ÇekiciVOLVO
Arbeitsbühnen Baumaschinentransporter mit Rampen
Çekici
VOLVO
Arbeitsbühnen Baumaschinentransporter mit Rampen
sabit fiyat KDV hariç
€224.500
Üretim yılı
2025
Durumu
Yeni
Konum
Petershagen 

Resimleri göster
Haritayı göster
Fiyat ve Konum
sabit fiyat KDV hariç
€224.500
- Satıcının konumu:
- Auf der Tappenau 15, 32469 Petershagen, Almanya

Ara
Teknik detaylar
- Kilometre:
- 100 km
- Güç:
- 375 kW (509,86 bg)
- Yakıt türü:
- dizel
- Vites türü:
- otomatik
- Dingil konfigürasyonu:
- 3 aks
- Toplam ağırlık:
- 32.000 kg
- Yükleme alanı uzunluğu:
- 9.000 mm
- Yükleme alanı genişliği:
- 2.550 mm
- Emisyon sınıfı:
- Euro 6
- Renk:
- beyaz
- Donanım:
- ABS, klima, navigasyon sistemi, park ısıtıcısı
Teklif detayları
- Listeleme kimliği:
- A19742030
- Son güncelleme tarihi:
- 14.01.2026
Açıklama
4-axle Volvo machine transporter / work platform transporter
FH 500 8x2R
- Trailing axle, electro-hydraulically steered, single wheels
- Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle
- Safety long-distance driver's cab FH
- Cab parking heater, 2 kW
- 33 l cool box with freezer compartment under the bunk
- Air suspension on front axle(s)
- Gearbox / I-Shift controls via driver's seat control unit
- I-Shift driving modes: Standard, Performance, and Economy
- I-See with map-based topography and traffic data
- Eco-cruise control (cruise control), including brake cruise control
- Manual shifting in automatic mode possible (including kickdown)
- Adaptive traction control
- Adaptive cruise control (ACC) with collision warning and emergency braking function
- Lane keeping assistant
- Side collision avoidance system and turn assist (both sides)
- Driver alert system warns of fatigue
- VEB Volvo Engine Brake
- etc.
WIESE body for work platform and construction machine transport with hydraulic access ramps
With 2 pairs of wheel recesses including covers
Body dimensions:
- Length approx. 9,050 mm usable length
- Outer width 2,550 mm
- Loading height from top of floor approx. 1,050 mm unladen
- Robust, weight-optimized steel welded construction, high-volume design
- Short crossmember spacing for high point loads
- Rear end angled for low ramp angle
- Outer frame profile 90°
- Front wall in reinforced design
- Storage box inside below the front wall
- Grating floor
- Designed for 5,000 daN wheel load
- Above the axles: steel sheet toolboxes and exterior frame with anti-slip coating
Load securing:
- 9 pairs of heavy-duty lashing rings, 8 t, recessed into the outer frame
- Longitudinal beams each with Multi-X contour along entire length with numerous lashing points, 2.5 t
- 4 lashing eyes 8 t recessed at rear (left/right/center/center)
- 4 lashing eyes 8 t recessed in front of front wall (left/right/center/center)
- Outer frame profile 90°
Ramps:
Type: WFB 20 S-2
Load capacity: 18,000 kg per pair
Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm)
Platform width approx.: 850 mm per ramp
- Ramp design as 2 individual/stretch ramps, both ramps are laterally adjustable
- Ramp can be used as a loading ramp as well as a drive-through ramp for warehouse equipment (stretch section remains closed), fixed ramp part is placed onto the hall ramp
- Sturdy tension bar as transport lock (optionally with strap tensioning)
- 2 hydraulic rear supports with pads and warning sound & indicator in cab
Hedpew Itmrsfx Abcong
- Ramp and support operation via electro-hydraulics
- Control via radio remote as well as emergency control at the control block
- Control block installed in stainless steel toolbox on frame side
- Superwinch 8.2 t with steel cable approx. 20 m
- Entry handles right and left for access to the loading area
- 5 stainless steel drawer-type toolboxes, incl. lighting (optional, extra charge)
- Side panelling per sample pictures (green vehicle) optional, extra charge
- KTL coating for superstructure
- Ball-type trailer coupling at rear, 3.3 t
- 4 LED work lights
- 2 LED tail lights mounted at top of front wall
- 4 LED work lights on outside of frame as ambient lighting
- 2 LED work lights at rear
- 1 removable beacon at rear
The stock vehicle is supplied with cab in white and body in nova grey. (Painting of outer frame in RAL color as requested is possible)
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
FH 500 8x2R
- Trailing axle, electro-hydraulically steered, single wheels
- Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle
- Safety long-distance driver's cab FH
- Cab parking heater, 2 kW
- 33 l cool box with freezer compartment under the bunk
- Air suspension on front axle(s)
- Gearbox / I-Shift controls via driver's seat control unit
- I-Shift driving modes: Standard, Performance, and Economy
- I-See with map-based topography and traffic data
- Eco-cruise control (cruise control), including brake cruise control
- Manual shifting in automatic mode possible (including kickdown)
- Adaptive traction control
- Adaptive cruise control (ACC) with collision warning and emergency braking function
- Lane keeping assistant
- Side collision avoidance system and turn assist (both sides)
- Driver alert system warns of fatigue
- VEB Volvo Engine Brake
- etc.
WIESE body for work platform and construction machine transport with hydraulic access ramps
With 2 pairs of wheel recesses including covers
Body dimensions:
- Length approx. 9,050 mm usable length
- Outer width 2,550 mm
- Loading height from top of floor approx. 1,050 mm unladen
- Robust, weight-optimized steel welded construction, high-volume design
- Short crossmember spacing for high point loads
- Rear end angled for low ramp angle
- Outer frame profile 90°
- Front wall in reinforced design
- Storage box inside below the front wall
- Grating floor
- Designed for 5,000 daN wheel load
- Above the axles: steel sheet toolboxes and exterior frame with anti-slip coating
Load securing:
- 9 pairs of heavy-duty lashing rings, 8 t, recessed into the outer frame
- Longitudinal beams each with Multi-X contour along entire length with numerous lashing points, 2.5 t
- 4 lashing eyes 8 t recessed at rear (left/right/center/center)
- 4 lashing eyes 8 t recessed in front of front wall (left/right/center/center)
- Outer frame profile 90°
Ramps:
Type: WFB 20 S-2
Load capacity: 18,000 kg per pair
Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm)
Platform width approx.: 850 mm per ramp
- Ramp design as 2 individual/stretch ramps, both ramps are laterally adjustable
- Ramp can be used as a loading ramp as well as a drive-through ramp for warehouse equipment (stretch section remains closed), fixed ramp part is placed onto the hall ramp
- Sturdy tension bar as transport lock (optionally with strap tensioning)
- 2 hydraulic rear supports with pads and warning sound & indicator in cab
Hedpew Itmrsfx Abcong
- Ramp and support operation via electro-hydraulics
- Control via radio remote as well as emergency control at the control block
- Control block installed in stainless steel toolbox on frame side
- Superwinch 8.2 t with steel cable approx. 20 m
- Entry handles right and left for access to the loading area
- 5 stainless steel drawer-type toolboxes, incl. lighting (optional, extra charge)
- Side panelling per sample pictures (green vehicle) optional, extra charge
- KTL coating for superstructure
- Ball-type trailer coupling at rear, 3.3 t
- 4 LED work lights
- 2 LED tail lights mounted at top of front wall
- 4 LED work lights on outside of frame as ambient lighting
- 2 LED work lights at rear
- 1 removable beacon at rear
The stock vehicle is supplied with cab in white and body in nova grey. (Painting of outer frame in RAL color as requested is possible)
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2005
İstek gönder
Telefon & Faks
+49 5704 ... ilanlar
Bu ilanlar da ilginizi çekebilir.
Küçük ilan
Petershagen
2.512 km
Düz kasa kamyon
VOLVOArbeitsbühnen Baumaschinentransporter mit Rampen
VOLVOArbeitsbühnen Baumaschinentransporter mit Rampen
Küçük ilan
HETEREN
2.690 km
Vinç kamyonu
VolvoFMX 500 FMX 500 8x2 Euro 6 Effer 395-8S
VolvoFMX 500 FMX 500 8x2 Euro 6 Effer 395-8S
Küçük ilan
Petershagen
2.512 km
Araba taşıyıcı kamyon
VOLVOArbeitsbühnen Baumaschinentransporter mit Rampen
VOLVOArbeitsbühnen Baumaschinentransporter mit Rampen
Küçük ilan
Türkiye
251 km
JCB JS290 Uzun Erişimli Bom Kolu İmalatı
JCBJS290 Long Reach Boom-Arm Manufacturing
JCBJS290 Long Reach Boom-Arm Manufacturing
Küçük ilan
Petershagen
2.512 km
Çekici
MANBaumaschinen- Arbeitsbühnentransporter Rampen
MANBaumaschinen- Arbeitsbühnentransporter Rampen
Küçük ilan
İspanya
3.055 km
Mini ekskavatör
DaewooSO75 V PLUS
DaewooSO75 V PLUS
Küçük ilan
Deventer
2.675 km
Standart-SZM
IvecoEuroCargo 80 ML80E22 tractor with Heinemann 2 a...
IvecoEuroCargo 80 ML80E22 tractor with Heinemann 2 a...
Küçük ilan
Nowy Sacz
1.656 km
Yol silindiri
CATERPILLAR306 * Raupenbagger * Top Zustand !
CATERPILLAR306 * Raupenbagger * Top Zustand !
Küçük ilan
Stabroek
2.758 km
Paletli ekskavatör
HitachiZX135US
HitachiZX135US
Küçük ilan
Nieuwerkerk aan den IJssel
2.764 km
Damperli kamyon
MANTGS 33.400 BB CH Tipper Truck (10 units)
MANTGS 33.400 BB CH Tipper Truck (10 units)
İlanınız başarıyla silindi
Bir hata oluştu




















































































































































