge and an additional, rear-mounted tiltable tank, allowing discharge or bagging into big-bags, skips, or containers
Tipping height (under slider): approx. 1,600 mm (tank fully raised and tipped)
Lifting cylinder: Hydraulic, double-acting
Stroke: 1,070 mm
Slider: DN300 pneumatic actuator

5. Filter System
Filter compartment: cylindrical, diameter 1,800 mm, mounted at the front of the tank with a large oval discharge hatch into the load area.
Separation efficiency: 99.95%
Class: BIA Class C filter material

6. Suction and Pressure Connections
Suction connection: redirected on the left side inside the tank with a large bend and replaceable wear plate, connection DN150 with hose coupling of choice
Pressure connection: DN125 with hose coupling of choice

7. Rear Cover
Hydraulically opened with internal cone and vent connection.
Locking: Hydraulic, self-adjusting wedge clamp design, ensuring equal clamping force per wedge and optimal sealing regardless of rubber gasket thickness.
Chassis make: MAN TGS 41.440 BB
Toolbox: rear left with 2 lockable lids, stainless steel
Storage box: rear left, open design, V2A grade stainless steel
Mudguards: galvanized with rubber strip
Side underrun protection: according to legal requirements
Tipping axle: continuous, mounted in cast steel
Transfer case
Iedswqblpspfx Ad Rsbc
The OMSI transfer case interrupts the drive line and transfers engine power to the pump. The engine can run at optimal constant RPM, allowing variable pump speeds. This supports service life and reduces engine consumption.

8. Control System
Operation: electrical, relay-controlled
Control functions:
Main switch
Work light on/off
Rotating beacon on/off
Suction/blow selector
Start/stop suction
Start blow with separate switch at right
Indication:
Main switch
Blower oil pressure
Blower oil temperature
Work lamp
Rotating beacon
Cooling air flap
Free intake flap
Blow flap
Measuring instruments: vacuum gauge

Accessories (included):
1. Speck water pump 701/140B with approx. 1,000-liter water tank and 40 meter spray hose reel
2. RAL 2004 paint finish
3. IFM level sensor for liquids (customer-provided information)
4. 6 work lights (2 left, 2 right, 2 rear on advertising panels), switched from

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.