Panel testere

SELCO WNA 610 Twin Pusher

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2014, Fonksiyonellik: denenmemiş, güç: 25 kW (33,99 bg), iş parçası yüksekliği (maks.): 60 mm, kenar kalınlığı (maks.): 12 mm, X ekseni ilerleme hızı: 18 m/dak, Donanım: CE işareti, TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Maximum feed speed: 18 m/min Sequence of work steps: Section 1 Nedpsytr Rgefx Abdewd Work step: Positioning Motor power: 2.5 kW Automatic control Edge preheater Glue pot Glue preheater Roll magazine Section 2 Work step: Trimming Number of motors: 2 Section 3 Work step: Edge milling Number of motors: 2 Motor power: 0.55 kW NC positioning Section 4 Work step: Rounding Number of motors: 2 NC positioning Section 5 Work step: Milling Number of motors: 1 Motor power: 3.5 kW Section 6 Work step: Edge scraping Section 7 Work step: Glue scraping Section 8 Work step: Brushing Number of motors: 2 MACHINE DETAILS Total power: 25 kW EQUIPMENT Panel support guide Spray unit Control with more than 20 control systems CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documentation of a descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6216

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2007, Fonksiyonellik: denenmemiş, iş parçası yüksekliği (maks.): 60 mm, kenar kalınlığı (maks.): 20 mm, kontrolör modeli: POWER CONTROL PC22, dönüş hızı (maks.): 12.000 dev/dak, Auction extended by one week due to updated technical data! TECHNICAL DETAILS Workpiece Dimensions Panel height: min. 12 mm Panel height: max. 60 mm Edge thickness: min. 0.4 mm Edge thickness: max. 20 mm Milling and Gluing Unit Pre-milling unit: available Motor power: 3 kW Speed: 9,000 rpm Adhesive tank for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Edge Processing Unit 1 End trimming: available Nsdpfx Ajyqx U Hsbdewd Number of motors: 2 Motor power: 0.80 kW Speed: 12,000 rpm Edge Processing Unit 2 Top and bottom rough flush trimming: available Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge Processing Unit 3 Corner rounding: available Number of motors: 2 Motor power: 0.4 kW Speed: 12,000 rpm Edge Processing Unit 4 Milling unit for rough processing: available Motor power: 4 kW Speed: 9,000 rpm Edge Processing Unit 5 Edge scraper blade Edge Processing Unit 6 Glue scraper blade Edge Processing Unit 7 Polishing unit: available Number of motors: 2 Motor power: 0.18 kW Edge Processing Unit 8 Belt sanding unit: available Motor power: 1.5 kW Control software: POWER CONTROL PC22 Total connected load: 42 kW

Durumu: incelemesiz (kullanılmış), Fonksiyonellik: denenmemiş, güç: 55 kW (74,78 bg), Üretim yılı: 2010, dönüş hızı (maks.): 2.965 dev/dak, TEKNİK DETAYLAR Motor devri: 2.965 dev/dak Maksimum çalışma basıncı: 8,5 bar Hava kurutucu Model: ABT 102 Basınçlı Hava Kurutucu Maksimum çalışma basıncı: 21 bar MAKİNE DETAYLARI Kontrol modeli: HMI PLC KAESER Nodpfx Ajyttk Ijbdjwd Motor gücü: 55 kW Çalışma gerilimi: 400/460 V Makine, fotoğraf dokümantasyonu ve teknik/ticari belgelere dayanarak mevcut gerçek ve hukuki durumu ile ('görüldüğü ve beğenildiği gibi') satılır ve teslim edilir. Alıcı, ürünü teslim almadan önce inceleme hakkına sahiptir ve makinenin kurulumu, emniyeti ve nihai kullanım yerinde kullanımı ile ilgili sorumluluğu üstlenir. Harici referans: 7548

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2008, Fonksiyonellik: denenmemiş, X ekseni hareket mesafesi: 4.175 mm, Y ekseni hareket mesafesi: 1.550 mm, iş parçası yüksekliği (maks.): 40 mm, milling sayısı: 30, azami seyir hızı: 80.000 mm/dak, TECHNICAL DETAILS X-axis travel: 4,175 mm Y-axis travel: 1,550 mm X-axis traverse speed: 80 m/min Y-axis traverse speed: 80 m/min Z-axis traverse speed: 30 m/min Max. workpiece height: 40 mm Number of suction traverse beams: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool change Liquid-cooled Saw unit Tool magazine 1 Number of slots: 18 Tool magazine 2 Number of slots: 10 EQUIPMENT NC positioning suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. Nodpfxsyttcwo Abdjwd External reference: 7350

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2008, Fonksiyonellik: denenmemiş, kontrolör modeli: POWERCONTROL, iş parçası uzunluğu (maks.): 4.300 mm, iş parçası genişliği (maks.): 2.200 mm, X ekseni ilerleme hızı: 80 m/dak, TEKNİK DETAYLAR Maks. panel genişliği: 2.200 mm Maks. panel uzunluğu: 4.300 mm Maks. ana testere bıçağı çıkıntısı: 125 mm Maks. ilerleme hızı: 80 m/dak Testere ünitesi Maks. takım çapı: 450 mm Nsdpjyttqzjfx Abdjwd Motor gücü: 13,5 kW Gravür ünitesi Maks. takım çapı: 180 mm Motor gücü: 2,2 kW MAKİNE DETAYLARI Kontrol ünitesi: POWERCONTROL İşleme masası Kaldırma tablası kat sayısı: 4 Pens sayısı: 10 Makine, gerçek ve hukuki durumu ile ('görüldüğü ve beğenildiği şekilde'), fotoğraf dokümantasyonları ve tanımlayıcı karakterdeki teknik/ticari belgeler temel alınarak satılıp teslim edilmektedir. Alıcı, ürünü teslim almadan önce inceleme hakkına sahip olup, kurulumu, sabitlenmesi ve makinenin nihai kullanım yerinde kullanımı ile ilgili tüm sorumluluğu üstlenir. Harici referans: 5552

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2005, Fonksiyonellik: denenmemiş, güç: 19 kW (25,83 bg), X ekseni hareket mesafesi: 4.175 mm, Y ekseni hareket mesafesi: 1.730 mm, milling sayısı: 20, Takım tareti 1'deki takım istasyonu sayısı: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverses: 8 Number of tool magazine slots: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Nwodpfx Asyttf Sjbdsd Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid cooled MACHINE DETAILS Total installed power: 19 kW Control system model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, milling cutters, and aggregates are not included in the scope of delivery. Safety fences are included subject to availability (left side only). The machine is sold and delivered in its actual and legal condition ('as seen and approved'), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6906

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2016, Fonksiyonellik: denenmemiş, kenar kalınlığı (maks.): 22 mm, dönüş hızı (maks.): 12.000 dev/dak, Donanım: CE işareti, The machine has the following configuration: - Pre-milling unit - Automatic, time-controlled intervention and positioning via NC - Lamps for preheating the panel edge - Edge strip magazine - Glue pot for EVA hot-melt adhesive - Pre-melter for EVA hot-melt adhesive QM-705 Nwodpfxeyxndbo Abdjd End trimming unit IN-801 - Number of motors: 2 Top and bottom trimming unit RS-100 - Number of motors: 2 - Motor power: 2 kW - Speed: 12,000 rpm Finishing and corner rounding unit RF-100 - Number of motors: 2 - Motor power: 2 kW - Speed: 12,000 rpm Corner rounding unit AR30 - Number of motors: 2 - Motor power: 0.8 kW - Speed: 12,000 rpm - Automatic, time-controlled intervention Cut-off unit RB02 - Positioning via NC Glue scraper unit RCC-701 Polishing unit SP-501 - Number of motors: 2 - Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS - Minimum panel height: 10 mm - Maximum panel height: 60 mm - Minimum edge thickness: 0.4 mm - Maximum edge thickness: 22 mm MACHINE DETAILS - Total connected load: 22 kW EQUIPMENT - Pressure with rubber band - Panel support guides with NC positioning - CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7673

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2004, Fonksiyonellik: denenmemiş, iş parçası yüksekliği (maks.): 60 mm, iş parçası genişliği (maks.): 2.800 mm, kenar kalınlığı (maks.): 20 mm, kontrolör modeli: IMATRONIC MT, The machine has the following configuration: Unit 1: Router with CNC positioning Unit 2: Router with NC positioning, hot-melt glue tank, hot-melt glue pre-press Edge Jointing + Edge Processing Unit 1: Edge banding unit (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling unit (1 motor) with automatic timer sequence Unit 5: Milling unit (1 motor) with automatic timer sequence Unit 6: Belt sanding unit (1 motor) Nwsdpfx Aboyttrxsdsd Unit 7: Belt sanding unit (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed chains: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the place of destination. External reference: 6561

Durumu: kullanılmış, makine/araç numarası: 005711, Max. Panel genişliği: 4500 mm Max. Panel uzunluğu: 2200 mm Max. Levha ana testere bıçağı: 95 mm Nwjdpshvm Diefx Abded Pens sayısı, uzunlamasına: 5 Pens sayısı, çapraz: 8 İkinci esnek tutma: evet