Panel testere

MAYER PS 80

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2009, çalışma saatleri: 29.000 h, Fonksiyonellik: denenmemiş, X ekseni ilerleme hızı: 25 m/dak, toplam uzunluk: 7.755 mm, iş parçası yüksekliği (maks.): 40 mm, çalışma yüksekliği: 950 mm, kontrolör modeli: PowerControl PC22, TECHNICAL SPECIFICATIONS Feed rate: 18 - 25 m/min Max. feed rate with FK11: 20 m/min Working height: 950 mm Minimum workpiece width (workpiece thickness 12-22 mm): 60 mm (dependent on workpiece length) Minimum workpiece width (workpiece thickness 23-40 mm): 105 mm (dependent on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12 - 40 mm Edge material (coil): 0.3 - 3 mm Max. edge cross-section (PVC): 135 mm² Max. edge cross-section (veneer): 100 mm² Max. coil diameter: 830 mm Edge material (strips): 0.4 - 20 mm Max. edge cross-section (strips): 900 mm² MACHINE DETAILS Control system: PowerControl PC22 Pneumatic connection: 7 - 8 bar Overall length: 7,755 mm Operating hours: approx. 29,000 h EQUIPMENT - Scissor-type workpiece support with roller track, extendable by 1000 mm Pgjdpfx Asyc S Hasadeg - Infeed fence, automatically adjustable - Fixed stop side left - Pneumatically controlled infeed lock - Top pressure via powered composite timing belt - Electric height adjustment - Workpiece feed with transport chain and rubber pads - Separating agent spray unit top/bottom - Jointing unit 2 x 3 kW - Gluing unit A20 with 2 rollers, including workpiece pre-heating, Quickmelt application unit with quick-release system, 2-roller magazine, pressure zone C (automatically adjustable, with 1 pre-press roller and 6 post-press rollers) - End trimming unit HL84 0.8 kW, with automatic adjustment for bevel/straight cut and pneumatic adjustment for flush/overhang trimming - Pre-milling unit 1.5 kW, pneumatic adjustment flush/overhang milling - Profile trimming unit FK11 with automatic switch from bevel to radius milling - Profile pull-off blade PN10 (with pneumatic lateral retraction) - Finishing unit (with pneumatic lateral retraction), consisting of glue joint scraping blade and buffing unit - Remote control - Workpiece guide for FK unit Note: Container loading and seaworthy packaging by the seller is not possible.

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2008, çalışma saatleri: 33.000 h, Fonksiyonellik: denenmemiş, X ekseni ilerleme hızı: 25 m/dak, iş parçası yüksekliği (maks.): 60 mm, çalışma yüksekliği: 950 mm, kontrolör modeli: Power Control PC22, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Working height: 950 mm Minimum working width at workpiece thickness 22 mm: 55 mm Minimum working width at workpiece thickness 60 mm: 100 mm Workpiece projection: 30 mm Workpiece thickness: 8 (12) - 60 mm Edge material, strips max.: 0.4 - 20 mm Edge cross-section, strips max.: 900 mm² Edge material, coil: 0.3 - 3 mm Edge cross-section max. (PVC): 135 mm² Edge cross-section max. (veneer): 100 mm² Max. coil diameter: 830 mm MACHINE DETAILS Control system: Power Control PC22 Pneumatic connection: 7 - 8 bar Operating hours: approx. 33,000 h EQUIPMENT Continuous machine baseframe for mounting of processing units Workpiece support with roller rail, extendable by approx. 800 mm Glue roller drive halts when feed is stopped Glue pot lift-off when feed is stopped Glue pot clamping actuated by workpiece Infeed fence automatically adjustable Infeed stop, pneumatically controlled Feed device with 2 rollers Infeed extension 500 mm Automatic adjustment of pressure zone Sliding carriage Pre-installation for Boomerang ZHR05 return system Workpiece support in extended scissor design Production data acquisition Electric height adjustment Fixed stop side left Workpiece transport device Upper pressure unit Release agent spray unit Jointing cutter unit, 2 x 3 kW Gluing section A20 Basic for coil material up to 3 mm and strip material up to 20 mm, with melting unit, granulate hopper, and quick-release system Cross-cutting unit, 2 x 0.8 kW, pneumatically adjustable Slip agent spray unit Pgjdpfx Asyc Sr Asadog Pre-milling unit 1.5 kW, pneumatically adjustable Profile trimming unit FK13, 2 x 0.4 kW Universal milling unit 4 kW, controlled, with stepless axis Automatic MN21 multi-finishing unit Finish unit FA11, with finishing system, cleaning agent application, and buffing unit, pneumatically adjustable Sound insulation Space reserved for additional processing units Note: The machine is sold without working tools. Container loading and sea packaging by the seller is not possible.

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2009, çalışma saatleri: 6.000 h, Fonksiyonellik: denenmemiş, X ekseni ilerleme hızı: 80 m/dak, X ekseni hareket mesafesi: 3.550 mm, Y ekseni hareket mesafesi: 1.680 mm, Z ekseni hareket mesafesi: 275 mm, maksimum mil hızı: 24.000 dev/dak, TECHNICAL DETAILS Travel X-axis: 3,550 mm Travel Y-axis: 1,680 mm Travel Z-axis: 275 mm Main spindle speed max.: 24,000 rpm Working area X-axis: 3,060 mm Working area Y-axis: 1,210 mm Working area Z-axis: 100 mm Speed X: 80 m/min Speed Y: 80 m/min Speed Z: 25 m/min MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 5,900 x 4,020 x 2,340 mm Weight: approx. 3,350 kg Extraction port diameter: 200 mm Operating hours: approx. 6,000 h EQUIPMENT Linear tool changer with 8 positions, travelling Side pick-up station for 2 tools Travelling pick-up station for HSK F63 aggregate/tool 14 vertical drilling spindles (9 in X and 5 in Y direction) 6 horizontal drilling spindles (4 in X and 2 in Y direction) 1 grooving saw (4-10 mm) positioned along X-axis 1 main spindle HSK F-63, 9 kW Prepared for 0-360° C-axis 6 supports for vacuum clamps Travelling laser for vacuum cup positioning 2 working zones for pendulum operation Pgodpfx Ajyc Smgoadjg Handheld terminal Automatic central lubrication Note: Container loading and sea-freight packaging by the seller is not possible.