Jowat yapıştırıcı EVA sıcak tutkalı

JOWATHERM JOWAT 280.30/ 280.31

EVA Hotmelt without Filler 280.30/31

Application Examples:
Edge Banding
For bonding thermoplastic edge bands (such as ABS, PP, PVC), resin-impregnated decorative paper edge bands, veneer edge bands (with/without nonwoven backing), and solid wood edging.
As a general rule, the bonding characteristics and the surfaces to be adhered, including any rear-side priming or other surface treatments of the substrates, must be checked for suitability with respect to the specific application prior to use.

Processing Instructions:
Automatic feeding systems can be used for processing the adhesive granules. The ambient temperature should not exceed 30°C.
Different types of hotmelt adhesives may be incompatible with each other depending on the formulation. Therefore, we recommend thoroughly cleaning the application equipment when changing products. For further information, please contact us.
Processing characteristics may vary depending on the application technology used and the feed speed, which can affect the bonding process.
Customer trials are necessary!

Typical Product Data:
Processing temperature [°C]: 180 – 200
Bjdpfx Aqox Sqnvexodc
Feed speed [m/min]: 10 – 40
Appearance: Final digit 0 = yellow, opaque
Final digit 1 = white
Density at 20°C [g/cm³]: approx. 1.03 ± 0.03
Softening point [°C]: approx. 90 ± 5 (Kofler hot bench)
Viscosity at 190°C [mPas]: approx. 66,000 ± 10,000
Heat resistance [°C]: approx. 80 ± 5
Open time at 190°C [s]*: approx. 6 ± 2
Setting time: not applicable
* measured on a 200 μm film
Product data determined according to Jowat testing methods.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.