STRECK ARAYÜZÜ REV.07 NEC

HOMAG

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2005, Fonksiyonellik: denenmemiş, iş parçası yüksekliği (maks.): 40 mm, kenar kalınlığı (maks.): 3 mm, X ekseni ilerleme hızı: 35 m/dak, dönüş hızı (maks.): 12.000 dev/dak, takım magazinindeki yuva sayısı: 48, TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 40 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Maximum feed speed: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End processing unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 Hnodpfx Agoyqybusgei 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Polishing unit 2 motors Spray system MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure applied with rubber belt Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melting device for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for edge pressing with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition ('as seen and agreed') based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 5321

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2007, Fonksiyonellik: denenmemiş, çalışma genişliği: 1.935 mm, milling sayısı: 40, plaka yüksekliği: 350 mm, çalışma uzunluğu: 6.200 mm, eksen sayısı: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge band magazines: 3 Number of tools in the tool magazine: 22 (at the rear of the machine) Drill spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X-direction: 4 Spindles for horizontal drilling in Y-direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Suction cups for securing the workpiece to be processed Safety mats at the front Hodpfeyqx U Hjx Aggjni Vacuum pump Waste chip conveyor Fixed grooving unit for making grooves in the X-direction The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the equipment prior to collection, and is responsible for installation, securing, and use of the machine at the destination. External reference: 8105

Durumu: mükemmel (kullanılmış), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Moving table (workpiece), stationary working head - Horizontal table (workpiece) Control system: PowerControl PC86 powerTouch (software: woodWOP) Safety enclosure for the working head No. 2 Safety-interlock workpiece clamping chucks in the working area WEEKE pre-positioning unit – for faster positioning of workpieces in machines with clamping grippers. Support table (workpiece support) at the infeed – outfeed table (with powered conveyor belt) Hjdpeyu S I Iefx Aggoni With automatic panel pusher Minimum workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X-Y-Z) mm: 3000 x 1000 (option: mm 1300) x 80 (2 x 40 mm) Simultaneous processing of two workpieces (in Z-axis) With separate electrical and control panel WORKING UNITS (TOP): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 kW No. 42 independent vertical drilling spindles (drill head power: 2.3 kW) No. 10 independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 grooving saw unit (pivotable 90° in X-Y direction), diameter 125 mm No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power: 6 kW) WORKING UNITS (BOTTOM): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 kW No. 42 independent vertical drilling spindles (drill head power: 2.3 kW) No. 10 independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 grooving saw unit (pivotable 90° in X-Y direction), diameter 125 mm No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power: 6 kW)

Durumu: mükemmel (kullanılmış), Üretim yılı: 2018, Fonksiyonellik: tamamen fonksiyonel, Teknik Özellikler: Kesim uzunluğu: 4300 mm Kesim genişliği: 4300 mm Testere bıçağı çıkıntısı: 80 mm Kontrol ekranı sağ tarafta Makine tablası tamamen hava yastıklı Program çit ileri hızı: 25 m/dk Program çit geri hızı: 90 m/dk Standart pensler: 225, 325, 475, 775, 1075, 1825, 3425 mm Power Concept – Farklı enlerde kesimlerin aynı anda yapılmasına olanak verir, verimlilikte %40’a kadar artış sağlar Baskı kirişi yükseklik kontrolü Testere arabası hızı: 130 m/dk Ana testere motoru: 11 kW, pnömatik kaldırmalı Çizici testere ünitesi: 1,5 kW, pnömatik kaldırmalı Çizici testere elektronik ayarı kontrol ekranından yapılır 4 adet hava yastıklı masa: 2160 x 650 mm Etiket yazıcı 400V 50Hz Kontrol Touch dokunmatik ekran monitörü Ağ ve USB portu üzerinden veri transferi Hedpfx Ageyuw Umsgjni CE Eco Plus teknolojisi ile enerji tüketiminde %20’ye kadar tasarruf

Durumu: mükemmel (kullanılmış), TEK TARAFLI KENAR BANTLAMA MAKİNESİ (Sol) Kenar (rulo halinde bant) kalınlığı (Min/Maks) mm 0,3 / 3 Şerit/Kenar kalınlığı (min/maks) mm 0,4 / 20 Panel kalınlığı (min/maks) mm 8 / 60 YENİ (2024) Sayısal Kontrol EDGETEQ MOD - Power Touch (WoodCommander) Ayarlanabilir besleme hızı 25 m/dk’ye kadar Besleme sistemi EZ 14 Püskürtme ünitesi (Yapışmayı önleyici sıvı) Hnedoyt Izbspfx Aggoi Besleme çiti, NC ile ayarlanabilir Ön freze ünitesi (dikey ek frezeleri) 2 x 3 kW Tutkal Ünitesi (P.U.R. Tutkal + Quick Melt sistemi) Bant basınç bölgesi, NC ile ayarlanabilir Kenar bobin destek ünitesi (2 makara ile) Uç kesme ünitesi HL 84 (2 x 0,5 kW) pnömatik döndürme ve ayar Kaba düzeltme ünitesi BF 20 (2 x 1,5 kW) Çok Fonksiyonlu Ünite (Profil kontur düzeltme) FK 11 (2 x 0,4 kW) Profil kenar kazıma ünitesi Son işlem ünitesi (Tutkal kazıyıcı + Polisaj ünitesi) FA 11 Panel Döndürme Sistemi “LIGMATECH” Mod. ZHR 541/L/095 (Portal köprü ve 360° dönebilen vakum başlığı ile)

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2005, Fonksiyonellik: denenmemiş, güç: 19 kW (25,83 bg), X ekseni hareket mesafesi: 4.175 mm, Y ekseni hareket mesafesi: 1.730 mm, milling sayısı: 20, Takım tareti 1'deki takım istasyonu sayısı: 18, TECHNICAL DETAILS Hnjdpfx Asyttf Sjggji Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverses: 8 Number of tool magazine slots: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid cooled MACHINE DETAILS Total installed power: 19 kW Control system model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, milling cutters, and aggregates are not included in the scope of delivery. Safety fences are included subject to availability (left side only). The machine is sold and delivered in its actual and legal condition ('as seen and approved'), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6906

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2008, Fonksiyonellik: denenmemiş, X ekseni hareket mesafesi: 4.175 mm, Y ekseni hareket mesafesi: 1.550 mm, iş parçası yüksekliği (maks.): 40 mm, milling sayısı: 30, azami seyir hızı: 80.000 mm/dak, TECHNICAL DETAILS X-axis travel: 4,175 mm Y-axis travel: 1,550 mm X-axis traverse speed: 80 m/min Y-axis traverse speed: 80 m/min Z-axis traverse speed: 30 m/min Max. workpiece height: 40 mm Number of suction traverse beams: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool change Hedpfoyttcwex Aggjni Liquid-cooled Saw unit Tool magazine 1 Number of slots: 18 Tool magazine 2 Number of slots: 10 EQUIPMENT NC positioning suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 7350

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2008, Fonksiyonellik: denenmemiş, kenar kalınlığı (maks.): 3 mm, X ekseni ilerleme hızı: 25 m/dak, dönüş hızı (maks.): 12.000 dev/dak, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multi-function Model: FK13 Number of motors: 2 Automatic tool changer NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Trimming Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Hodpfsytr Hbox Aggoni Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Installed total power: 35 kW EQUIPMENT Spraying unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the place of destination. External reference: 6216

Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2012, Fonksiyonellik: tamamen fonksiyonel, güç: 15 kW (20,39 bg), giriş voltajı: 400 V, giriş frekansı: 50 Hz, iş parçası yüksekliği (maks.): 60 mm, kenar kalınlığı (maks.): 3 mm, yükseklik ayar tipi: elektrikli, X ekseni ilerleme hızı: 25 m/dak, toplam uzunluk: 7.845 mm, son revizyon yılı: 2025, Donanım: CE işareti, dokümantasyon / kılavuz, HOMAG Аmbition 2260 Hnsdpfxsyu S Iuj Aggsi

Durumu: yeni gibi (kullanılmış), Üretim yılı: 2020, makine/araç numarası: 0-240-75-0703, giriş frekansı: 50 Hz, giriş akımı türü: trifaze, NEUER PREIS NUR 85.000 EURO!!! Preis gültig nur bis 20. April 2026! Jetzt die Gelegenheit nutzen! AKTUELL: Die Maschine ist bis 15. April 2026 reserviert. Bei Interesse an einem Kauf senden Sie uns bitte eine Nachricht – wir setzen Sie gerne auf die Warteliste. Zum Verkauf steht eine NEUE, hervorragend ausgestattete Plattensäge HOMAG SAW-TEC B-400 Pro Line in der erweiterten Ausführung für automatischen Lagerbetrieb. Die von uns angebotene Säge ist ABSOLUT NEU. Sie wurde 2020 bei HOMAG POLSKA Sp. z o.o. gekauft und direkt vom Hersteller an unseren Standort geliefert. Das Homag-Serviceteam hat die Maschine lediglich in Betrieb genommen – seitdem wurde sie nicht genutzt! In der Branche bedarf weder das Modell noch die Marke Homag einer Vorstellung: Homag gilt als Weltmarktführer für moderne, hochwertige Bearbeitungsmaschinen. Unser Modell ist äußerst umfangreich ausgestattet und bietet nahezu jede Zusatzausstattung. Eine vergleichbare Säge in der Grundausstattung kostet zwischen 100.000–110.000 EURO netto (425.000–467.500 PLN netto)*, während unsere erweiterte Version – lagerkompatibel und mit Zusatzoptionen – etwa 190.000 EURO netto (807.500 PLN netto)* kostet. Vorteile: • Hohe Produktivität durch automatisches Beladen und großen Sägeblattvorschub • Effizient und platzsparend • Für optimalen Materialfluss und präzise Logistik ausgelegt • Für vernetzte Produktionsprozesse geeignet Wir stehen in direktem Kontakt mit dem Hersteller HOMAG und können umfassenden Support für Montage und Inbetriebnahme beim Käufer vor Ort anbieten. Der von uns gewährte Preisnachlass – über 45 % gegenüber einer neuen Maschine – ist eine attraktive Option für alle, die aktuell eine moderne, lagerfähige Säge suchen, oder für Kunden, die auf diese Funktionalität in Zukunft Wert legen könnten. Dies bedeutet eine Ersparnis von ca. 90.000 Euro netto bzw. ca. 400.000 PLN netto*. Die Säge kann selbstverständlich auch ohne Anbindung an ein automatisches Lagersystem betrieben werden. Hnsdpfx Ajyu Spxoggei Allgemeine Hinweise zum Angebot: • Das Gerät ist NEU (Baujahr 2020), daher keine Gewährleistung/Garantie • Rückgabe ist ausgeschlossen • Der Angebotspreis versteht sich zzgl. MwSt. (23 % für polnische Käufer). Bitte beachten Sie die Preisangaben in der Anzeige. • Einzelbesitz * 1 EUR = 4,25 PLN Willkommen! Wir verfügen über zahlreiche Immobilien in Polen und sind als Bauträger von Häusern und Wohnungen in Warschau tätig. Sämtliche Maschinen in unseren Angeboten sind unser Eigentum, erworben durch Abwicklung mit unseren Mietern aus der Möbelbranche. Wir kennen die Historie und den Zustand der Maschinen und können unsere Beschreibungen belegen. Für weitere Unterstützung stehen weiterhin die Hersteller Homag, Otto Martin, OMC Machinery und FANUM zur Verfügung. Da wir diese Maschinen selbst nicht benötigen, gestalten wir die Preise äußerst attraktiv, insbesondere weil die Maschinen praktisch unbenutzt sind. Unterstützung beim Transport innerhalb Polens oder der EU ist möglich. Besichtigung der Maschinen vor dem Kauf ist ausdrücklich erwünscht.