Taşıma bandı dahil balya presi VK 8818 R-FU

HSM GmbH + Co. KG, Germany HSM VK 8818 F-RU

Technical Data of the Baler:

Manufacturer: HSM GmbH + Co. KG, Germany
Model: VK 8818 R-FU
Year of manufacture: 2012
Total operating hours: 12,078 hours (as of September 2025)
Pump operating hours: 6,616 hours (effective pump running time)
Number of bales produced: 65,792 (as of September 2025)
Main press force: 880 kN
Specific pressing force: 120 N/cm²
Shear edge ejector press force: 120 kN
Feed hopper dimensions: 970 x 1,800 mm
Theoretical cycle time (idle): 8.3 seconds
Theoretical throughput capacity: 643 m³/hour
Bale dimensions: 1,100 x 750 mm, length variable 600 up to 2,000 mm
Drive power: 2 x 45 kW, frequency-controlled
Connected load: 98 kW
Total current consumption: 192 A
Protection: 250 A slow-blow
Tying: 5-fold horizontal, fully automatic
Throughput rates at:
Bulk density 20 kg/m³: 12.86 t/hour
Bulk density 50 kg/m³: 32.15 t/hour
Bale weight at approx. 1.2 m bale length: 650 up to 750 kg/bale (depending on material)
Hydraulic tank volume: 2,000 L HVI 46
PLC control: Siemens S7-300
Control panel: Siemens TP 700
Baler dimensions (assembled): 18,000 x 4,300 x 3,270 mm (L x W x H)
Total system footprint (baler with conveyor technology): 18,000 x 22,000 x 5,765 mm (L x W x H)
Weight: approx. 30 t (main press approx. 20 t, press channel with bale clamp approx. 10 t)

Special machine features:
- Access lock system using key transfer system
- Electro-hydraulic locking of the press carriage during the tying process, ensuring the press ram remains stationary with highly expansive materials

Additional optional equipment ordered:
- Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard drive (2 x 45 kW) at identical performance
- Manual enable/disable selection of strapping wire count to save wire with non-expansive materials
- Shear edge ejector with 121 kN pressing force
- Wire monitoring via sensors, with press stop in the event of wire breakage or wire end
- Bale chute
- Optical warning signal, mounted on control cabinet

Condition of the baler:
The complete baling system (baler and conveyor technology) is in good, ready-to-operate condition.

Technical data of the chain belt conveyor:
Manufacturer: Stadler Anlagenbau GmbH
Model: Chain belt conveyor KF 1800
Year of manufacture: 2012
Drive power: 7.5 kW
Belt speed: 0.05 – 0.4 m/sec
Length of feeder belt: 6,000 mm
Feed belt side wall height: 400 mm
Length of incline belt: 9,000 mm
Incline belt side wall height: 800 mm
Swan neck length: 1,500 mm
Incline: 30°
Nominal width: 1,800 mm
Usable width: 1,700 mm
Chjdpfx Adoxcngnj Asc
Belt quality: EP-500/4
Steel cleats on rubber belt: 50 x 50 mm
Hollow pin chain, pitch 125 mm, rollers 36 mm
Height of drive axle above ground: 4,284 mm
Overall conveyor height: 5,765 mm
Transport dimensions (feeder belt): approx. 7,000 x 2,200 x 1,250 mm (L x W x H)
Transport dimensions (incline belt): 13,000 x 2,500 x 2,900 mm (L x W x H)
Pit dimensions for conveyor: 14,765 x 3,260 x 1,250 mm (L x W x H)

Scope of supply:
For sale are the feeder conveyor, the baler (including bale chute), and the wire feed stations, but without wire.

Remarks:
All documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available in full. Inspection is possible by appointment. No liability is assumed for technical specifications or possible errors.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.