Kullanılmış Ostas Haddelenmiş Sac Makinesi satın al (30.131)

Koşul: yeni, Condition: new Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Lease rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity (mild steel): 8 mm Max. sheet thickness without pre-bending at D = 5x top roll: 8 mm Max. sheet thickness without pre-bending at D = 1.5x top roll: 6 mm Max. sheet thickness with pre-bending at D = 5x top roll: 6 mm Max. sheet thickness with pre-bending at D = 1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Fully hydraulic drive for top and bottom roll (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic adjustment of side rolls with electronic synchronization Hydraulic adjustment of bottom roll with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Kledpfx Asypbqnjqrjt The max. sheet thickness is 50% of the nominal capacity Cone length may be max. 30% or must exceed 60% of the roll length Hardened rolls are recommended

Koşul: yeni, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without prebending (mild steel): 12 mm Max. sheet thickness with prebending (mild steel): 8 mm Max. sheet thickness without prebending at D=5x top roll: 13 mm Max. sheet thickness without prebending at D=1.5x top roll: 10 mm Max. sheet thickness with prebending at D=5x top roll: 10 mm Max. sheet thickness with prebending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Lower roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of the top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Kodpjypbqhsfx Aqrelt Conical bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side plate supports NC Control IMPORTANT NOTES FOR CONICAL BENDING: The max. sheet thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Koşul: yeni, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness with pre-bending (mild steel): 10 mm Max. sheet thickness without pre-bending at D = 5x top roll: 13 mm Max. sheet thickness without pre-bending at D = 1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D = 5x top roll: 10 mm Max. sheet thickness with pre-bending at D = 1.5x top roll: 8 mm Top roll diameter: 240 mm Lower roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC control Fully hydraulic drive of top and lower rolls (from 30 mm bending capacity, all four rolls) via planetary gearbox Hydraulic adjustment of side rolls with electronic synchronisation Hydraulic adjustment of lower roll with mechanical synchronisation Ksdpfx Aqjypbqbsrjlt Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control console Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS WHEN CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Koşul: yeni, Condition: new Delivery time: approx. 2 weeks from order Country of origin: Italy Bending length: 2000 mm Max. bending capacity – mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x upper roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x upper roll: 7 mm Max. sheet thickness with pre-bending at D=5x upper rolls: 8 mm Max. sheet thickness with pre-bending at D=1.3x upper roll: 6.4 mm Upper roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Klodpfx Aqsypbp Rorjt Rolling speed: 8 m/min Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Numerical control: Siemens PGS-Classic with touchscreen Cone bending with electronic control and tilting of the lower roll Oil cooler Simultaneous rotation and roll movement Simultaneous roll and support movement Capability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for higher accuracy Infinitely variable speed for roll movement Infinitely variable speed for rotational movement Prepared for retrofit of supports (up to 5 axes) Prepared for retrofit of loading / unloading stations Prepared for retrofit of CNC controls Extra-large, double-hinged swinging bearing Electronic parallelism system for roll synchronization Hydraulic top roll lifting (for models starting from 205 mm upper roll diameter) Double linear guideway for lower roll movement Ultra-wide roll blocks "MCS" bearing system for the lower rolls (4 large bearings per shaft) Central lubrication system Pressure gauge for constant clamping roll monitoring Extra torque and special brake system Safety trip cable with emergency stop Equipped according to "CE" standards OPTION: CNC control Siemens PSG-Absolute with 15'' touchscreen (automatic calculation of sequences for simple and complex shapes)

Koşul: yeni, Condition: new Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €83,800 Kjdpfx Aoypbp Doqrslt Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity – mild steel: 15 mm Max. plate thickness without pre-bending at D=5x top roll: 15 mm Max. plate thickness without pre-bending at D=3x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 12 mm Max. plate thickness with pre-bending at D=5x top roll: 12 mm Max. plate thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Lower roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive for the top and bottom rolls (for bending capacities from 30 mm on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control console Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Top and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the nominal capacity The cone length may be a max. of 30% or must be more than 60% of the roll length Hardened rolls are recommended

Koşul: mükemmel (kullanılmış), Üretim yılı: 2004, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 1028, LEISTRITZ RT 400-CCA thread rolling machine Klsdpfx Aqoxytmhsrst Year of manufacture: 2004 / Control retrofit: 2019 Connection voltage: 3x400 V Frequency: 50 Hz Rated power: 65 kW Main circuit fuse: 125 A Operating pressure: Air: 6 bar, Oil: 270 bar Control voltage: 24 VDC Maximum workpiece length: 275 mm Minimum workpiece length: 125 mm Maximum roll set diameter: Tool Ø69.85: 215 mm, Tool Ø80: 210 mm Minimum roll set diameter: Tool Ø69.85: 176-178 mm, Tool Ø80: 176 mm Maximum rolling force: 40 t Required space: 3.4 m x 2.9 m x 2.2 m Weight: 4,900 kg Accessories: - Coolant filtration system - Second spindle pair (1x for tools Ø69.85 mm, 1x for tools Ø80 mm)

Koşul: ikinci el, Üretim yılı: 2010, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 84659300, Makine 3 çalışma ünitesinden oluşur: Kjdpfexn Ifujx Aqrolt 1. XSV Fırçalar (12 döner ve salınımlı fırça) 2. XSV Fırçalar (12 döner ve salınımlı fırça) 3. Silindir fırça Besleme bandı 1350 mm.

Koşul: yeni gibi (sergi parçası), Üretim yılı: 2026, Sac genişliği 2050 mm Sac kalınlığı 4,5 mm Sac kalınlığı - bükme 4,0 mm Silindir uzunluğu 2050 mm En küçük çap 210 mm Silindir çapı - üst 140 mm Ağırlık 1530 kg Boyutlar U-G-Y 3220 x 1200 x 900 mm 2026 model teşhir makinesi sadece yaklaşık 2 çalışma saati ile Durumu YENİ gibi Özel fiyat talep üzerine Donanım: - Sağlam elektro-mekanik dairesel bükme makinesi - 2x merkezi silindir elektrik motoru ile tahrik edilir (üst ve alt silindir) - Üst silindir elle yana açılabilir, katlanır yataklı - Konik bükme cihazı dahil - Serbest hareketli kumanda paneli - Alt silindir el çarkı ile manuel olarak ayarlanabilir - Asimetrik silindir düzeni - Kendi frenli ana motor - Emniyet tertibatı (emniyet ipi ve anahtar ünitesi ile) - CE işareti/uygunluk beyanı Klsdpfx Aoxaawgjqrjt Fiyata dahil olan özel donanımlar: - Sertleştirilmiş silindirler - Motorlu yan silindir ayarı - Motorlu yan silindir için dijital pozisyon göstergesi

Koşul: ikinci el, SAC RS/530 Kalınlık Planya Makinesi, işleme genişliği 530 mm Klsdpfjyzfvgjx Aqrjt

Koşul: mükemmel (kullanılmış), You are bidding on: a branded machine – folding bench, from a very reputable and well-known manufacturer – Schröder. Machine specifications: Schröder AKV folding bench Rail bends cleanly – test possible Angle display Bending length: slightly over 2 m Kodpfx Ajy Hbv Toqrelt Sheet thickness: 2 mm steel sheet; up to approx. 3 mm for aluminum, zinc, etc. Standard bending rail – optionally also segmented, see photo! Optional depth stop Matching guillotine shear available, e.g. Schröder 2m 3mm (see last photo), or Schechtl HT, Ras ... Current list price is approx. €20,000 net, without accessories Important! Optionally, you can find and purchase many machines and machine accessories such as various rails, depth stops – everything related to sheet metal and steel processing, such as folding machines, guillotine shears, drilling machines, slip rolls, slitting and profiling machines, accessory parts (beading tools, round rolls for gutter production, rear stops, etc.), as well as other hand tools and spare parts, all available in stock from many top manufacturers in our shop. I am always available to answer any questions. You will receive an invoice according to § 25a UStG (German VAT margin scheme). Free loading possible – weight approx. 1,550 kg Inspection and testing are possible and welcome by prior telephone appointment. Cash payment upon collection. Benefit from our experience and expertise – we are happy to advise you. Collection by the buyer (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Article number: Schröder AKV Folding Bench 260401

Koşul: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 1987, makine/araç numarası: 6197, Thalmann THAKO swing bending machine auction! EQUIPMENT Klsdpfsyzhc Aox Aqrjt Depth stop Automatic program with stored sheet metal profiles

Koşul: ikinci el, Maks. işleme uzunluğu: 3200 mm Maks. malzeme kalınlığı: 3 mm (demir sac için) Kjdpfjyrbqaex Aqrslt

Koşul: yeni, Üretim yılı: 2023, Durum: yeni Üretim yılı: 2023 Stok numarası: 8286 Teslimat süresi: hemen, ara satış mümkündür Menşei ülke: Türkiye Fiyat: 2990 € Stokta: 1 Bükme uzunluğu: 2040 mm Sac kalınlığı (420 N/mm²): 0,8 mm Maksimum bükme açısı: 70 ° Uzunluk: 2400 mm Genişlik: 750 mm Yükseklik: 850 mm Klodpfx Aqsynmxbsret Ağırlık: 290 kg Sürekli düz üst baskı Taşınabilir Manuel kesici aparat

Koşul: yeni, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Italy Price: €153,200 Leasing rate: €2,895.48 Working width: 1,350 mm Sheet thickness range – mild steel: 0.4 – 120 mm Abrasive belt dimensions: 1,370 x 2,200 mm Extraction capacity: 6,000 m³/h Extraction connection diameter: 150 mm Compressed air connection: 6 bar Length: 4,200 mm Width: 2,300 mm Height: 2,350 mm Weight: 4,200 kg WITH 2 WORKING UNITS: 1 X ABRASIVE BELT AND 1 X TOP ROTARY BRUSH UNIT * The machine is constructed from welded and normalized steel to ensure a stable and rigid structure. * Work table with motorized height adjustment enabled by synchronized movement of 4 screws. * Independent motors installed inside the frame, equipped with emergency brakes. * Dust extraction hoods located inside the machine. Control panel includes: * Automatic star-delta starter for main motors * Digital display for material thickness with decimal tolerance * Thickness adjustment with control (+/- 0.1) * Alarm control center for instant visualization of emergencies and/or damages. FEED GROUP * Table constructed from a solid metal frame with a ground, wear-resistant sliding surface. * Modified structures for vacuum systems available on request * The table raises and lowers from 780 mm up to a maximum height of 950 mm above ground. Table height adjustment motor power: 0.25 kW. * Maximum admissible workpiece weight on table: 140 kg. * Variable feed speed controlled by inverter from 0.4 to 4.5 m/min; option for 0.2–2.0 m/min or 0.6–6.0 m/min. * Conveyor belt made from special natural rubber, oil- and heat-resistant, with automatic centering system. * Side guides prevent lifting of the conveyor belt. * Rubberized pressure rollers, oil- and heat-resistant, positioned before and after each working group. * Automatic centering device for the conveyor belt * Automatically servo-cooled motor * Feed speed motor controlled on the main touchscreen 1ST DEBURRING GROUP WITH ABRASIVE BELT * Precision-ground and balanced contact roller with 180 mm diameter. Coating made from oil- and heat-resistant Nitrile rubber. Standard roller hardness: 55° Shore. Mounted on an eccentric shaft allowing control of working position and compensation for abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that enables automatic insertion of the group during operation, and immediate retraction of the abrasive belt from the working point in case of emergency and/or machine stop. It is possible to use abrasive belts and/or Scotch Brite belts. Ksdpfoynmw Rox Aqrolt * Pneumatic on-off switch. * Roller adjustment up/down “grit” stroke 10 mm * Variable speed motor 11 kW with automatic emergency braking. * Rotational speed in feed direction: 4–18 m/s. * Adjustable oscillation width and duration. * Pneumatic abrasive belt tensioning system. LED indicator for monitoring wear. * Abrasive belt centering system with electronic photocell indicator; amplitude and intensity of oscillation adjustable. 2ND GROUP: ROTARY BRUSH UNIT * Consists of 8 deburring brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and...

Koşul: yeni, Condition: new Delivery time: approx. 12 – 14 weeks from order Country of origin: Italy Price: €74,000 Leasing rate: €1,398.60 Working width: 1,350 mm Sheet thickness range – mild steel: 0.5 – 170 mm Abrasive belt dimensions: 1,370 x 2,200 mm Extraction capacity: 4,000 m³/h Extraction connection: diameter 200 mm Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Length: 1,750 mm Width: 2,100 mm Height: 2,180 mm Weight: 2,000 kg WITH 2 WORKING UNITS: 1 X ABRASIVE BELT AND 1 X TOP BRUSH UNIT Machine constructed from stress-relieved welded steel for a stable and rigid structure. Worktable with motorized height adjustment via four synchronized spindles. Independent drive motors for each processing unit. Individual extraction hoods inside the machine, one per station. Touch Screen for * Automatic star-delta switching of the main motors * Analog ammeter for each unit * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine status monitoring with alarm notifications FEED SYSTEM Robust steel structure with wear-resistant surface. Vacuum feed belt available on request. Variable feed speed via frequency inverter: 0.6 to 6.5 m/min. Rubber conveyor belt, oil- and heat-resistant. Klodpfsynmwkex Aqrot Automatic conveyor belt centering. Side guides to prevent belt lift-off. Rubber pressure rollers before and after each station, oil- and heat-resistant. Idler rollers at entry and exit tables. 1ST WORKING UNIT – R Balanced contact roller with oil- and heat-resistant nitrile rubber coating. Adjustable by eccentric shaft for working position and compensation of abrasive belt wear. Pneumatic cylinder for automatic positioning and lift-off in case of emergency stop. Both abrasive belts and/or Scotch-Brite can be used. Motorized adjustment and electronic control of contact roller height. Variable speed drive with automatic emergency brake. Pneumatic abrasive belt tensioning system. Abrasive belt tracking system with electronic photo cell. Oscillation adjustment in width and time. Contact roller adjustment positioning accuracy mm +/- 0.02 Contact roller adjustment positioning speed m/s 10 Contact roller diameter mm 180 Rubber roller hardness Shore 55 Contact roller adjustment stroke (grit adjustment) up/down mm 8 Abrasive belt speed m/s 3 – 18 Motor power kW 11 2ND WORKING UNIT – X 2 rows of vertical brushes, 10 rotating clockwise and 10 counterclockwise Transversal oscillation movement of entire unit Quick-change brush holder Brush diameter mm 115 Number of brushes pcs 20 Oscillation stroke mm 15 Rotational motor power kW 5.5 Speed (rpm) 1/min 300 – 1000 Oscillation motor power kW 0.37 Brush belt speed m/s 10.0 ACCESSORIES B Group – external horizontal drum brush, diameter 150 mm with Scotch-Brite brush €5,580.00 with 0.3 mm wire brush €5,900.00 R GROUP – ABRASIVE BELT 15 kW motor €1,060.00 OPTIONS: Return-to-sender system (workpiece is returned to operator at the front) €1,290.00 Conveyor with vacuum system, 300 mm wide – 4.0 kW €4,780.00 2 additional PVC-coated rollers at infeed and outfeed sides €2,040.00 Tampico brush system for part cleaning, 0.55 kW, diameter 150 mm €4,5...

Koşul: ikinci el, Üretim yılı: 2007, Baskı 20 - 300 kN Kjdpfxjw E Nmkj Aqrelt Valz kızak ayarı 50 mm Valz milli çapı 120 mm Valz mil yüksekliği makine yatağı üzerinde 200 mm Kontrol SIN 840 D Valz mil bağlantı uzunluğu 200 mm Valz mil devir hızı 0 - 50 dev/dak Valz mili başına tork 2700 Nm Tahrik gücü 2 x 8,4 kW Valz milleri arası mesafe min. 271 / maks. 368 mm Valz takımı maksimum dış çapı 300 mm Toplam güç ihtiyacı 26 kW Makine ağırlığı yaklaşık 7,1 ton Alan ihtiyacı yaklaşık 9,70 x 4,50 x 3,80 m Dişli haddeleme / vida haddeleme için CNC makinesi Haddeleme işlemi hidrolik Felsomat yük hücresi Komple muhafaza

Koşul: ikinci el, Üretim yılı: 1992, Sac genişliği 2050 mm Sac kalınlığı 10,0 mm ST Ön bükme 8,0 mm ST Üst silindir çapı ~ 205 mm Yan silindir çapı ~ 195 mm Kontrol: konvansiyonel Yağ kapasitesi: 80,0 litre Voltaj: 380 V Toplam güç gereksinimi: 5,5 kW Ağırlık: 3200 kg Boyutlar (U x G x Y): 4500 x 1500 x 1300 mm Ekipman: - Sağlam elektro-hidrolik 3 silindirli bükme makinesi - 3 silindirli konsept, çok çeşitli bükme ve yuvarlama seçenekleri sunar - Ön tarafta döner kontrol ünitesi * Çalıştırma - Tüm silindirlerin ve makine eksenlerinin kontrolü * Dijital konum göstergesi * Joystick'ler aracılığıyla manuel çalıştırma Ksdpfx Aexacdvjqrslt - Üst silindir çapının 1,1 katına kadar çaplar mümkündür - 53-55 sertliğe sahip dövülmüş ve sertleştirilmiş silindirler HRC - Düşük bakım gerektiren, stabil makine konsepti - Sağlam kaynaklı çelik konstrüksiyon - Kolay boru çıkarma için elektro-hidrolik katlanır yatak - Silindirler için basınç göstergesi/basınç göstergesi - Emniyet cihazı (anahtar üniteli emniyet halatı) - Kullanım talimatları (PDF)

Koşul: iyi (kullanılmış), Hidrolik diş açma makinesi satılıktır. Civata, vida ve çubuklar üzerinde diş açmak için uygundur. Sağlam endüstriyel yapıya sahip. Makine çalışan bir tesisten/lager tasfiye sürecinden gelmektedir. Durumu: kullanılmış. İnceleme mümkündür. Yükleme organize edilebilir. Metal işleme, vida üretimi ve endüstriyel uygulamalar için idealdir. Kjdpjy Ez N Defx Aqrelt

Koşul: ikinci el, Üretim yılı: 1986, Sac genişliği 2040 mm Kljdpfxey Ezzyo Aqrst Sac kalınlığı 4,0 mm Dikme aralığı 2100 mm Silindir çapı 150 mm Toplam güç ihtiyacı 7,0 KW Makine ağırlığı yaklaşık 2,2 t Alan ihtiyacı yaklaşık 2,95 x 1,0 x 1,75 mm 3 silindirli sac bükme makinesi - 2 tahrikli silindir - arka silindir elektrikli ayarlanabilir - konik bükme - ayak pedalı - acil durdurma tertibatı

Koşul: iyi (kullanılmış), Üretim yılı: 2007, Fonksiyonellik: tamamen fonksiyonel, giriş voltajı: 400 V, Yuvarlak kutular için yarı otomatik konserve kapatma makinesi. Paslanmaz çelik versiyonu. Teneke çapı: 42–163 mm, yükseklik: 26–300 mm, malzeme kalınlığı: 0,35 mm. Şu anda 99 mm için donatılmıştır. Kodpjxn Nqlsfx Aqrslt

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Detaylar - Promecam RG103 Teknik Özellikler Baskı Kuvveti: 100 ton Bükme Uzunluğu: 3000 mm Gövde Arası Mesafe: 2600 mm Boğaz Derinliği: 400 mm Dikey Strok: 100 mm Kledoy Hf Utopfx Aqrst Çalışma Hızı: 9 mm/sn Arka dayama eksen sayısı: Motor Gücü: 8,8 kW ----- Boyutlar (U x G x Y): 3050,0 × 1650,0 × 2100,0 mm Ağırlık: 5500 kg

Koşul: incelemesiz (kullanılmış), Üretim yılı: 1967, Fonksiyonellik: kontrol edilmemiş, makine/araç numarası: 20590, toplam ağırlık: 5.000 kg, kontrolör modeli: SIEMENS  COROS OP 15, silindir genişliği: 38 mm, Minimum fiyat yok - en yüksek teklife kesin satış! Klodpfoyk U T Sex Aqrst Teklif vermek, 08.04.2026 ile 16.04.2026 tarihleri arasında zamanında teslim alma yükümlülüğü doğurur! TEKNİK DETAYLAR Diş çekme çapı: 200 mm Silindir genişliği: 38 mm MAKİNE DETAYLARI Kontrol ünitesi: SIEMENS COROS OP 15 Boyutlar ve Ağırlık Boyutlar (U x G x Y): 5.500 x 2.000 x 2.200 mm Ağırlık: 5.000 kg Harici referans: 22

Koşul: yeni gibi (kullanılmış), Üretim yılı: 1997, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 107/50, Machine in fully operational condition. Multibend 2000 RAS 74.30 Folding Machine from RAS Reinhardt Maschinenbau GmbH is a universal folding machine with swivel beam, CNC control, a wide range of segmented tooling, and a working length of 3200 mm, designed for bending steel sheet (400 MPa). A manual or intelligent crowning system is integrated directly into the folding beam to ensure precise and uniform bends along the entire length. The elastic deformation of the folding beam depends on the sheet’s thickness, strength, properties, working length, and position on the support beam. Sensors embedded in the folding beam detect its actual deflection within the first 10 degrees of bending, and the system activates the actuators to adjust the camber of the beam. This compensates for beam deflection. The control system stores all parameters for each new bend and uses them for subsequent operations. The bending line is always perfectly straight with the specified radius and independent of metal thickness, length, ductility, strength, segment height, and their position in the bending area of the beam. Technical Specifications: Kledpfjyfm Udjx Aqrot - Working length: 3200 mm - Max. sheet thickness: 4 mm - Minimum permissible bending radius: 1.25 mm * sheet thickness - Minimum permissible flange height: approx. 6 mm * sheet thickness - Max. opening width of upper beam: 400 mm - Adjustment range of folding and lower beam: 80 mm - Bending angle: 0-180 degrees - Max. bending speed: 70 degrees/sec - Max. upper beam speed: - UP 44 mm/sec - DOWN 90 mm/sec - Electrical connection: 7.5 kW - Stroke depth: 10-1550 mm - Adjustment speed: 200 mm/sec - Pneumatics: 6 bar - CNC control: MULTIBEND 2000 - Machine dimensions (L × W × H): 4.5 × 2.1 × 2.65 m - Machine weight: 5590 kg - Total weight of basic configuration: 5890 kg - Year of manufacture: 1997

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2021, makine/araç numarası: 15257, We are currently offering a "Thalmann" double folding machine in excellent condition for sale. Exact designation: THALMANN - Double Folder Bending Machine - Model TD 150 – 6.4 m Series AB-SE - 6–150 – S5 – DS 3000 / 1.50 mm (Re 275 N/mm²) DFT System The machine is in very good technical and visual condition and is fully operational. Reason for sale: The Thalmann is being sold due to investment in a new EVOBEND double folding machine. The machine runs perfectly and is in daily operation. Kledpjypxx Aefx Aqrst Technical Details: Status: 12.03.2026 Controller operating hours: 5,302.1 Pump operating hours: 853.9 Number of cutting cycles: 2,947 Total number of sheets processed: 11,800 Machine data: TD 150 – 6.4 m S5 with DFT® technology Working length: 6,400 mm Insertion depth: 1,250 mm Bending beam width: 10 mm + 10 mm add-on rail Max. bending capacity: S = 20 mm, 1.5 mm steel sheet (Re 275 N/mm²) / 2.0 mm aluminium / 1.0 mm stainless steel 180° hemming capacity: 50% of bending capacity Max. bending angle: 143° (1.0 mm: 135° / 1.5 mm: 130°) Bending accuracy: +/- 0.5° (with crowning) Number of grippers / gripper travel: 4 units, +1, +1 / 15 mm - 1,250 mm Max. gripper opening: 35 mm Number of backgauge fingers / travel: 4 units / 5 mm - 1,150 mm Backgauge repeatability tolerance: +/- 0.1 mm per set Electrical voltage: 400 V / 50 Hz / 3-phase + E Rated current / fuse / pump: 32 A / 63 A / 22 kW, 75 ccm Dimensions: 8,050 x 2,250 x 2,100 mm Weight: approx. 10,000 kg Compressed air connection: 6 bar (Includes controller, total of 6 servo grippers, 6 backgauge fingers) Included additional equipment and features: - Freely running cut-to-length unit / rotary shear: 1.5 mm steel: 1 unit - Curved clamping bar (underside), H x D ratio = 1:2: 1 unit - Tapered depth stop with 2-zone function: 1 unit - Additional gripper / backgauge finger unit: 1 unit - Clamping bars made of high-strength HARDOX steel: 1 unit - Hydraulic material thickness adjustment: 1 unit - Automatic sheet loading and support table: 1 unit - M-Guard remote service support (instead of TeamViewer): 1 unit - LED bend-line lighting with RGB color selection: 1 unit Additionally, the machine is designed so that the "turning unit" (see information on the THALMANN AG website) can be retrofitted technically (information provided by previous owner – no guarantee). All information is provided without liability – subject to error and prior sale.

Koşul: yeni, Sac genişliği: 2020 mm Sac kalınlığı: 1,5 mm Kledpfxeyv Nrue Aqrjt Açılma mesafesi: 100 mm Bükme açısı: 135° Makine ağırlığı: yaklaşık 1.300 kg Aksesuarlar/Donanım: - Çelik kaynak konstrüksiyonlu makine kasası - Segmentli üst kalıp - Motorlu parça sıkma - Skalalı el volanı ile açı ayarı Opsiyonel donanım: - Manuel el volanlı arka dayama