SSK200-220kW Yoğuşmalı Gaz Kazanı

SSK200-220kW SSK200-220kW

Durum: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 800 x 1170 x 2280 mm Bwsdjvz Hq Topfx Ad Rju Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and craft businesses. They have been developed for heating larger utility areas such as workshops and production spaces in craft and industrial enterprises. These hot air systems require no long heat-up phases and are capable of heating a joinery or carpentry workshop or other production facilities in a very short time. The furnaces are designed to use solid wood and its by-products as fuel, e.g. solid wood board offcuts, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces conform to the EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, as well as the safety guideline of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the emission limits stipulated by the 1st BImSchV. - Automatic mode and continuous air operation - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m3/h - Combustion chamber depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draught requirement at nominal output: 0.18 mbar - Heated volume: approx. 1,600 m3 - Heated area: approx. 300 m2 - Space requirement: width 800 mm, depth 1,170 mm, height 2,200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85 – 90 % - Required chimney draught: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet collar: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for outgoing hot air are located at the lower rear of the furnace. A maximum pipe length of 20 metres per connector is permitted for air distribution.

Durum: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. These units are specifically designed for heating larger utility spaces such as factory halls and workspaces in trade and industrial operations. These warm air systems require no lengthy heat-up phase and quickly warm the workshop, joinery, carpentry, or other production spaces. Approved fuels include solid wood and its byproducts, e.g., offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA warm air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392EC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st Federal Immission Control Ordinance (BImSchV) regarding required emission values. - Automatic and continuous fan operation - Thermal output: 14.8 kW - Thermal output Kcal: 12,720 - Fuel consumption: 4.5 kg/h - Air output: 2,400 m³/h - Firebox depth: 580 mm - Loading door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Required flue draft (nominal rating): 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² Bwodpfx Adevz Hqto Rou - Required installation space: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (suggested): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet nozzles: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet. The two warm air outlet connections are located at the rear of the furnace, towards the bottom section. A maximum of 20 meters of ducting per outlet is permitted for distributing the warm air.

Durum: yeni, - YENİ - yan paneller ve taban çerçevesi olmadan Kanuk® Orijinal sıcak hava fırını - Yanma odası açıklığı Y x G (cm): 31 x 31 - Duman borusu bağlantısı: üst / arka - Verimlilik (%): 83,9 - Kütük uzunluğu (cm): 48 - Minimum baca çekişi (Pa): 16 - Kül kutusu: Hayır - BimSchV Seviye 2: Evet - Linyit briketleri: Hayır - CE işareti: Evet - Toplam güç (kW): 17,7 - Oda ısıtma kapasitesi (m³): 540 - Görüntüleme penceresi (cm): 24 x 14 - Ağırlık (kg): 153 - Odun tüketimi (kg/saat): 4.2 Bwodpfxevyd Awo Ad Rsu - Egzoz gaz kelebeği valfi: Hayır - Tip 1 (kendiliğinden kapanan kapı): İsteğe bağlı - Kütükler, odun briketleri: Evet - AT §15a B-VG Normu: Evet - Dış hava bağlantısı (mm): 80 mm - Boyutlar Y x G x D (cm): 80 / 58 / 95 - Baca borusu bağlantısı (mm): 160 - Kapı çapı (cm): 28 - Egzoz gazı sıcaklığı (°C): 232 - Egzoz gazı kütle akışı (g/s): 14.28 - Yanma odası Y x G x D (cm): 40 x 44 x 49,5 - Ön cam yıkama: Evet - DIN EN numarası: 13240 - Birincil, ikincil, üçüncül hava: Evet - LRV İsviçre: Evet Hayır. 2100108

Durum: mükemmel (kullanılmış), Hertz enerji tasarruflu kazan 50 kw Bodjq I Nfhepfx Ad Rjwu

Durum: iyi (kullanılmış), Kroll M 150 Mobil Sıcak Hava Üretici Kullanım Alanı: • Salonların, çadırların ve şantiyelerin ısıtılması • Bahçecilik işletmelerinde veya her türlü depolarda donmaya karşı koruma • Yeni binaların hızlı kurutulması • Soğuk mevsimde ek ısıtma Yakıt: Kalorifer yakıtı EL Nominal ısı çıkışı: 135 kW Nominal ısı yükü: 150 kW Yakıt tüketimi: 12,7 kg/saat Hava debisi: 7.300 m³/saat Elektrik bağlantısı: 220 V / 6,1 A Güç tüketimi: 1,38 kW Koruma sınıfı: IP 44 Ölçüler: Bjdpfx Adexwkw Es Rowu Uzunluk: 2.600 mm Genişlik: 900 mm Yükseklik: 1.300 mm Ağırlık: 270 kg Bankamız aracılığıyla finansman da mümkündür. komplett-konzept.leasingo.de Daha fazla ürün - yeni ve ikinci el - mağazamızda bulabilirsiniz! Uluslararası nakliye ücretleri talep üzerine!