İkinci El Fabbri Odunla Çalışan Sıcak Hava Jeneratörleri. Yeni̇ Satın Al (21.943)

Durum: ikinci el, Üretim yılı: 2007, Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 200 kg, REA Jumbo 115 Jumbo 200, mobile hot air generator (230 V) with separate flue gas duct, mounted oil burner RG 4, prefilter for heating oil, radial fan, and plug-ready thermostat preparation. Prjdpfx Ajyq Ricefqjb Year of manufacture: 2007 - Rated heat load: 115 kW - Air flow rate: 9000 m³/h - Connection: 230 V - Weight: 200 kg Technical highlights of this series: - Burner hood with oil drip pan - Outlet opening Ø 600 mm - Pre-equipped for recirculation operation - Electrical distribution shock-protected - Robust construction with large wheels for easy transport, even on difficult terrain Accessories such as room thermostat, warm air hoses, tanks and tank heating, as well as flue gas pipes and rain cap are not included in this offer, but can be provided on request. Note: The buyer can arrange collection via freight forwarder. If you have no contact with forwarding agents, we are happy to help with suitable addresses or make enquiries on your behalf.

Durum: iyi (kullanılmış), Reznor UDSA Gas Warm Air Heater UDSA Gas Warm Air Heater – Top Efficiency at All Levels The most renowned device from REZNOR is the UDSA gas warm air heater, ensuring even air distribution in industrial halls. This easy-to-install recirculation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from outside (standard) or from the installation area. The UDSA warm air heater from REZNOR ensures uniform air distribution throughout the heated hall. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, delivering an efficiency rate of over 92%. UDSA: compact, revolutionary, and forward-thinking. This generation of units allows you to economically heat halls directly – with decentralized, modulating gas warm air heaters, without the need for central heating. REZNOR UDSA Gas Warm Air Heater. Advantages: - Efficiency greater than 92% - Suitable for vertical mounting - Low NOx emissions - Innovative combustion concept - Quiet operation - CE system certification, models B and C - Compact design for easy installation - Even heat distribution - Standard vertical and horizontal louvres - Modulating heat output up to 50% - EC technology - ErP Ready These are direct-fired gas warm air units (WLE) with atmospheric multi-gas burners supported by a fan. Installation and connection to gas and exhaust systems must be carried out by a certified installation company only. The gas warm air units (WLE) are suitable for: - Operation with natural gas or LPG - Recirculation mode - Intake temperatures below 5°C with stainless steel heat exchanger* - Single-stage or two-stage* heating operation, regulated by room thermostat and heating control switch - Ventilation° regulated by ECOtronic TN-L° with day-night-week program - Roof flue exhaust, version B or C° - Wall flue exhaust, version C° Gas Warm Air Unit Type: UDSA025-3 Appliance Class: B22P-C12-C32-C52-C62 Designation: DE Gas Category: I2ELL Type of Gas: G20 Natural Gas Supply Pressure: 20 mbar Nozzle Pressure: 8.20 mbar Max. Rated Thermal Input (Hs) QN: 30.08 kW Max. Rated Thermal Input (Hi) QN: 27.75 kW Max. Rated Heat Output: 25.53 kW Min. Rated Heat Output: Supply Voltage: 230V 1N, 50Hz Air Volume Flow: 2,385 m³/h Protection class: IP20 More new and used items available in our shop! International shipping costs on request! Psdsx Ihg Ijpfx Afqjrb

Durum: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, giriş voltajı: 400 V, giriş frekansı: 50 Hz, giriş akımı türü: trifaze, toplam uzunluk: 950 mm, toplam genişlik: 815 mm, toplam yükseklik: 2.060 mm, Donanım: CE işareti, dokümantasyon / kılavuz, WSS B 864 Comfort Yükleme Arkası Fırını Üstten hava sirkülasyonlu fırın, 8 adet 60x40 cm boyutunda tepsi için Duman ve buhar yoğunlaşmasını önleyen davlumbaz Hareketli fırın DGUV V3 Elektrik Güvenlik Testi Prsdpfx Afszpg Nbjqjb Bağlantı: 400V, 32A-CEE fiş Ölçüler: 815 x 950 x 2060 mm (Genişlik x Derinlik x Yükseklik) Temizlenmiş, kullanılmış fırın 3 ay garanti Geniş sergimizi ziyaret edin!

Durum: ikinci el, Bu ilan Jun-Air OF302 içindir Uygulama Yağsız kompresör 25 litrelik basınçlı kabın çerçeveler üzerine montajı 5 mikron otomatik boşaltmalı su filtre regülatörü dahil Birkaç farklı noktadan basınçlı hava çıkışı imkanı Psdpfx Afoxzg Rveqerb Ayarlanabilir kauçuk takozlar Esnek kullanım olanakları Mevcut sistemlerin sonradan donatımı için de uygun Yatay montaj imkanı OEM uygulamaları için ideal 2 frekanslı tahrik motoru Teknik Veriler Emiş kapasitesi - 108 l/dak Basma performansı - 8 barda 38 l/dak Ses seviyesi - 65 dB(A) Kompresör başına silindir - 2 Basınçlı kap hacmi - 25 l İzin verilen ortam sıcaklığı - +1 °C ila +40 °C Besleme gerilimi - 230 V, 50 Hz Motor gücü - 0,44 kW Akım tüketimi - 4,1 A Termal koruma - Entegre Çalışma süresi - %100 Ağırlık - 28 kg Boyutlar (UxGxY) - 380 x 380 x 610 mm

Durum: ikinci el, Vidalı kompresör WORTHINGTON - CREYSSENSAC Tip Rollair 40 -- RLR 40BM6 Fabrika No: 6240330200 Üretim Yılı: 2003 Hacim akışı: 4,6 m3/dak. Basınç: 10 bar Ana motor gücü: 30 kW Şebeke bağlantısı: 400 Volt, 50 Hz Bağlantı dişi: 1 1/2 inç - 36.022 okunan çalışma saati (kompresör çalışma süresi) - 19.257 okunan yük altında geçen saat - Ses izolasyonlu Yer ihtiyacı (U x G x Y): 1850 x 1050 x 1760 mm Podpfx Afjfmim Usqjrb Ağırlık: 910 kg İyi durumda

Durum: ikinci el, Bu ilan, Peak Scientific Corona Azot Jeneratörü 1010 ve Corona Hava Kompresörüyle birlikte satılmaktadır. Ünite tam çalışır durumda olup, hemen teslimata hazırdır. Sistem Detayları: Psdpfxjxwc Iis Afqsrb Peak Scientific Corona Azot Jeneratörü 1010 ve Corona Hava Kompresörü, yüksek saflıkta azot gerektiren laboratuvarlar için özel olarak tasarlanmıştır ve özellikle kromatografi gibi uygulamalar için idealdir. Corona 1010, Thermo Scientific Corona Veo Yüklü Aerosol Dedektörü için mükemmel uyumluluk sağlar; ayrıca LC, HPLC ve UHPLC uygulamalarına da uygundur ve 5 L/dak'ya kadar azot akışı (80 psi basınca kadar) sağlar. Temel Özellikler: Maksimum Gaz Akışı: 5 L/dak Maksimum Çıkış Basıncı: 80 psi (5,5 bar) Maksimum Saflık:

Üretim yılı: 1990, durum: yenilenmiş (kullanılmış), Yenileme yılı: 2010 Çıkış kVa: 1375 Volt: 6300 V Prodpfxeini Hwe Afqeb Toplam ağırlık: 74000 kg Diğer bilgiler: 1,16 MW Dizel Jeneratör, Tamamen yenilenmiş

Durum: ikinci el, elektrikli ısıtma ısıtma, iki bölgede ayrı ayrı ayarlanabilir kademesiz hız ayarı Prsdpfx Afezxdn Toqeb iz genişliği 600 mm elektromekanik kaldırma sistemine sahip kapak buhar enjeksiyonu için uygundur (ısıtma, ürün verimi) 180 kW / 275 A ek bir giriş ve çıkış bandı ile "CIP" temizleme sistemine uygun dış boyutlar (U x G x Y): ± 9.500 x 1.900 x 3.700 mm

Durum: yeni, Üretim yılı: 2026, makine/araç numarası: 2026, Fonksiyonellik: tamamen fonksiyonel, YENİ YENİ Unox Bakertop X 10 Dijital ID Yükleme Fırını YENİ YENİ 10 tepsi için konveksiyonlu fırın, 600 x 400 Unox Akıllı Performans Fırını Dokunmatik panel ile 1000+ program Çekirdek sıcaklık probu USB bağlantısı YAPAY ZEKA'lı üst model Sadece bizde DGUV V3 testli Bağlantı: 400V, 32A-CEE fiş Su girişi 3/4 inç, su çıkışı DN 40 Ölçüler: 860 x 1018 x 1219 mm, GxDxY Fırın YENİ & SAB testli 12 ay garanti + yedek parça servisi Opsiyonlar: Pure su filtresi Fırın tepsileri Lievox mayalama dolabı Ethernet bağlantısı DDC.App Buhar kondansatörlü davlumbaz Spray & Rinse temizleyici Servis paketi Alt stand Bakım sözleşmesi Teslimat servisi Kullanım ve devreye alma Predpfx Aeyaf Dmjfqob Büyük showroomumuzu ziyaret edin!

Durum: yeni gibi (sergi parçası), PFAFF 8320 - 111/101 uzun kollu versiyon masalı Prjdpfx Aoxa D Hrefqsb

Durum: ikinci el, KAESER vidalı kompresör Tipi BS 50 Fabrika No: 402852 Üretim yılı: 1990 Debi: 5 m³/dak. Çalışma basıncı: 7,5 bar Ana motor gücü: 30 kW Şebeke bağlantısı: 400 Volt, 50 Hz Bağlantı dişi: 1 1/2" inç - 1107,90 okunan çalışma saati - 749,00 okunan yükte çalışma saati - Ses yalıtımlı Podpfxjiyu Ifs Afqsrb Kapladığı alan (U x G x Y): 1600 x 1070 x 1350 mm Ağırlık: 900 kg Çok iyi durumda Yedek kompresör olarak kullanılmış, çok az çalışma saati vardır.

Durum: ikinci el, Bu ilan, MMM Stericell Sıcak Havalı Sterilizatör içindir. Prjdpfoxzg N Eox Afqeb Çalışır durumda ve kozmetik olarak iyi durumdadır. STERICELL® sıcak havalı sterilizatör, sağlık sektöründe hem paketlenmemiş hem de paketlenmiş tıbbi cihazların, üreticileri tarafından sıcak hava/ kuru ısı ile sterilizasyona uygun olarak tasarlanmış invaziv cihazlar dahil olmak üzere, sıcak hava / kuru ısı sterilizasyonu için kullanılmak üzere tasarlanmıştır.

Durum: mükemmel (kullanılmış), Heraeus Kurutma Fırını Sıcak Hava Sterilizatörü Burada bir Heraeus kurutma fırını sıcak hava sterilizatörü sunuyoruz. Üretici / Model: Heraeus SUT 6060 Özellikler: Sıcaklık aralığı: 250 °C Net hacim: 52 litre Ağırlık (boş): 53 kg İç ölçüler: Derinlik 339 mm, Genişlik 403 mm, Yükseklik 380 mm Dış ölçüler: Derinlik 535 mm, Genişlik 744 mm, Yükseklik 552 mm Nominal gerilim: 230V, nominal frekans: 50/60Hz, nominal akım: 7,1 A, nominal güç: 1,64 kW Prsdezdti Dspfx Afqsb Model: SUT 6060 Durum: kullanılmış / used Teslimat içeriği: (bakınız görsel) (Teknik verilerde değişiklik ve yanlışlık yapma hakkı saklıdır!) Diğer sorularınızı memnuniyetle telefonla cevaplayabiliriz.

Durum: mükemmel (kullanılmış), GEA FlowCook 8000/600. 8 metre pişirme uzunluğu, 600 mm genişlik. Mükemmel durumda, çok az kullanılmıştır. Elektrikli ısıtmalı. 283 KW. Pjdpfex Ili Hex Afqjrb

Durum: mükemmel (kullanılmış), Burada bir adet kamaralı sirkülasyonlu fırın sunuyoruz. Kullanım alanı ölçüleri: Yükseklik 900 mm / Genişlik 600 mm / Derinlik 600 mm 324 Litre Dış ölçüler: Yükseklik 1775 mm / Genişlik 900 mm / Derinlik 953 mm Tek kanatlı kapı Bağlantı gücü: 3x400V 50 Hz 10 kVA Isıtma gücü: 9 kW Nominal sıcaklık: 250°C Pedpfx Afezd Rxvsqerb Ağırlık: 300 kg Tip: KU 250/09-06-06 K1030852 Durum: ikinci el / kullanılmış Teslimat kapsamı: (bkz. resim) (Teknik verilerde değişiklikler ve hatalar olabilir, verilen bilgiler bağlayıcı değildir!) Daha fazla sorunuz için memnuniyetle telefonla yardımcı olabiliriz.

Durum: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm air furnace MARTINA 30 The MARTINA warm air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft operations. They are designed for heating larger usable spaces such as workshop halls and work areas of craft and industrial businesses. These warm air systems require no long heat-up phases and can heat joinery or carpentry shops, as well as other production facilities, within a short time. Solid wood and its by-products—such as remnants of solid wood panels, shavings, sawdust, pellets, or briquettes—serve as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37/EC (Italian Presidential Decree No. 459 of July 24, 1996) and the safety directive of Directive 89/392/EEC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the required emission limits of the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 29.8 kW - Thermal output (kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Warm air fan: 0.49 kW / 230 V Pjdovz Hqmspfx Afqsrb - Firebox negative pressure: 0.2-0.3 mbar - Required draught at nominal output: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (outlet): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached datasheet The two pipe outlets for outgoing warm air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per pipe outlet is permitted for air distribution.

Durum: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. These units are specifically designed for heating larger utility spaces such as factory halls and workspaces in trade and industrial operations. These warm air systems require no lengthy heat-up phase and quickly warm the workshop, joinery, carpentry, or other production spaces. Approved fuels include solid wood and its byproducts, e.g., offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA warm air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392EC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st Federal Immission Control Ordinance (BImSchV) regarding required emission values. - Automatic and continuous fan operation - Thermal output: 14.8 kW Prsdpfxjvz Hqts Afqeb - Thermal output Kcal: 12,720 - Fuel consumption: 4.5 kg/h - Air output: 2,400 m³/h - Firebox depth: 580 mm - Loading door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Required flue draft (nominal rating): 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Required installation space: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (suggested): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet nozzles: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet. The two warm air outlet connections are located at the rear of the furnace, towards the bottom section. A maximum of 20 meters of ducting per outlet is permitted for distributing the warm air.

Durum: mükemmel (kullanılmış), Üretim yılı: 2007, Kapalı fabrikadan doğrudan çift tamburlu spiral sıcak hava fırını, bu hamburger ve nuggetların ön pişirilmesi için kullanıldı. Bu makineler, çok çeşitli ürünlerin yüksek kapasitede pişirilmesi, ızgara yapılması ve buharda pişirilmesi için üretilmiştir, pişirme, ızgara veya buharda pişirme derecesi hava sıcaklığı, hava hızı, hava nemi ve ürünün sistemde kaldığı süreye göre belirlenir. Elektrikle ısıtılır. 96m x 600mm bant. Sözleşmenin başka bir fabrikaya taşındığı 2007'den 2016'ya kadar kullanıldı. Makine çok iyi durumda, ayrıca fabrikada kullanılan diğer her şeye sahibiz - şekillendiriciler, fritözler, kaplama makineleri, filtreler, spiral dondurucular, torbalama hatları vb. Lütfen fotoğrafların muhtemelen iki farklı fırını gösterdiğini, her ikisinin de çok benzer olduğunu unutmayın. Predpfx Aomrrwfefqeb

Durum: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and craft businesses. Podpfxjvz Hq Tj Afqerb They have been developed for heating larger utility areas such as workshops and production spaces in craft and industrial enterprises. These hot air systems require no long heat-up phases and are capable of heating a joinery or carpentry workshop or other production facilities in a very short time. The furnaces are designed to use solid wood and its by-products as fuel, e.g. solid wood board offcuts, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces conform to the EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, as well as the safety guideline of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the emission limits stipulated by the 1st BImSchV. - Automatic mode and continuous air operation - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m3/h - Combustion chamber depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draught requirement at nominal output: 0.18 mbar - Heated volume: approx. 1,600 m3 - Heated area: approx. 300 m2 - Space requirement: width 800 mm, depth 1,170 mm, height 2,200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85 – 90 % - Required chimney draught: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet collar: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for outgoing hot air are located at the lower rear of the furnace. A maximum pipe length of 20 metres per connector is permitted for air distribution.

Durum: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Warm air furnace MARTINA 55 The MARTINA warm air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft operations. They have been designed for heating large workspaces, such as workshops and work areas in craft and industrial businesses. These warm air systems require no lengthy heat-up phases and can quickly heat joiner’s or carpenter’s workshops as well as other production facilities. Solid wood and its byproducts—such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes—are used as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, and the safety requirements of Directive 89/392/EEC. All warm air furnaces in the MARTINA series—models 15, 30, 55, 85, 120, 180, 240, and 350—meet all emission standards required by both stages of the German 1st Federal Immission Control Ordinance (BImSchV). - Fully automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output (kcal): 43,000 Podjvz Hq Hspfx Afqsrb - Fuel consumption: 15 kg/h - Airflow: 4,900 m³/h - Combustion chamber depth: 650 mm - Insertion door: 370 x 350 mm - Warm air blower: 1.12 kW / 230 V - Fire chamber negative pressure: 0.2–0.3 mbar - Flue draft, rated output: 0.18 mbar - Heatable room volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Footprint: width 720 mm, depth 1000 mm, height 1900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (reference): 200 mm - Efficiency: 85–90% - Chimney draft pressure: 13 PA - Flue gas temperature: 290°C - Warm air outlet connectors: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet. The two warm air outlet duct connectors are located at the rear of the furnace near the bottom. A maximum of 20 meters of duct per air outlet is permitted for air distribution.

Durum: mükemmel (kullanılmış), Binder Tip: Binder CB 210 CO² / 9140-0013 Teknik Bilgiler Sıcaklık aralığı: Oda sıcaklığının 7 °C üzerinde 60 °C'ye kadar MB1 kontrol ünitesi ile sıcaklık ve CO2 konsantrasyonu kontrolü İç hacim: 210 litre Dış ölçüler (G x Y x D): 740 x 1069 x 715 mm İç ölçüler (G x Y x D): 560 x 750 x 500 mm Ağırlık: yaklaşık 121 kg Durum: kullanılmış Teslimat kapsamı: (Bkz. resim) (Teknik verilerde ve bilgilerde değişiklik ve hata yapma hakkı saklıdır!) Podpfjzgbtcox Afqjrb Ek sorularınızı memnuniyetle telefonla yanıtlayabiliriz.

Durum: yeni, Üretim yılı: 2025, Dimensions (LxWxH): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industries and craft businesses. They are designed for heating larger areas such as workshops and production halls in both craft and industrial settings. These hot air systems do not require long heat-up phases and can heat up a joinery, carpentry workshop, or other production facilities in a very short time. Fuel sources include solid wood and its by-products such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of 24 July 1996, and Safety Directive Annex 89/392 EC. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both emission levels required by the 1st BImSchV (German Federal Immission Control Ordinance). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air output: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2 - 0.3 mbar - Flue draught at rated output: 0.18 mbar - Heated volume: approx. 2,500 m³ Psdpfx Ajvz Hhxofqjrb - Heated area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue outlet diameter (fitting): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85-90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C - Hot air outlet connections: 2 x Ø220 mm - For further data, please see the attached data sheet The two pipe sockets for hot air discharge are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Durum: ikinci el, Pistonlu Kompresör KAESER Tipi EPC 630-250 Üretici No: 1802334 Üretim Yılı: 1992 6 bar'da debi: 440 litre/dak. Maksimum emiş kapasitesi: 630 litre/dak. Çıkış basıncı: 10 bar Pedpowypqrjfx Afqsrb Tank hacmi: 250 litre Motor gücü: 3 kW Şebeke bağlantısı: 400 Volt, 50 Hz (16 Amper fişli) - 2 silindir, yağlı - Basınç şalteri 10 bar'a ayarlı - 0 bar'dan 10 bar kapanma basıncına kadar çalışma süresi = 5 dakika Boyutlar U x G x Y: 750 x 700 x 1750 mm Ağırlık yaklaşık 150 kg İyi durumda

Durum: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Predovz Hqyspfx Afqsb Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft enterprises. They are specifically designed for heating large utility areas such as production halls and workspaces in both craft and industrial businesses. These hot air systems require no extended preheating phases and can heat joinery workshops, carpentry shops, and other production sites in a very short period of time. Fuel sources include solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and safety regulation Directive 89/392 CE. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1,400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space required: width 1,700 mm, depth 2,000 mm, height 2,550 mm - Weight: 1,400 kg - Flue gas pipe diameter (connection): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85–90% - Required chimney overpressure: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For more specifications, please refer to the attached datasheet The two pipe connections for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ductwork per outlet is permitted for air distribution. Greater lengths are optionally available in consultation with the manufacturer. Please contact us for further information.

Durum: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industries and craft enterprises. They have been developed to heat large utility spaces, such as workshops and work areas in craft and industrial businesses. These hot air systems require no long warm-up phases and can heat up the workshop or production facilities of carpentries and joineries in a very short time. Fuel sources include solid wood and by-products such as solid wood panel scraps, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline 89/392 EC. All MARTINA series hot air furnaces—models 15, 30, 55, 85, 120, 180, 240, and 350—meet both emission stages required under the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air output: 18,000 m³/h - Combustion chamber depth: 1200 mm - Feed door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox draft: 0.2–0.3 mbar - Required draft at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% Pjdpjvz Hqgjfx Afqsrb - Chimney draft: 16 Pa - Exhaust temperature: 290°C - Hot air outlet connectors: 2 x Ø 450 mm - For further technical data, please refer to the attached datasheet. The two duct connectors for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ducting is permitted per outlet for air distribution.