İşleme merkezi - hemen teslim -

Biesse Rover Multi Up M C S

CNC machining centres Rover Multi Up M C S

Working area *:
X = 3280 mm;
Y = from 1580 to 1660 mm, depending on working conditions
Z = 200 mm – 5-axis processing unit and drilling unit, with vacuum modules H=74 mm
Z = 245 mm – 5-axis processing unit and drilling unit, with vacuum modules H=29 mm
Workpiece clearance *: Y = 1900 mm
Axis travel ranges *:
X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm

VACUUM SYSTEM
Division of the vacuum system into 2 working zones and 2 clamping zones in X.
AUXILIARY VACUUM SYSTEM – 2 zones
Allows for the clamping of workpieces using vacuum templates.

Remote control RM850

Rover Multi Up M C S Panel – Multi Purpose Regular

Configuration 2
Compatible with the 16-position rotary tool changer and the 12-position side-mounted tool magazine.
The tool magazines can also be retrofitted.

Uninterruptible power supply (UPS) for the machine PC.

6 ATS workpiece supports – 18 module holders
— 6 aluminium workpiece supports. The supports are guided on linear rails with recirculating ball carriages. Clamping is performed on the front and rear linear guides using pneumatic cylinders. Clamping is released via a push-button located at the front of each workpiece support.
— 18 module holders, 132 x 132 x H 41.5 mm, with independent pneumatic clamping
The vacuum modules can be rotated in 15° increments on the module holders; an ideal solution for shaped components.
— 18 blinds for module holders without templates.

SA worktable (Set-Up Assistant) for worktables up to 1550 mm.
Supported manual positioning system with travel direction indicator and position indicator.
— Sensors on each worktable and along the X-axis of the working area.
— Display of reached direction and position for the carriage during positioning, mounted on each worktable
According to the worktable programming, the system suggests to the operator the movement direction of each worktable and carriage, and signals with a green LED and beep when the target position (tolerance: +/- 1.5 mm) is reached.

Segmentation of the pneumatic system into 2 working zones in X

Processing unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 interface, liquid-cooled – 20,000 rpm

Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle.

Flange for the preparation of a 5-axis machining unit for aggregate installation.

Coolant system

Additional Z-axis support for rear machining units, with independent Z-axis.

Drilling head BH 24 L

Side-mounted tool magazine with 12 positions in the machine bed.

Rotary tool changer with 16 positions, installed directly on the X machining unit.

Tool holder HSK F63, equipped with a long integrated flange, for saw blades on 5-axis head.

Saw blade 300 mm, for tool holder.

Lrjdey Ehrxjpfx Abasp
Hi-Tech tool set
Complete set of tools for acceptance test
Consisting of the following 9 items

Upgrade from standard PC to high-performance PC.

Digital device for measuring tool length, for diameters up to 130 mm.

bSolid

NC-HOPS 8 MacroCAM Rover 1. AV
NC-HOPS MacroCAM 1. license
WorkCenter vacuum cup suggestion
5-axis simultaneous
Material removal simulation
12-month warranty period

Location: ex stock 54634 Bitburg
- Immediately available -

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.