Film kompozitler için kızılötesi kürleme fırını

IBT Infra Bio Tech GmbH Infrarot Aushärteofen

Manufacturer
IBT.lnfraBioTech GmbH
Item no. 3200 0088

Technical Specifications
Condition like new; rarely used from test series
Functionality fully operational
Year of manufacture 2018
Connected load 58 kW
Cooling capacity, water connection on site 30 kW
Conveyor length 7,000 mm
Conveyor width 310 mm
Infeed height 55 mm
Infeed width 308 mm

TECHNICAL DETAILS
Pgodpfx Aownm Ukef How
Application: Continuous curing oven for film adhesive bonding technology
Component temperature: max. 100°C
Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm
Overall height without control cabinet: 2,000 mm
Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm
Base frame made of adjustable stainless steel profiles: ± 30 mm

Conveying System
Vacuum conveyor belt made from silicone, 310 mm wide
Transport speed: max. 5 m/min
Conveyor height: 950 mm ± 30 mm
Belt infeed/outfeed openings (WxH): 308 x 35 mm
Free area at infeed: approx. 750 mm
Free area at outfeed: approx. 750 mm

Conveyor operation:
Continuous, speed adjustable up to 5 m/min,
aligned by centering on roller guides with photoelectric safety sensors at both infeed and outfeed. Loading and unloading are performed manually.

Intended Use
The curing oven is a conveyor system for continuous operation at a maximum conveying speed of 5 m/min. Open areas at the infeed and outfeed enable manual loading and unloading of parts. Between these is the enclosed heating section with six height-adjustable IR modules. The component temperature is max. 100°C and is used to heat solvent-free adhesive between composite films. The return run of the belt, the backs of the IR modules, and the space above the heating modules are water-cooled. Parts are held on the conveyor by vacuum. The control cabinet is installed externally, separated from the machine and outside the cleanroom.

The system operates in a cleanroom according to EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The unit is exclusively intended for heating film composites.

Features
- Six individually adjustable infrared heating modules, each with six infrared emitters
- Six pyrometers for precise temperature monitoring
- PU conveyor belt for efficient material flow
- Integrated control and regulation system
- Height-adjustable stainless steel support frame
- Vacuum conveyor belt
- Cooling water distribution integrated in base frame (G1")
- Water cooling for the belt return and IR module backs
- Mechanically interlocking service doors
- Operator panel mounted on the left side at infeed
- Control cabinet cooling unit, water connection on site

History
This oven was designed for use in a cleanroom environment and only used to a limited extent for test series. It was intended for curing solvent-free adhesives between laminated films.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.