Kullanılmış Sıcaklık Test Odası -70°C Ila +180°C satın al (74.996)

Koşul: mükemmel (kullanılmış), Vötsch Model: VT 7012 S2 Water-cooled Two-chamber configuration Hot chamber: The temperature control range for the hot chamber is from +50°C to +220°C Temporal temperature deviation at center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate Heating: 11 K/min Cold chamber: Temperature control range for the cold chamber: -74.5°C to +70°C Temporal temperature deviation at center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Kjdpfox Hhfhox Ab Ijlt Test chamber dimensions: width 470 mm, depth 650 mm, height 410 mm External dimensions: width 930 mm, depth 2115 mm, height 1970+ mm Port diameter: 67 mm Voltage: 3/N/PE AC 400V +6/-10% 50Hz Nominal power: 10 kW Nominal current: 25 A Refrigerant: R-452A / R-23 Weight: 1000 kg Important information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Recharging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical details are subject to change and error!) If you have further questions, we are happy to assist you by phone.

Üretim yılı: 2000, çalışma saatleri: 104.382 h, Koşul: mükemmel (kullanılmış), Vötsch Shock Test Chamber VT 7012 S2 System for Extreme Temperature Changes The temperature shock testing chamber evaluates the resistance of components, devices, and other products to rapid changes in ambient temperature. Test specimens are subjected to rapid temperature changes in air, exposed to alternating upper and lower temperature loads. Through these cyclic stresses and the accelerated aging caused by temperature fluctuations, potential weak points in the specimen can be identified. - Vertical arrangement of test chambers - Ball screw drive ensures safe guidance of the test basket - Basket load capacity: 50kg (for VT3 7012 S2) - Surrounding mesh in the basket secures specimens - High air recirculation rate, short temperature change intervals, and uniform temperature distribution in the test chamber - Hot chamber can be used as a temperature conditioning storage; cold chamber can be used as a temperature change unit - Minimal energy consumption - No compressed air required Manufacturer: Vötsch Model: VT 7012 S2 Type: Temperature Shock Test Chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Cooling unit: water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen connection External Dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test Chamber Dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection Class Device: IP 42 Control panel: IP20 Control cabinet: IP 54 Specifications for Temperature Testing in Single Chamber Operation | Temperature range: Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Kljdpfx Abox Exmto Iet Temporal temperature deviation: ±2 K (in stabilized condition) Spatial temperature deviation: ±2 K (in stabilized condition in the basket) Heating rate (hot chamber): 11 K/min Cooling rate (cold chamber): K/min Heating rate (cold chamber): 2 K/min Cooling rate (hot chamber): K/min Observation window: 355 x 355 mm Port: 67 mm Year of manufacture: 2000 Operating hours: 104,382 Weight: 1,000 kg Financing through our partner bank is available. komplett-konzept.leasingo.de You will find more items – new and used – in our shop! International shipping costs available upon request!

Koşul: iyi (kullanılmış), Type: TS -70/1000-10 For sale: CTS Temperature Test Chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, The compressor has been replaced! Equipment: - Multi-touch control system - USB and Ethernet interfaces - Feed-through ports for test cables: 4 × Ø 125 mm - Safety temperature limiter Application areas: - Environmental and lifetime testing - Temperature cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: Height: approx. 1000 mm, Width: approx. 860 mm, Depth: approx. 1100 mm Kljdsxdi Ezopfx Ab Ist External dimensions: Height: approx. 1950 mm, Width: approx. 1270 mm, Depth: approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3 K over time, Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerants: R404A / R23 Weight: 1000 kg For your peace of mind as a buyer, please note the following information! The following procedures are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical details subject to change and errors excepted!) We are happy to answer further questions by phone.

Koşul: mükemmel (kullanılmış), Beyaz Tür: WK3-340/70 Weiss iklim test odası hava soğutmalı Kontrol paneli »Dokunmatik panel« Dokunmatik panel kontrol ünitesinde, fonksiyon sembollerine dokunmanız yeterlidir tüm kontrol ve işletme komutları tetiklenir. Ayarlanabilir ayaklar Zemindeki dengesizlikleri telafi etmek ve makine bölümünün yeterli havalandırılmasını sağlamak için, Test kabini ayarlanabilir ayaklarla donatılmıştır. Uygulamalar Test kabini sağ ve sol tarafta besleme delikleri ile donatılmıştır. Bu sayede ölçüm kabloları ve test ekipmanlarının test odasına yerleştirilmesi mümkün olmaktadır. Temel ekipmana entegre uygulama R1: KB 125 mm L1: KB 85 mm Hacim 335 litre Test odası boyutları: Test odası boyutları: yükseklik 750 mm, genişlik 580 mm, derinlik 765 mm Dış boyutlar: yükseklik 1775 mm, genişlik 870 mm, derinlik 1600 mm Sıcaklık testleri için veriler: Minimum sıcaklık –72°C Ksdpfx Asv Sr Hzsb Ijlt Maksimum sıcaklık +180°C Sıcaklık sapması, zamansal ± 0,1 ila ± 0,5 K Sıcaklık homojenliği mekansal olarak ± 0,5 ila ± 1,5 K Sıcaklık değişim oranı, soğutma 3 K/dak Sıcaklık değişim oranı, ısıtma 3 K/dak İklim testleri için veriler: Sıcaklık aralığı +10°C ila +95°C Çiy noktası aralığı -3°C ila +94°C Nem aralığı %10 ila %98 bağıl nem. Sıcaklık sapması, zamansal ± 0,1 ila ± 0,3 K Sıcaklık homojenliği mekansal olarak ± 0,5 ila ± 1 K Zamana bağlı nem sapması ± %1 ila ± %3 bağıl nem İşletmeye ilişkin veriler: Test odası aydınlatma halojen ampul 2 x 24V, 50W Nominal voltaj: 3/N/PE AC 400V ±10% 50Hz Anma akımı: 16 A Anma gücü 4,9 kW Müşteri tarafından sağlanan sigorta 16 A yavaş darbe Soğutucu: R-452A/R23 Ağırlık yaklaşık. 585 kilo Alıcı olarak güvenliğiniz için aşağıdaki bilgileri dikkate alınız! Sunulan odalarımızda aşağıdaki hususlar önceden gerçekleştirilir: 1. Fonksiyonel kontrol ve gerekli bileşenlerin değiştirilmesi 2. Gerekirse, yasalara uygun soğutucu ile doldurun 3. Sertifikalı sızdırmazlık testi 4. Doğrulamanın başarıyla tamamlanmasının ardından odalar belgelendirilmiş bir test çalışmasına tabi tutulur. Durum: kullanılmış Teslimat kapsamı: (Resme bakınız) (Teknik verilerdeki değişiklik ve hata hakkı saklıdır!) Telefonla aklınıza takılan diğer soruları yanıtlamaktan mutluluk duyarız.

Koşul: mükemmel (kullanılmış), Weiss Thermal Shock Test Chamber We are offering a thermal shock test chamber from Weiss. Weiss Thermal Shock Test Chamber, Air-Cooled (The compressor has been replaced!) Specifications: Temperature Range Hot Chamber: +60°C to +220°C Temperature Range Cold Chamber: -10°C to -80°C Transition Between Hot/Cold Chamber: 10 s Temperature Consistency: ±1 K Dimensions and Additional Data: External Dimensions: Height 1990 mm Width (without and with pivoting arm): without approx. 1820 mm / with approx. 1915 mm Depth (without and with test chamber door): without approx. 900 mm / with approx. 1155 mm Basket (Test Chamber) Dimensions: Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Maximum Test Chamber Load: 20 kg Maximum Floor Load Inside Test Chamber: 20 kg Ksdpek E Htyofx Ab Iolt Cooling Water Pressure: min. 2 ... max. 6 bar Maximum Pre-Fuse: 35 A (32 A CEE plug) Sound Pressure Level, 1 m in front of unit: approx. 65 dB(A) Electrical Connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated Current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of Delivery: (See picture) (Subject to changes and errors in the technical data!) For further questions, we are happy to assist you by phone.

Koşul: mükemmel (kullanılmış), Weiss Temperature Test Chamber Model: WT3-600/70/5 Manufacturer: Weiss Umwelttechnik For sale is a high-quality Weiss WT3-600/70/5 temperature test chamber, designed for professional temperature testing in industrial, research, development, and quality assurance applications. Klodey Nibpepfx Ab Iot The unit features a modern S!MCON / 32 controller with touchscreen panel for convenient operation and programming of test sequences. This test chamber is water-cooled and engineered for demanding temperature tests in the range of -70 °C to +180 °C. Features: - S!MCON / 32 controller - Control unit with touchscreen - Adjustable leveling feet - Cable ports on both left and right sides - R1 port, nominal width 125 mm - L1 port, nominal width 50 mm - Test chamber illumination - Water-cooled design Technical specifications: - Temperature range: -70 °C to +180 °C - Test chamber volume: approx. 600 liters - Internal dimensions: approx. 800 x 950 x 800 mm (W x H x D) Temperature performance data: - Temporal temperature deviation: ± 0.1 to ± 0.5 K - Spatial temperature deviation: ± 0.5 to ± 1.5 K - Heating rate: approx. 7.5 K/min - Cooling rate: approx. 7.5 K/min - Heat compensation: max. 2500 W Electrical data: - Power supply: 3/N/PE AC 400 V ±10% / 50 Hz - Rated current: approx. 23 A - Rated power: approx. 13 kW - Fuse protection: 16 A slow-blow Refrigerants: - R404A / R23 Dimensions: Including hinges and door lock: - approx. 1090 x 1995 x 1660 mm (W x H x D) Without hinges and door lock: - approx. 1000 x 1995 x 1660 mm (W x H x D) Weight: - approx. 620 kg Sound pressure level: - approx. 58 dB(A) Condition: - Used Scope of delivery: - As per images Viewing by appointment possible. Loading can be arranged. Sale without warranty. (Subject to change and errors excepted)

Koşul: mükemmel (kullanılmış), CTS Temperature Shock Test Chamber Type: TSS-70/32 Manufacturer: CTS Klima Temperatur Systeme Version: Air-cooled For sale is a CTS temperature shock test chamber for thermal cycling and shock testing in industry, research, and development. Technical Data: Test chamber volume: approx. 32 liters Max. test specimen weight: approx. 10 kg Temperature Ranges: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Performance Data: Heating rate: approx. 6 K/min Cooling rate: approx. 6 K/min Thermal shock rate: up to approx. 100 K/min Transfer time: < 10 seconds Temperature deviation: ±1 K / ±2 K Electrical Data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.7 kW Rated current: approx. 15.4 A Protection: 16 A slow-blow Protection category: IP 22 Refrigerants: R404A: 2.3 kg R23: 0.90 kg Pressure Data: Operating overpressure: 25 bar Test pressure: 27.5 bar Dimensions: Klsdjy I Ntcopfx Ab Iot approx. 1325 x 2012 x 1820–2020 mm (W x D x H) Weight: approx. 650 kg Additional Data: Sound pressure level: < 58 dB(A) Compressed air connection: 1/4" male thread Equipment: Two-chamber system (hot/cold chamber) Digital CTS control Display / control panel Program operation Operating hours counter Observation window Internal lighting Temperature limiter Specimen protection RS232 interface Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram available Piping diagram available Quick reference guide available Safety data sheets available Note: The table shown in the photos is not included in the sale. Condition: Used Visual condition as shown in photos Scope of delivery as depicted Inspection possible by appointment. Loading can be organized. Commercial sale. Sold without warranty. (Specifications subject to change and errors excepted)

Koşul: mükemmel (kullanılmış), Vötsch Temperature Shock Test Chamber Model: VT 7012 S2 Manufacturer: Vötsch Industrietechnik GmbH Design: water-cooled For sale is a Vötsch temperature shock test chamber in two-chamber design for rapid temperature change tests. Suitable for industrial, automotive, aerospace as well as research and development applications. Temperature ranges: Hot chamber: +50 °C to +220 °C Cold chamber: -80 °C to +70 °C Temperature data: Temporal temperature deviation: ±1 K Spatial temperature deviation: ±2 K Heating rate hot chamber: approx. 11 K/min Heating rate cold chamber: approx. 2 K/min Cooling rate: approx. 3 K/min Test chamber: Volume: approx. 125 liters Internal dimensions: approx. 470 x 650 x 410 mm Cable port: Ø 67 mm Electrical data: Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 10 kW Rated current: approx. 25 A Refrigerant: R404A: 2.9 kg R23: 1.27 kg Pressure data: Low pressure max.: 22.5 bar High pressure max.: 25 bar Dimensions: approx. 930 x 2115 x 1970 mm Weight: approx. 1000 kg Equipment/features: Two-chamber shock test system Digital control Programmable operation Observation window Cable port Condition: Used Control system overhauled and newly wired Operating panel replaced Kledpfxey Iyuwe Ab Ijt Spindle and spindle motor replaced Plate heat exchanger insulated Scope of delivery: Vötsch VT 7012 S2 temperature shock test chamber Accessories as shown in the pictures Inspection possible by appointment. Loading can be organized. Sale without warranty. (Subject to changes)

Koşul: mükemmel (kullanılmış), LDS / CTS Vibration Test System Model: V895-440 HBT SP + CTS CV-70/1700-10 Manufacturer: Ling Dynamic Systems (LDS) / CTS For sale is a complete electrodynamic vibration testing system consisting of an LDS shaker, SPA56K power amplifier, K2+ control system, and CTS climatic chamber. Ideally suited for combined vibration and climate testing in the industrial, automotive, aerospace, as well as research and development sectors. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (UK) Model: V895-440 HBT SP Air-cooled vibrator Armature diameter: 440 mm Frequency range: DC – 2100 Hz Sine force: 55.6 kN Shock force: 166.8 kN Max. acceleration: 981 m/s² Kljdpfxey Iwp Sj Ab Ist Max. velocity: 1.6 m/s Displacement: 63.5 mm pk-pk Payload: approx. 700 kg Air-cushioned and vibration-isolated system. Compressed air supply required. Power Amplifier Manufacturer: LDS Model: SPA56K v3 V890/5 Class-D high performance switching amplifier Air-cooled industrial design Input voltage: 415 V Max. power requirement: 86.9 kVA Efficiency: > 90 % Controller display: Amplifier: SPA8/16K_v3 Vibrator: V830_185 Control System IMV K2+ Vibration Control System Multi-channel control system incl. Dell Precision PC system, monitor, keyboard, and mouse CTS Climatic Chamber Manufacturer: CTS Clima Temperatur Systeme Model: CV-70/1700-10 Year of manufacture: 03/2020 Temperature range: -70 °C to +180 °C Humidity range: 10% to 95% RH Volume: approx. 1700 liters Rated voltage: 400 V / 3/N / 50 Hz Power: 21.9 kW Rated current: 37.1 A Refrigerants: R452A: 9.5 kg R23: 3.7 kg Features Combined climate and vibration testing Slip table / mounting table included Vibration-isolated installation Programmable operation possible Slip table 760 mm x 850 mm Threaded insert spacing 100 mm Activated Licenses: Excitation types Sine, resonance dwell, limit control, amplitude dwell Multi sweep sine, soft-clipping noise, sine-on-random PSD limit control, shock Extensions Scheduler, multi-language, launcher, system monitor Weight Shaker: approx. 3.0 – 3.2 t Total weight: approx. 6,000 – 7,000 kg Condition Used system System was last in operation System starts / control active Inspection under power possible Scope of delivery LDS V895-440 HBT SP shaker LDS SPA56K amplifier IMV K2+ system Complete PC system CTS climatic chamber Accessories as shown in images Loading possible. Sale without warranty. Subject to prior sale and changes.

Koşul: mükemmel (kullanılmış), CTS Climate Test Chamber C-70/1000-S Device Data Manufacturer: CTS GmbH Model: C-70/1000-S Year of manufacture: 08/2011 Serial number: 113054 Design: Climate test chamber / Environmental simulation chamber Cooling: Water-cooled Description Used CTS climate test chamber for precise temperature and climate testing. Suitable for material, component, and reliability testing. Applications in industry, research, development, and quality assurance. Temperature and Climate Specifications Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min heating Temperature change rate: approx. 2.5 K/min cooling Humidity range: 10% to 98% RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Refrigeration System Refrigerants: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment CTS control panel with LCD display Program operation Digital setpoint/actual value display Observation window in door Stainless steel test chamber Specimen protection / temperature limiter Internal lighting Side cable ports Cable entry ports approx. 50 mm and approx. 125 mm RS232 interface as per documentation Digital outputs for specimen control Mobile design on castors Dimensions Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Entry dimension (W x D x H): approx. 2350 x 1290 x 2000 mm Weight Test chamber: approx. 1000 kg Recooler: approx. 120 kg Documentation Declaration of Conformity Test certificates Operating manual Monitoring messages and digital channels Installation plan Quick guide Humidity diagram Scope of Delivery CTS Climate Test Chamber C-70/1000-S Documentation as available Scope of delivery as shown Pre-shipment Service (optional) Functional test Refrigerant service Leakage test Trial run with protocol Condition Used. Condition as seen in images. Klodpfsy Iam Hsx Ab Iet Note Used equipment, sale without warranty. Inspection by appointment possible. Loading and transport can be arranged on request. Subject to prior sale and technical changes. If you have any questions, please contact us.

Koşul: mükemmel (kullanılmış), RS-Simulatoren Thermal Shock Chamber ST2K 1000 / 55 The system was regularly serviced and maintained by the manufacturer until decommissioning. Device Data Manufacturer: RS-Simulatoren Model: ST2K 1000 / 55 Design: Thermal shock chamber Cooling: water-cooled Description Used thermal shock chamber for standard-compliant thermal shock testing. Suitable for material, component, and reliability testing. Ideal for use in industry, automotive, research, and quality assurance. System Description - Two separate temperature chambers (hot / cold) - Automatic horizontal transfer of the test basket - Rapid cycle operation for thermal shock tests Temperature Ranges Hot chamber: +40 °C to +180 °C Cold chamber: -70 °C to +100 °C Temporal deviation: ±0.8 K Test Chamber - Volume: approx. 580 liters - Internal dimensions (W x H x D): approx. 1070 x 680 x 800 mm - Max. load: approx. 150 kg Power Supply 400 V / 3~ / N / PE / 50 Hz Power: max. 33 kVA Current consumption: max. 65 A Media Connections - Cooling water: G 1", approx. 3 bar (max. 10 bar) - Cooling water requirement: max. 3.2 m³/h - Cooling water return: pressureless - Compressed air: NW 7.2, 4–10.5 bar Dimensions External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight Approx. 2,800 kg Features - Horizontal basket movement - C-rails in the test chamber - Large test basket (>1000 mm) - Observation window - Interior lighting - SE-604 control unit - Program operation and data recording - RS232 interface Refrigeration System - Refrigerants: R449A / R23 - R449A: approx. 8.0 kg - R23: approx. 2.5 kg Operating Data Operating hours: approx. 4,500 h Sound level: approx. 67 dB(A) Ambient Conditions - Temperature: +12 °C to +30 °C - Humidity: 25% to 75% rH Kedpfx Aey H Igfeb Ijlt Scope of Delivery - RS-Simulatoren thermal shock chamber ST2K 1000 / 55 - Scope of delivery as shown Optional pre-shipment service - Functional test - Refrigerant service - Leak test - Test run with report Condition Used. Condition see photos. Note Used equipment, sold without warranty. Inspection possible by arrangement. Loading and transport can be organized on request. Subject to prior sale and specification changes. If you have any questions, please feel free to contact us.

Koşul: mükemmel (kullanılmış), Binder Climate Test Chamber MKFT 720 E3.2 Device Data Manufacturer: Binder Model: MKFT 720 E3.2 Year of manufacture: 2017 Article number: 9020-0288 Design: Climate test chamber Cooling: air-cooled Description Used climate change test chamber from Binder. Suitable for temperature, climate, material and aging tests, as well as stress tests. Intended for use in industry, research, development and quality assurance. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Interior volume: approx. 734 liters Max. total load: 160 kg Max. load per shelf: 40 kg Dimensions External (W x H x D): 1615 x 2005 x 1230 mm Internal (W x H x D): 1200 x 1020 x 600 mm Electrical Data 400 V / 3N~ / 50 Hz Power: 13.0 kW Current: 22.5 A Protection rating: IP 20 Refrigeration System Refrigerant: R404A / R23 Stage 1: 4.00 kg Stage 2: 0.87 kg Two-stage refrigeration system Max. operating pressure: 29 bar Performance Data Temperature Temporal temperature deviation: 0.1 to 0.5 K Spatial temperature deviation: 0.3 to 2.0 K Heating rate: approx. 4.8 K/min Cooling rate: approx. 4.0 K/min Heat compensation: approx. 5000 W Climate Performance Data Climate range: +10 °C to +95 °C Humidity range: 10% to 98% RH Temperature deviation: 0.1 to 1.0 K Heat compensation: approx. 800 W Equipment Touch control panel Program mode and constant mode Observation window Stainless steel test chamber Interior lighting Cable port Mobile on castors Rugged industrial construction Weight Approx. 635 kg Scope of Delivery Binder Climate Test Chamber MKFT 720 E3.2 Scope of delivery as shown Service before delivery (optional) Functional check Refrigeration service Leak test Test run with report Condition Used. Condition as shown in photos. Kjdpey H H Smjfx Ab Ijlt Note Used equipment, sale without warranty. Inspection possible by appointment. Loading and transport can be arranged upon request. Subject to prior sale and modifications. If you have any questions, feel free to contact us.

Koşul: mükemmel (kullanılmış), CTS Climate Test Chamber C-70/600 Device Data Manufacturer: CTS GmbH Model: C-70/600 Version: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature and climatic testing. Intended for use in research, development, and quality assurance. Operating Condition Display: Manual operation / Stop. Temperature: 16.59 °C (actual) / 5.00 °C (setpoint). Humidity: 39.7% rH. Water reservoir: 11.0 l. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% rH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection rating: IP 22 Refrigeration System Refrigerants: R404A / R23 Cascade refrigeration system Low-temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Kodpfjy H H D Aox Ab Islt Equipment Observation window Stainless steel test chamber Digital setpoint/actual value display Test item protection / temperature limiter Water connection (deionized water) Condensate drain Tube lead-throughs RS232 interface Digital outputs Dimensions Interior: approx. 850 x 850 x 830 mm Exterior: approx. 1900 x 1115 x 1850 mm Weight Approx. 600 kg Scope of Delivery CTS Climate Test Chamber C-70/600 Documentation (where available) Pre-delivery service (optional): - Function test - Refrigerant service - Leak test - Test run with protocol Condition Used. Condition as shown in photos. Notice Used device, sale without warranty. Inspection possible by arrangement. Loading and transport can be organized on request. Subject to change and prior sale. If you have any questions, feel free to contact us.

Koşul: mükemmel (kullanılmış), CTS Climate Test Chamber CS-70/600-5/S Device Data Manufacturer: CTS GmbH Model: CS-70/600-5/S Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber by CTS. Suitable for temperature, climate, and stress screening tests. Designed for use in industry, research, and quality assurance. Operating Condition Display: Manual operation / Warning (bleed water bath). Operating Hours Total: 19,788 h Compressor Cooling: 8,699 h Compressor Pre-cooling: 11,432 h Circulation Pump: 2,905 h Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% rH Dew point range: -10 °C to +94 °C Test chamber volume: 600 litres Electrical Data 400 V / 3/N / 50 Hz Power: 18.4 kW Current: 30.6 A Protection rating: IP 22 Refrigeration System Refrigerants: R404A / R23 Pre-cooling stage: 5.0 kg Cooling stage: 2.1 kg / 14.5 bar CO₂ equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800 Pressure Data PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber CTS touch/LCD control panel Programmable operation Test item protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath Automatic water replenishment possible Interfaces (RS232 / Ethernet) Integrated control cabinet Industrial design Feedthroughs 1x NW 50 2x NW 125 Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1120 x 1875 mm Kedey H Hmwepfx Ab Iolt Weight approx. 750 kg Scope of Delivery CTS Climate Test Chamber CS-70/600-5/S Documentation / Test certificates (if available) Pre-Delivery Service (optional) Function test Refrigerant service Leakage test Test run with protocol Condition Used. For visual condition please see pictures. Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized on request. Subject to prior sale and changes. If you have any questions, please feel free to contact us.

Koşul: mükemmel (kullanılmış), CTS Climate Test Chamber C-70/600 Device Data Manufacturer: CTS GmbH Model: C-70/600 Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber by CTS. Suitable for temperature and climate testing. For use in industry, research, and quality assurance. Kodpey H Hl Hofx Ab Islt Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection rating: IP 22 Refrigeration System Refrigerant: R404A / R23 Cascade refrigeration system Low temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber Digital set/actual value display Test object protection / temperature limiter Water connection (demineralised water) Condensate drain Cable ports RS232 interface Digital outputs Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1115 x 1850 mm Weight Approx. 600 kg Scope of Delivery CTS climate test chamber C-70/600 Documentation (if available) Pre-delivery service (optional) - Functional check - Refrigerant service - Leak test - Test run with report Condition Used. Visual condition as per photos. Note Used equipment, sold without warranty. Inspection by prior arrangement possible. Loading and transport can be organised on request. Subject to change and prior sale. If you have any questions, please feel free to contact us.

Koşul: mükemmel (kullanılmış), CTS Type: C-70/600 CTS Climate Test Chamber C-70/600 air-cooled version with observation window, specimen protection, and documentation For sale is a high-quality CTS climate test chamber type C-70/600 for precise temperature and climate testing in research, development, quality assurance, and industrial applications. Technical data: Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% r.h. Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Nominal power: 8.7 kW Nominal current: 14.8 A Protection class: IP 22 Refrigerant: R404A (precooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Equipment: Observation window in the door Stainless steel test chamber CTS control panel with digital set/actual value display Specimen protection / temperature limiter Water connection / deionized water feed Test chamber and condensate drains Sidewall cable ports in the test chamber RS232 interface as per documentation Digital outputs for specimen control Test chamber dimensions according to documentation: approx. 850 x 850 x 830 mm External dimensions according to documentation: approx. 1900 x 1115 x 1850 mm Weight according to documentation: approx. 600 kg Scope of delivery: CTS climate test chamber C-70/600 Klsdpfxoy Hkazo Ab Ijt including available documentation / operating instructions Scope of delivery as shown in the pictures For your safety as a buyer: The device can be inspected by appointment. Forklift loading can be arranged. For your safety as a buyer, please note the following information! The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (We reserve the right to make changes and corrections to technical data and information!) We are happy to answer any further questions for you by phone.

Koşul: mükemmel (kullanılmış), Weiss WT-1000/70/5 Temperature Test Chamber For sale is a used temperature test chamber from the manufacturer Weiss, model WT-1000/70/5. This unit is designed for precise temperature testing in industrial and laboratory environments and is suitable for applications in research, development, and quality assurance. The test chamber enables reproducible temperature cycles across an extended temperature range, making it especially suitable for material testing, aging tests, and load tests under defined temperature conditions. Technical Data Manufacturer: Weiss Model: WT-1000/70/5 Device type: Temperature test chamber Temperature range: -70 °C to +180 °C Temperature deviation (temporal, usable space center): ± 0.1 to ± 0.5 K Temperature uniformity (spatial): ± 0.5 to ± 2 K Heating rate: 6.1 K/min Cooling rate: 6 K/min Test chamber volume: approx. 1000 liters Test chamber dimensions (approx.): 950 x 1100 x 950 mm (H x W x D) External dimensions (approx.): 2000 x 1415 x 2105 mm (H x W x D) Permissible total load chamber floor: 150 kg Permissible load per shelf: 50 kg Rated voltage: 3/N/PE AC 400 V ± 10% / 50 Hz Rated current: 38 A Rated power: 26 kW Refrigerants: R404 / R23 Weight: approx. 955 kg Features Klodpfx Aey D Nyuob Ijt - Water-cooled system - Spacious testing chamber - High temperature change rate - Industrial-grade construction Condition Used, with age- and usage-related signs of wear. Service / Inspection To ensure quality, the following services are performed on the listed equipment: - Functional check and replacement of necessary components - Refilling with legally compliant refrigerant if required - Leak test with certificate - Documented trial run after successful inspection Scope of Delivery - Weiss WT-1000/70/5 temperature test chamber - Accessories as shown in the images Notes - Connection via 400 V three-phase power is required - Due to size and weight, shipping by freight carrier is necessary - Sale from commercial stock - All specifications without guarantee - Subject to prior sale - For further information, we are happy to assist you.

Koşul: mükemmel (kullanılmış), Memmert Model: CTC 256 Memmert Climate Test Chamber CTC 256 Temperature & Humidity Test Chamber Industrial Quality For sale is a high-quality climate test chamber / temperature test chamber manufactured by Memmert, model CTC 256. The unit comes from professional use and is ideally suited for laboratories, industry, research & development, as well as quality assurance. The Memmert CTC 256 is designed for precise simulation of temperature and climate conditions. It supports both cooling and heating processes and, in this version, also features humidity control. This makes the unit perfect for material testing, aging tests, climate stress testing, and long-term experiments under defined environmental conditions. Thanks to the integrated controller, complex test programs involving temperature and timed cycles can be set. The air circulation system ensures uniform temperature distribution throughout the interior. Available interfaces allow for documentation and external processing of measurement data. Equipment: - Temperature and climate test chamber (heating & cooling) - Humidity control - Electronic controller with programmability - Air circulation system for even temperature distribution - Internal protocol memory - USB and Ethernet interface - Additional 230 V socket - Cable entry (side) - Water tank system (humidification/condensate) - Mobile on casters Technical Data: Manufacturer: Memmert Model: CTC 256 Device type: Climate test chamber Temperature range: approx. -42 °C to +190 °C Interior volume: approx. 256 liters Operating voltage: 3N~ 400 V / 50 Hz Klodpfsy D Ni Ajx Ab Ijt Current consumption: approx. 10.6 A Power consumption: approx. 7000 W Protection class: IP20 External dimensions (approx.): 898 x 1730 x 1100 mm (W x H x D) Internal dimensions (approx.): 640 x 670 x 597 mm (W x H x D) Weight: approx. 300–350 kg Condition: used Scope of delivery (see pictures): - Memmert CTC 256 climate test chamber - Grids/shelves - Water canister - Documentation Delivery as shown (Subject to changes and errors in technical data and specifications!) For further questions, feel free to contact us by phone.

Koşul: mükemmel (kullanılmış), Type: UF 450plus Air circulation: forced convection Temperature Temperature range: +20 °C to +300 °C Working range: at least +10 °C above ambient temperature Setting accuracy: up to 99.9 °C: 0.1 °C from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-wire) Interior and Capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Maximum number of shelves: 8 Load per shelf: 30 kg Maximum total load: 300 kg Chamber: stainless steel, all-around heating External Dimensions and Weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Electrical Data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and Regulation Control: ControlCOCKPIT TwinDISPLAY Controller: digital PID microprocessor Timer: 1 minute to 99 days Kjdpfxjyzzm Io Ab Ielt Functions: SetpointWAIT, HeatBALANCE, calibration at 3 temperature points Adjustable parameters: temperature, fan speed, exhaust flap, time programs Ventilation Recirculated air: adjustable in 10% increments Fresh air: electronically adjustable Exhaust: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Temperature limiter (TB), protection class 1 Temperature monitor / limiter (TWW/TWB) selectable ASF system for over- and undertemperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Back side with 2 feedthroughs each approx. 12 cm diameter Condition: used Scope of delivery: (see picture) (Specifications and possible errors in the technical data, details are subject to change!) We are happy to answer any further questions by phone. For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or obtaining information directly from the manufacturer.

Koşul: mükemmel (kullanılmış), Burada size bir Heraeus Vötsch sıcaklık test odası sunuyoruz. Heraeus Vötsch sıcaklık test kabini, su soğutmalı Sıcaklık aralığı -70 ° C ila + 180 ° C Zamanla sıcaklık sapması ± 0,1 ila ± 0,5 K Mekansal olarak sıcaklık sapması ± 0,5 ila ± 2,0 K Sıcaklık değişim hızı, soğutma 7,5 K / dak Hız sıcaklık değişimi, ısıtma 7,5 K/dk ısı kompanzasyonu + 20°C 3000 W ısı kompanzasyonu -20°C 3000 W test odası boyutları: genişlik 580 mm derinlik 450 mm yükseklik 750 mm dış ölçüler: genişlik 870 mm derinlik 1280 mm yükseklik 1575 mm gözlem penceresi: genişlik 300 mm x yükseklik 540 mm test odası hacmi 190 Litre Nominal voltaj: 3 / N / PE AC, 400 V ± %10, 50Hz Nominal güç: 10,5 kW Nominal akım: 22 A Sigorta, yerinde: 32 A 1m mesafede yavaş ses seviyesi (serbest alan ölçümü) <69dB (A) yandan giriş 50 cm / 125 cm kabin su soğutmalıdır Soğutucu akışkan: R 404A ve R 23 Ağırlık yaklaşık 460 kg Tip: VTS 7018-5 alıcı aşağıdaki bilgiler güvenliktir! Sunulan haznelerimizde aşağıdaki hususlar önceden gerçekleştirilir: 1. İşlev kontrolü ve gerekli bileşenlerin değiştirilmesi 2. Yasal olarak uygun soğutucu ile yeni dolum 3. Başarılı bir kontrolden sonra hazneler, aşağıdakilerle izlenen bir test çalışmasına tabi tutulur. kalibre edilmiş cihazlar Durum: kullanılmış / kullanılmış Teslimat kapsamı: (Resme bakınız) (Teknik verilerdeki değişiklikler ve hatalar, detaylar saklıdır!) Telefonda daha fazla sorunuzu sizin için cevaplamaktan memnuniyet duyarız. Klodpohh H Hiefx Ab Iet [...]

Koşul: mükemmel (kullanılmış), Heraeus Vötsch Type: VTS 7018-5 Heraeus Vötsch Temperature Test Chamber, Water-cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature change rate cooling: 6.5 K/min Temperature change rate heating: 7.5 K/min Heat compensation: 4500 W Test chamber dimensions: width 580 mm, depth 450 mm, height 750 mm External dimensions: width 870 mm, depth 1280 mm, height 1575 mm Viewing window: width 300 mm x height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW; rated current: 21 A Fuse (on-site): 32 A slow-blow Sound level at 1m distance (free-field measurement): < 63 dB(A) Side port: 50 cm / 125 cm The chamber is water-cooled Refrigerants: R452A and R23 Weight approx. 460 kg Important safety information for buyers: The following measures are performed on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and data subject to change and errors!) Kjdpfx Absyu Rhgo Iolt We are happy to answer further questions for you by phone.

Koşul: mükemmel (kullanılmış), Here we offer you a Thermotron temperature chamber. Water-cooled Thermotron Temperature Chamber SE-1000-6-6 Internal dimensions (W x D x H): 1000 x 1000 x 980 mm Working volume: approx. 980 liters Temperature range: -70ºC to +180ºC Overall heating rate: approx. 4.1 K Overall cooling rate: approx. 1.2 K Heating rate (ºC/min) from -65ºC to +71ºC: 6.8ºC Heating rate (ºC/min) from -65ºC to +180ºC: 5.6ºC Heating rate (ºC/min) from -40ºC to +85ºC: 6.5ºC Cooling rate (ºC/min) from +85ºC to -40ºC: 4.7ºC Cooling rate (ºC/min) from +71ºC to -65ºC: 3.7ºC Cooling rate (ºC/min) from +180ºC to -65ºC: 4.3ºC External dimensions (W x D x H): 1250 x 1900 x 2200 mm Electrical requirements: 400V/5P/N/PE 35 A Refrigerants: R508B and R404A Approx. weight: 900 kg Type: Thermotron SE-1000-6-6 Important safety information for buyers! The following measures are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate Kedjixtitspfx Ab Islt 4. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Technical specifications and details are subject to change and errors!) We will gladly answer further questions by phone.

Koşul: mükemmel (kullanılmış), CTS Type: CW-60/7 Walk-in Climatic Test Chamber CTS Walk-in Climatic Chamber 7m³ Temperature & Humidity Testing -60 – 120°C Description: For sale is a professional CTS climatic test chamber, type CW-60/7. This is a professional walk-in climate and temperature test chamber designed for industrial applications, research, and quality assurance. The unit simulates extreme environmental conditions to test components, modules, or complete systems under realistic stress scenarios. The climatic chamber enables: Temperature testing from –60 °C to +120 °C Climate tests with 10–95% relative humidity Programmable temperature and humidity cycles Endurance tests Trend recording RS232 / RS485 interfaces Manual or automatic program operation Particularly suitable for: Electronics testing Solar modules (previously used for this) Automotive components Materials testing Endurance testing The air circulation system ensures a highly uniform temperature distribution throughout the entire 7 m³ test chamber. Technical Data: Temperature Range: –60 °C to +120 °C Rate of change: approx. 2 K/min Humidity: 10–95% r.h. Dew point range: +5 °C to +89 °C Refrigerants: R404A/R23 Max. permissible pressure: 25 bar III.6 Short manual Size Test volume: 7 m³ Walk-in version (accessible) Internal dimensions: approx. 1,400 x 2,200 x 2,250 mm (W x D x H) External dimensions: approx. 4,990 x 1,851 x 2,500 mm (L x W x H) Power / Connection 400 V, 3/N, 50 Hz Rated power: 43.1 kW Rated current: 67.5 A Protection class: IP 54 Weight: 4,000 kg Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) For further questions, please do not hesitate to contact us by phone. Kljdpfx Aoylxaxjb Iet

Koşul: mükemmel (kullanılmış), CTS Type: CTS CW+40/7/7 Walk-in Climate Chamber CTS Walk-in Climate Chamber 7m³ Temperature & Humidity Testing 40–90°C Description: For sale is a walk-in climatic temperature test cell, model CTS CW+40/7/7, industrial grade. This system is used to simulate defined temperature and climatic conditions for testing materials, assemblies, and technical systems under realistic environmental conditions. Both temperature and humidity can be precisely controlled, with the option to run constant or programmed test cycles. High air circulation ensures uniform climate distribution throughout the test chamber. The walk-in design enables testing of large components or complete systems. Technical Data: Manufacturer: CTS – Clima Temperatur Systeme Type: CW+40/7/7 Serial number: 113011 Year of manufacture: 06 / 2011 Version: Walk-in climatic test chamber Test volume: 2 × 7 m³ Electrical Data: Power supply: 400 V / 3N / 50 Hz Nominal power: 29.6 kW Nominal current: 45.8 A Climatic Data: Temperature range: +40 °C to +90 °C Kjdpfx Abeylmame Ijlt Humidity range: 10% to 90% RH Dew point range: +30 °C to +87 °C Protection class: IP44 Internal dimensions: Width: 1400 mm, Depth: 1300 mm, Height: 2250 mm External dimensions (complete system): Width: 3511 mm, Depth: 2765 mm, Height: approx. 2515 mm (overall) Further technical data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heating elements Interior: Stainless steel Exterior: Coated steel sheet (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD display Interfaces: RS-232 / RS-485 Program and cycle operation possible Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2000 kg Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and information excepted!) We are happy to answer further questions by phone.

Koşul: mükemmel (kullanılmış), Weiss Type: EmissionEvent VOC/240 Weiss Technik EmissionEvent VOC/240 Industrial Emissions Test Chamber / VOC Test Chamber / Climatic Test Chamber Water-cooled For sale is a professional emissions test chamber Weiss Technik EmissionEvent VOC/240 (Year of Manufacture: 2018) Kjdpfx Absyhfg Ds Iolt from industrial laboratory and testing operations. The device is designed for performing standardized emissions tests under precisely controlled temperature, climate, and process conditions, and is suitable for continuous use in laboratory, industrial, and quality assurance environments. What does VOC mean / What does the device do? VOC = Volatile Organic Compounds The device measures and tests the outgassing (emissions) of materials under defined conditions. It analyzes which substances a material releases into the air. Typical applications: - Emissions testing of plastics, components, and materials - Automotive interior material tests (odor, pollutants) - Building products & furniture emissions - Packaging, textiles, adhesives, coatings - Quality control and compliance testing (e.g., ISO / VDA / DIN) The test system generates precisely defined temperature, humidity, and air conditions. Emissions are extracted from the test chamber by a carrier gas (e.g., nitrogen or air) and can subsequently be analyzed using detection equipment. Device Functions / Specifications: - Stainless steel emissions test chamber (hermetically sealed) - Temperature and climate control - Carrier gas system for emission measurements - Automatic process control with touch panel - Programmable operation / continuous operation possible - Sampling ports for VOC analysis - Industrial design (for laboratory and continuous operation) Data for Temperature Testing: - Temperature range: +20 to +130 °C - Temporal temperature deviation at center of useful space: ±0.1 to ±0.3 K - Spatial temperature uniformity: ±0.1 to ±0.5 K - Rate of temperature change (per IEC 60068-3-5): * Heating 0.4 K/min * Cooling 0.3 K/min Rate of temperature change (average, with increased heating/cooling capacity): * Heating up to +65 °C: 1.5 K/min * Cooling from +65 °C to +20 °C: 1.3 K/min Data for Climate Testing: - Temperature range: +20 to +130 °C - Dew point range: +5 to +60 °C - Humidity range: 5 to 95 % RH - Temporal temperature deviation: 0.1 to 0.3 K - Temporal humidity deviation: -3 to +3 % RH Dimensions EmissionEvent VOC/240 External dimensions (unit): Width: approx. 1350 mm, Depth: approx. 2500 mm, Height: approx. 1985 (2190) mm Internal dimensions (test chamber): Emission test chamber: 200 liters Gross chamber volume: 240 liters Net chamber volume: 208 liters Max. test load: 80 kg Internal dimensions VOC/240: Width: approx. 600 mm, Depth: approx. 560 mm, Height: approx. 600 mm Electrical: Voltage: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 12.1 kW Rated current: 30 A Protection class: IP54 Refrigerant: R134a – 2.5 kg Weight: approx. 1080 kg Important information for your security as a buyer! The following steps are always performed on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) Please feel free to contact us by phone for any further questions.