Tablo sıkıcı değirmen

FRORIEP 70000x1300mm

x-axis / mm
y-axis / mm
z-axis / mm
The boring mill is sold without clamping plates – the price refers exclusively to the boring mill itself.

Technical Specifications

Horizontal Milling and Boring Machine with Slide Sleeve

Work Area

Vertical travel of the headstock
measured from the clamping surface: 0 - 3000 mm
Horizontal travel of the column: 7000 mm
Maximum drilling depth with boring spindle only: 1200 mm
Maximum drilling depth with boring spindle and slide sleeve combined: 1300 mm
Boring spindle diameter: 150 mm
Milling spindle diameter: 240 mm
Slide sleeve diameter: 390 mm
Slide sleeve traverse: 700 mm
Spindle taper of boring spindle: ISO 50
Maximum workpiece weight: 70,000 kg
when supported on 4 prisms: 95,000 kg

Main Drive

Total speed range, adjustable from 2 – 795 rpm
Range 1 2 – 50.4 rpm
Range 2 50.4 – 126 rpm
Range 3 126 – 314 rpm
Range 4 314 – 795 rpm

Maximum drive power at nominal speed 17.5: 80 kW

Rapid traverse speed (headstock and column): 1,800 mm/min

Rapid traverse speed (boring spindle and slide sleeve): 1,400 mm/min

Fine adjustment speed (headstock and column)
medium 75 mm/min
fine 3 mm/min

Fine adjustment speed (boring spindle and slide sleeve)
medium 57.7 mm/min
fine 2.5 mm/min

Feed rate for headstock and column (milling)
Range 1 3 – 75 mm/min
Range 2 72 – 1,800 mm/min

Feed rate of boring spindle (drilling)
Range 1 0.19 – 4.7 mm/min
Range 2 2.2 – 56 mm/min
Range 3 56 – 1,400 mm/min

Special Equipment

Numerical length measuring device (horizontal and vertical)
Hnsdexdnraopfx Abcsg
Accuracy 0.01 mm

Rotary and traversing clamping table by Collet & Engelhard, Offenbach
Model Tdvmf 1.6 (see "Clamping Table" for technical data)

Rotary and traversing clamping table by Scharmann, Rheydt
Model DAV 1600

Rotary and traversing clamping table by Froriep, Rheydt

Swing crane for tool changing, maximum load capacity 500 kg


Special Tools

Carbide-tipped core drill bits for extracting core samples


Universal facing and boring head by Wohlhaupter, Frickenhausen
Model UPA7, with the following data:

1 fine adjustment index = 0.01 mm in diameter
1 fine adjustment revolution = 0.5 mm in diameter
Facing and boring range: 0 – 1,250 mm
Maximum slide travel: 210 mm

Automatic slide feed in mm/rev for facing:
0.05 – 0.10 – 0.15 – 0.20 – 0.25 – 0.30 – 0.35 – 0.40 – 0.45 – 0.50 – 0.55 –

Rapid adjustment per revolution of the
rapid adjustment spindle: 6 mm in diameter

Largest diameter of slide in zero position equals smallest
drilling diameter: 323 mm

Head height without shank: 260 mm

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.