Balya makinesi VK 4812

HSM GmbH + Co. KG Ballenpresse, VK 4812

Technical Data – Press:

Manufacturer: HSM GmbH + Co. KG
Model: VK 4812
Year of Manufacture: 2014
Operating Hours: 5,612 hours as of August 2025
Pressing Force – Main Press: 48 t
Specific Press Force: 58.2 N/cm²
Feed Hopper Dimensions: 1,250 x 1,020 mm
Theoretical Cycle Time: 11.2 sec
Theoretical Throughput Capacity: 332 m³/hour
Bale Dimensions: 1,100 x 750 x 600 to 1,200 mm
Drive Power: 30 kW
Total Connected Load: 32 kW
Rated Current: 59 A
Tying: 4-fold horizontal, fully automatic
Throughput capacities (material-dependent):
- Bulk density 20 kg/m³: up to 6 t/hour
- Bulk density 50 kg/m³: up to 13 t/hour
Bale weight: up to 550 kg, depending on material
PLC controller: Siemens SIMATIC S7-200
Control panel: Siemens HMI Touch Panel
Hydraulic oil tank capacity: 300 L
Oil type: HVI 46
Machine installation dimensions with bale chute: 10,046 x 4,387 x 2,705 mm (L x W x H)
Transport dimensions press: 8,500 x 2,500 x 2,750 mm (L x W x H)
Machine weight press: approx. 12 t
Crsdpsvtpq Hsfx Ab Toh

Scope of Delivery:
- HSM VK 4812 baler, without hydraulic oil, without conveying technology
- Two wire spool boxes for 8 x 40 kg wire spools, without wire
- Bale chute
- Machine documentation in German

Notes:
The press is equipped with an oil cooler and volt-free contacts for external control. The operation is carried out at the control cabinet located on the left in pressing direction; the needle unit is on the right and can be folded down to the rear for transport.

The press has been partially overhauled and tested in our workshop, see photos.

The documentation (operating manual, CE declaration, electrical/hydraulic schematics) is available in German. Viewing by appointment is possible. We assume no liability for the technical data or any possible errors.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.