3 iş istasyonlu kapı merkezi

COMEC FRONTAL CN TP

TECHNICAL SPECIFICATION:

Workpiece dimensions:
Length min-max: 330/1000 mm
Thickness min-max: 10/40 mm
Width min-max: 80-350 mm

Approximate output:
From minimum 6 seconds per piece
to maximum 12 seconds per piece.

SUPPORT ARMS FOR UNITS
1+1 unit support arms, fixed left arm (machine zero point).
Movable right arm controlled by NC on X axis, servo-driven, depending on the loaded program (called up by barcode reader). Movement on linear guides.

ELEMENT MAGAZINE
Horizontal storage for elements, including:
1+1 horizontal belt conveyors, buffer for loading 3-4 pieces at once, synchronized with machine processing cycle, fixed to the arms, 0.37 kW motors.
1+1 horizontal belt conveyors for loading parts onto the feed system, fixed to the arms, 0.37 kW motors.
Complete with 1+1 pneumatically extendable front stops for referencing and alignment of parts before loading.

FEED SYSTEM
Pneumatic step-by-step feed system with 3 working stations.
Includes pneumatic clamps with fixed stroke for sequential loading of elements with random width 80 ÷ 350 mm.

CLAMPING SYSTEM
6 + 6 adjustable vertical clamping cylinders,
2 + 2 cylinders at each working station.
Compressed air cleaning devices that keep the base and clamping surfaces clean after processing.

1ST WORKING STATION - LATERAL DRILLING
Dcsdpfsw Rrrlox Aa Djn
1 + 1 opposing horizontal-side drilling units, attached to the arms.
Each unit consists of:
- Robust frame, fixed to the arms.
- NC controlled assembly on Y and Z axes, mechanical
adjustment of drilling depth on X axis via screw and
mechanical SIKO counter.
- Feed with pneumatic cylinder and hydraulic brake.
- 1.5 kW motor – 2,800 rpm.
1+1 double-spindle drill heads with 40 mm spindle spacing for use with two different tools with different diameters and lengths (for drilling depth).

2ND WORKING STATION - TENON MILLING
2 + 2 opposing horizontal milling units, attached to the arms.
Each unit includes:
- Robust structure, attached to the arms.
- Milling unit controlled by NC on X, Y, and Z axes.
- X axis serves to compensate taper according to workpiece thickness.
- Motors 8.0 kW – 9,000/12,000 rpm adjustable by inverter.
- Tool holder axis Ø 40 x 150 mm, milling cutter Ø 120 mm MAX.
- Feed rate on the axis controlled by NC, depending on the width and thickness of the workpiece.

3RD WORKING STATION - DOWEL AND GLUE APPLICATION
1 + 1 opposing horizontal units for glue and dowel application, attached to the arms.
Each unit includes:
- Robust structure, fixed to the arms.
- NC-controlled insertion unit on Y and Z axes.
- 1 glue injector with pneumatic approach.
- 1 blower for cleaning the hole, connected to glue injector.
- 1 high pressure pump.
- 2 guides (for dowels Ø 6 and Ø 12), independent from glue injector.
- 2 vibratory hoppers (for dowels Ø 6 and Ø 12).

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.