100 t balya presi, konveyör teknolojili VK 8818 R-FU

HSM GmbH + Co. KG, Deutschland VK 8818 R-FU

Technical Data of the Baler:

Manufacturer: HSM GmbH + Co. KG, Germany
Type: VK 8818 R-FU
Year of Manufacture: 2015
Operating Hours: 19,750 hours as of July 2025
Number of Bales Produced: 24,760 bales as of July 2025
Main Pressing Force: 1,000 kN
Specific Pressing Force: 120 N/cm²
Pressing Force of Cut Edge Ejector: 121 kN
Feed Chute Dimensions: 970 x 1,800 mm
Theoretical Cycle Time (Idle): 8.3 seconds
Theoretical Throughput Rate: 643 m³/hour
Bale Dimensions: 1,100 x 750 mm (length adjustable between 600 and 2,000 mm)
Drive Power: 2 x 45 kW, frequency controlled
Installed Power: 110 kW
Total Current Consumption: 213 A
Main Fuse: 250 A, slow-blow
Binding: 5-fold horizontal, fully automatic
Throughput Rates at Bulk Densities:
- 20 kg/m³: 12.86 t/hour
- 50 kg/m³: 32.15 t/hour
Bale Weights (approx. 1.2 m bale length): 650 to 750 kg/bale, depending on material
Hydraulic Oil Tank Capacity: 2,000 L HVI 46
PLC Control: Siemens S7-300
Control Panel: Siemens TP 700
Press Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H)
Installation Footprint (press with conveyor system): 35,000 x 8,480 x 7,745 mm (L x W x H)
Press Weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t)

Special Machine Equipment:
- Access lock via key transfer system
- Electro-hydraulic locking of the press ram during the tying process to maintain position for highly expansive materials

Additional Ordered Special Equipment:
- Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy saving compared to the standard motorization of 2 x 45 kW, at equivalent performance
- Manual activation or deactivation of the number of wire bindings to save tying wire when processing non-expansive material
- Cut edge ejector with 121 kN pressing force
- Wire monitoring sensors with press shut-off in the event of wire breakage or end of wire
- Bale slide/chute
- Optical warning signal, mounted on the control cabinet

Condition of the Baler:
The entire press system (baler and conveyor technology) is in good, operational condition, and is cleaned weekly, lubricated according to manufacturer specifications, and maintained by the operator.

Technical Data for Chain Belt Conveyor:

Cjdpfx Asxb Dvved Aorh
Manufacturer: Stadler Anlagenbau GmbH
Type: Chain Belt Conveyor KF 1800
Year of Manufacture: 2015
Belt Speed: 0.36 m/second
Feed Belt Length: 7,000 mm
Inclined Belt Length: 14,500 mm
Gooseneck Length: 1,550 mm
Incline: 30°
Nominal Width: 1,800 mm
Usable Width: 1,638 mm
Total Conveyor Height: 7,745 mm
Pit Dimensions for Conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H)

Scope of Delivery:
For sale: the feed conveyor, transverse distribution conveyor, and the baler, including bale chute but without wire feeding stations and without wire.

Remarks:
Complete documentation (operating manual, CE declaration, electrical/hydraulic schematic) is available. Inspection is possible by appointment. We assume no liability for technical data or possible errors.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.