şerit testere

CORMAK BS912N

BAND SAW CORMAK BS912N

Specification:

- The material to be cut can be fed manually or by any mechanical device, while the tool feed is fully automatic.
- The arm descent speed is regulated via a hydraulic cylinder. The desired arm lowering speed is set using a valve that controls the oil flow between the cylinder chambers.
- The required linear speed of the blade is achieved by changing the ratio on the pulleys between the worm gearbox and the drive motor. The coolant tank with an electric pump is located in the machine base.
- Precision and robust construction place this model at the forefront of band saws with such a large cutting capacity—up to 230 mm—and the ability to cut at any angle from 0 to 45 degrees.
- The CORMAK BS912N band saw, featuring innovative advancements combined with renowned brand bimetal blades, is widely used in all metalworking shops where precision, quality, accuracy, and cutting speed are critical.
- The cutting angle is set with a rotary vise in a range from 0 to 45°.
- The massive vise walls are made from durable cast iron. At the rear of the vise, there is an angular scale for convenient and quick cutting angle adjustment.
- Both blade guides are equipped with a cooling system supplying coolant directly to the blade and the workpiece.
- This model includes a convenient handle for blade tensioning and quick vise clamping (of the workpiece).
- The arm is fitted with a blade tension indicator and a selection chart for blade tooth configuration and cutting speed, depending on the type of steel being cut.
Laedpfx Ajy En E Ssk Sja
- In the lower arm position (after material is cut), the blade drive is automatically switched off by a new-generation limit switch.
- Operator safety during the cutting process is ensured by an electrical system meeting all CE requirements. The machine features a limit switch stopping the machine after the cutting cycle ends, an emergency stop (safety mushroom), and a range of micro-switches which deactivate the machine when, for example, the belt cover or blade guard is opened.
- Additionally, this machine model is equipped with a wire brush for cleaning the cutting blade from chips — preventing blade clogging and ensuring more efficient cutting.
- The blade guides are equipped with special carbide plates and bearings, significantly impacting the blade’s guidance, longevity, straightness, precision, and cutting quality.
- Carbide blade guidance greatly reduces machine and blade wear.
- The arm is made from profiled spheroidal cast iron, ensuring stiffness during operation and absorbing all types of vibrations.
- The control panel is conveniently located on the saw arm.

Technical Data

Motor: 230V~, 50Hz, 1100W / 400V~, 50Hz, 1100W
Blade Dimensions: 2655x27x0.9 mm
Blade Speeds: 24/36/49/71 m/min
Cutting Angle Range: 0 to +45 degrees
Machine Packing Dimensions: 1420x500x1150 mm
Weight: 151/202 kg

INSTRUCTION MANUAL IN ENGLISH

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.