Ana hidrolik silindiri

Avermann AVOS 1410

Durumu: iyi (kullanılmış), Üretim yılı: 2016, çalışma saatleri: 47.624 h, Recently arrived, more pictures and a video to follow. Baler Avermann, Model AVOS 1410 BR5 – 45/80, Press force 80 t, Year of manufacture 2016 Technical data: Manufacturer: Avermann Maschinenfabrik Model: AVOS 1410 BR5 – 45/80 Year of manufacture: 2016 Press force: 80 t Drive power: 45 kW Feed opening: 1,400 x 1,000 mm Nkjdpfx Absx Uzy Uj Ssu Throughput at 35 kg/m³: 6.0 t/h Throughput at 60 kg/m³: 10.5 t/h Throughput at 100 kg/m³: 17.5 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 600 kg, depending on material Tying method: 5-fold vertical, automatic Machine dimensions: approx. 10,850 x 2,400 x 3,800 mm (L x W x H) Machine weight: approx. 18,000 kg Remarks: The baler was dismantled from ongoing operation. A matching WESTERIA conveyor belt is optionally available. The main cylinder was replaced in November 2025. Additional photos available upon request. Please feel free to contact us. Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the stated data or for any errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by prior appointment. Sale is ex-works, payment in advance, without warranty or guarantee.

Durumu: yenilenmiş (kullanılmış), Üretim yılı: 2009, çalışma saatleri: 22.029 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 80 t, dolum açıklığı genişliği: 1.000 mm, dolum ağzı uzunluğu: 1.400 mm, balya genişliği: 1.100 mm, balya yüksekliği: 750 mm, balyanın ağırlığı: 600 kg, toplam ağırlık: 16.000 kg, güç: 45 kW (61,18 bg), son revizyon yılı: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours (as of December 2025) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed hopper dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput capacities at bulk densities of: – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weight at a bale length of approx. 1.2 m: up to 600 kg (material-dependent) PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Machine transport weight: 16 t Special features: - Wear-resistant floor made of HARDOX steel - Special press ram for compacting “difficult” materials and loose bulk materials with small particle size - Control cabinet air conditioning - 200 mm machine foot height extension Nkjdex A U Ncjpfx Ab Sou Remarks: The machine has been serviced and partially overhauled in our workshop. The following work has been carried out and parts replaced: • Disassembly of the press ram, split into components, mechanism overhauled, replacement of the following plastic wear plates and liners: o Plastic wear liners left/right below the press ram o Plastic wear liners left/right above the press ram o Central plastic main wear plate (support plate) under the press ram • Steel guide rails left/right, upper section of the frame, replaced • Complete replacement of the base plate (four-piece), made from wear-resistant HARDOX steel • Wire feed guides in the press floor re-welded and smoothed • Replacement of the counter knife (two-piece) in the frame • Blade gap adjusted to approx. 2.5 mm • Disassembly of the tying and twisting unit, split into components, mechanism overhauled, all groove and thrust ball bearings on the twisting shafts replaced, wire knives cleaned and reset, chains lubricated and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for tightness • Hydraulic oil is only one year old, chemically analyzed, still in good condition, therefore not changed and can continue to be used • General maintenance work performed Finally, the baler was tested in manual and automatic mode—see function test video of the machine.

Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2000, çalışma saatleri: 25.000 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 50 t, toplam ağırlık: 17.000 kg, boş ağırlık: 17.000 kg, Technische Daten: Avermann Maschinenfabrik GmbH & Co. KG Nkjdsw N Hlqjpfx Ab Sju Typ: AVOS 1410 BS-22/50 Baujahr: 2000 Pumpenbetriebsstunden: 25.000 Stunden Einfülltrichtermaße: 1.400 x 1.000 mm Ballengröße: 1.100 x 750 mm (Breite x Höhe), Länge variabel Antriebsleistung: 22 kW Eigengewicht: 17 t Leistung: 5,5 t/Stunde Ballengewicht: materialabhängig, bis zu 500 kg Vertikale, 4-fach Umreifung, vollautomatisch SPS-Steuerung: Siemens S7-1500 Aufstellmaße der Ballenpresse: 8.610 x 2.400 x 3.835 mm (Länge x Breite x Höhe) Sonderausstattung: Verschleißfester Boden aus HARDOX-Stahl Das Förderband ist nicht im Lieferumfang der Maschine enthalten. Dokumentation: Die vollständige Betriebsanleitung ist vorhanden. Besichtigung nach vorheriger Absprache möglich. Für die technischen Angaben und eventuelle Fehler wird keine Haftung übernommen. Zustand der Presse: Sie ist dank durchgehender Wartung betriebsbereit. Sie wurde ausschließlich zum Pressen von Papier eingesetzt. Avermann Ballenpresse Typ AVOS 1410 BS-22/50 inklusive Drahteinzugstationen und Ballenrutsche.