Granülatör, plastikler için granülatör

mütek MVZ 7,5 kW

Granulator MVZ 7.5 kW
Demonstration machine available at special price

Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic components or for secondary size reduction of wood chips. More details available after a test run with your material.

Our granulators are used for processing a wide variety of materials such as plastics or wood. Shredders and granulators are suitable for a broad range of size reduction tasks.

For example, injection moulding machines often produce reject parts and sprues that need to be reprocessed. At blow moulding machines, besides rejects, there are also waste pieces and start-up purges. Suitable for processing various blow-moulded materials such as PET bottles, PE/PP bottles, canisters or buckets, and pipes.

Material is fed from above through a hopper into the granulator’s grinding chamber. The internal rotor is equipped with cutting knives. Material is cut between the rotating knives and the stationary knives inside the grinding chamber, until it has been reduced to the desired regrind size and falls through the screen located beneath the rotor. *Optional: the ground material is then typically transported pneumatically into big bags, silos, or other containers.

The price applies to the shredding plant as shown in picture 1 – fan, cyclone, and filter are optional extras.

---
Technical data:

Granulator MVZ 7.5 kW
Motor: 7.5 kW
*Larger plants available on request (4 to 75 kW)

Throughput up to 120 kg/h when shredding plastics *depending strongly on screen and material

Application example: Shredding PE 1000 plastic
Feed material: approx. 40 mm chip length
Secondary size reduction to approx. 6 mm
Throughput up to 50 kg/h with 6 mm screen
(Throughput up to 80 kg/h with 8 mm screen)
Pjdpfsd N Dn Dsx Ahvogn

___
Significantly higher throughput rates can be achieved when re-shredding G30 wood chips.
Up to max. 400 kg/h with a 10 mm screen. *metered feed, e.g. via conveyor belt or auger
Details after testing with approx. 30 kg sample.

Rotor diameter: 180 mm
6 rotor knives, each 225 mm long
4 stator knives, each 225 mm long
Dimensions: 930 x 730 x 1420 mm

Weight: 450 kg
Suction nozzle: 100 mm
Screens: 5, 6, 8, 10, 12, and 15 mm – other sizes available on request,

Price per screen: €390
Replacement knife set: €679

Suitable for, for example:
- All types of plastic waste
Various materials – HDPE, LDPE, PP, PS, PC, PA
- Biomass
- Wood
- Herbs
and more.

Parts from injection moulding, blow moulding, injection moulding scrap, small bottles, cables, small pipes, profiles, etc.

---
Larger systems also available as options:

Granulator MVZ / 18.5 kW
Throughput up to 350 kg/h *depending on screen and material
Opening: 620 x 400 mm
*optional with matching suction/transport system

Granulator MVZ / 30 kW
Throughput up to 400 kg/h *depending on screen and material
Opening: 620 x 500 mm
*optional with matching suction/transport system
---

For correct machine configuration, the following details are important:
- Length x width x height of input material?
- Screen size, to which size (mm) should it be reduced?
- Required hourly throughput in kg?
- Wall thickness in mm?
- Material description
Photos are also helpful

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.