Kesme testeresi

Stromab TR 500 MATRIX

Durum: yeni, Üretim yılı: 2025, makine/araç numarası: MR006589, Yüksek kaliteli, hızlı otomatik sürgülü ve optimizasyon yazılımlı kesme makinesi. Bu makine, tebeşir çizgileri aracılığıyla malzemedeki hataları tanımlama işlevine sahip olup, aşağıdaki opsiyonlar ile donatılmıştır: - Testerenin sağında pnömatik itme silindiri - Testerenin solunda pnömatik itme silindiri - 'OPTI' paketi ile malzeme uzunluğu tanıma ve ek optimizasyon kriterleri - 'OPTI PLUS' paketi ile malzeme hatalarının fotosel ile tanınması Nedpfxoy I N Ako Apqjwl - Makine, çıkış masasıyla birlikte (metre başına) - Etiket yazıcı - MO9416XLTD Teknik Özellikler: - Gönye açısı: 90° - Maksimum kesme uzunluğu: 360 mm - Maksimum kesme yüksekliği: 135 mm - Maksimum itme uzunluğu: 6000 mm - Kesim listesi aktarımı: Evet - Tebeşir çizgi sensörü: Evet - Maksimum testere bıçak çapı: 500 mm - Motor gücü: 10 HP - Seri numarası: 10561

Durum: işlem için hazır (kullanılmış), Üretim yılı: 2020, çalışma saatleri: 1.234 h, Fonksiyonellik: tamamen fonksiyonel, besleme uzunluğu X ekseni: 7.000 mm, y ekseni ilerleme uzunluğu: 600 mm, Z ekseni ilerleme mesafesi: 250 mm, X ekseni ilerleme hızı: 80 m/dak, toplam uzunluk: 8.000 mm, toplam yükseklik: 1.800 mm, toplam ağırlık: 2.000 kg, testere bıçağı çapı: 500 mm, disk çapı: 500 mm, masa uzunluğu: 7.000 mm, Donanım: USB portu, For sale: STROMAB MATRIX TR 500 optimizing crosscut saw in excellent technical condition, used in a small production facility primarily for cutting structural timber. Utilized for the prefabrication of timber frame houses. The machine is fully operational and has been regularly serviced. Ready for immediate operation with no additional investment required. Sold with VAT invoice. OPTION TO TEST ON-SITE Nwjdswp Rvhepfx Apqol PRICE negotiable.

Durum: yeni, Üretim yılı: 2026, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical specifications of the cutting unit: Pneumatic up-stroke saw TR500 Motor power: 10 HP (7.5 kW), 400V/50 Hz TCT blade diameter: 500 mm, bore 30 mm, 144 teeth, thickness 4.6 mm Cut cycle speed: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed by rack and pinion system and brushless motor Positioning accuracy +/- 0.4 mm Powerful infeed motor for bundle weights up to 80 kg Maximum feed push system speed: 90 m/min Pneumatic lifter at end of cut cycle and overhead pusher return Data input management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Load and save machine parameters via USB port Cycle pattern (template) editing and direct input via controller Transfer of cutting lists created on PC via USB or Ethernet port Working software: Manual input of board length Partial optimization without length reading of the workpiece Cut cycle with 3 optimization options (maximum length, sequence, board order) Up to 1000 cutting lists with 11 sizes each or a single list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization. Piece length reading via photocell Cut cycle with 6 optimization criteria: (maximum length, sequence, board sequence, volume, minimal waste, and priority length) "OPTI PLUS" package: full optimization with knot and defect elimination (OPTION NOT INSTALLED ON THE MACHINE) Technical description: "OPTI PLUS" package: for removal of knots and defects Photocell for reading knots and defects in wood scanning Marking with fluorescent crayons/pencils (Note: only available in combination with ZA250) Nedpfx Ashw Ng Ijpqewl Pneumatic side clamping device PC software for creating lists in XML format

Durum: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 0 x 0 x 0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully automatic optimizing cross-cut saw TR-500 MATRIX-6000 (with full optimization) - Motor power: 7.5 kW - Saw blade diameter: 500 x 30 mm Z=144 - Cutting capacity as per cutting diagram - Cutting capacity: 135 x 280 mm - Cutting capacity: 125 x 295 mm - Cutting capacity: 95 x 325 mm - Cutting capacity: 80 x 340 mm - Cutting capacity: 55 x 360 mm - Cutting cycle: 4 seconds - Pneumatic cross-cutting unit - 8° inclined work table - Minimum workpiece thickness: 10 mm - Safety guard over cross-cutting unit - CE-compliant - Weight: 1000 kg Electrical connections: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction port: 4 x 100 mm diameter - Extraction capacity: 2400 m3/h - Air consumption per cycle: 4 Nl - Air velocity at center of extraction port: approx. 25–35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servomotor - Feed system with precision rack and pinion, position feedback via servomotor - Pneumatic pusher lift at end of cycle, top return - Photocell for workpiece length measurement - Photocell for defect detection – Marking with fluorescent chalk - 8° working surface inclination - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Cut list creation directly in the machine's control - Up to 1000 cut lists with 10 sizes each - Single list with up to 10,000 sizes in sequence Nwjdpfjv A Htdox Apqsl - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimum waste, priority) - Standard USB and Ethernet ports - Includes OPTI function for automatic measurement of workpieces to be cut. Optimal solution for processing material of variable lengths, with single or bundled feeding - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimum waste, priority) - Includes OPTI PLUS function for defect marking detection, ensuring full optimization and removal of knots and defects - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Cut list creation on PC: €360.00 - Outfeed table: €360.00/m