Seramik pimler için presleme cihazı

Iwesa O-PC-SE-P

Press-in device for ceramic pins in rotor shafts

Operating principle:

The ceramic pins are fed by a vibrating bowl feeder via a pneumatic hose to an inspection station, where the position of any existing unilateral bore is checked using an optical sensor.
Incorrectly oriented parts are transferred by a pneumatic slide into a collection container.
Correctly oriented pins are then conveyed through another pneumatic hose to the separator of the press-in tool.

The actual pressing process is also performed pneumatically using a plunger guided by a roller bearing.
Initially, a manually adjustable pressure p1 is used to ensure that the pin is not pressed into the shaft too easily.
With a second manually adjustable pressure p2, the pin is then pressed up to the stop into the rotor shaft.
A disc spring package preloaded to 5,000 N prevents excessive force being applied to the pin and the shaft.

The rotor shaft must be manually inserted into, removed from, and clamped in the tool by an operator. This process is safeguarded by a safety light curtain.

Construction:
Self-supporting station integrated into a complete system for pressing ceramic pins and balls.

Rotor shafts
Ø: 5 - 20 mm
L: 50 - 200 mm

Bdsdpfxeib H U Dj Al Ijb
Ceramic pin
Ø: 3 mm
L: 5 +/- 0.2 mm

Cycle time
Output: 15 strokes per minute

Safety
Safety door with interlock switch
Category 4 light curtain
Emergency stop

Airborne noise emission
Continuous sound pressure at workstation: 70 dB (A)

Electrical connection
Voltage: 230 V AC
Frequency: 50 Hz
Fuse: 10 A

Compressed air connection
Operating pressure: 5 - 7 bar

Dimensions
L x W x H = 850 x 950 x 1020 mm
Weight: approx. 110 kg

Year of manufacture: 2003

Electrically height-adjustable worktable

Documentation and circuit diagrams available.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.