Kullanılmış Oxford Instruments Incax-Act satın al (7.605)

Durum: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and craft businesses. They have been developed for heating larger utility areas such as workshops and production spaces in craft and industrial enterprises. These hot air systems require no long heat-up phases and are capable of heating a joinery or carpentry workshop or other production facilities in a very short time. Blodpfovz Hq Tsx Amtsi The furnaces are designed to use solid wood and its by-products as fuel, e.g. solid wood board offcuts, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces conform to the EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, as well as the safety guideline of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the emission limits stipulated by the 1st BImSchV. - Automatic mode and continuous air operation - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m3/h - Combustion chamber depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draught requirement at nominal output: 0.18 mbar - Heated volume: approx. 1,600 m3 - Heated area: approx. 300 m2 - Space requirement: width 800 mm, depth 1,170 mm, height 2,200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85 – 90 % - Required chimney draught: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet collar: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for outgoing hot air are located at the lower rear of the furnace. A maximum pipe length of 20 metres per connector is permitted for air distribution.

Durum: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industries and craft enterprises. They have been developed to heat large utility spaces, such as workshops and work areas in craft and industrial businesses. These hot air systems require no long warm-up phases and can heat up the workshop or production facilities of carpentries and joineries in a very short time. Fuel sources include solid wood and by-products such as solid wood panel scraps, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline 89/392 EC. All MARTINA series hot air furnaces—models 15, 30, 55, 85, 120, 180, 240, and 350—meet both emission stages required under the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air output: 18,000 m³/h - Combustion chamber depth: 1200 mm - Feed door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox draft: 0.2–0.3 mbar - Required draft at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ Bjdpfxevz Hqge Amtjli - Heatable area: approx. 900 m² - Required space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust temperature: 290°C - Hot air outlet connectors: 2 x Ø 450 mm - For further technical data, please refer to the attached datasheet. The two duct connectors for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ducting is permitted per outlet for air distribution.

Durum: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm air furnace MARTINA 30 The MARTINA warm air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft operations. They are designed for heating larger usable spaces such as workshop halls and work areas of craft and industrial businesses. These warm air systems require no long heat-up phases and can heat joinery or carpentry shops, as well as other production facilities, within a short time. Solid wood and its by-products—such as remnants of solid wood panels, shavings, sawdust, pellets, or briquettes—serve as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37/EC (Italian Presidential Decree No. 459 of July 24, 1996) and the safety directive of Directive 89/392/EEC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the required emission limits of the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 29.8 kW - Thermal output (kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Warm air fan: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Required draught at nominal output: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (outlet): 160 mm Bodpfx Amevz Hqmstjli - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached datasheet The two pipe outlets for outgoing warm air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per pipe outlet is permitted for air distribution.

Durum: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. These units are specifically designed for heating larger utility spaces such as factory halls and workspaces in trade and industrial operations. These warm air systems require no lengthy heat-up phase and quickly warm the workshop, joinery, carpentry, or other production spaces. Approved fuels include solid wood and its byproducts, e.g., offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA warm air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392EC. All warm air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st Federal Immission Control Ordinance (BImSchV) regarding required emission values. - Automatic and continuous fan operation - Thermal output: 14.8 kW - Thermal output Kcal: 12,720 - Fuel consumption: 4.5 kg/h - Air output: 2,400 m³/h - Firebox depth: 580 mm - Loading door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Required flue draft (nominal rating): 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Required installation space: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (suggested): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Warm air outlet nozzles: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet. Bljdpevz Hqtsfx Amtji The two warm air outlet connections are located at the rear of the furnace, towards the bottom section. A maximum of 20 meters of ducting per outlet is permitted for distributing the warm air.

Durum: yeni, Üretim yılı: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 Blsdpfx Asvz Hqyemtoi The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft enterprises. They are specifically designed for heating large utility areas such as production halls and workspaces in both craft and industrial businesses. These hot air systems require no extended preheating phases and can heat joinery workshops, carpentry shops, and other production sites in a very short period of time. Fuel sources include solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and safety regulation Directive 89/392 CE. All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1,400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space required: width 1,700 mm, depth 2,000 mm, height 2,550 mm - Weight: 1,400 kg - Flue gas pipe diameter (connection): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85–90% - Required chimney overpressure: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For more specifications, please refer to the attached datasheet The two pipe connections for the outgoing hot air are located at the lower rear section of the furnace. A maximum of 20 meters of ductwork per outlet is permitted for air distribution. Greater lengths are optionally available in consultation with the manufacturer. Please contact us for further information.

Durum: yeni, Üretim yılı: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Blodpfxovz Hq He Amtei Total power requirement: 1.2 kW Warm air furnace MARTINA 55 The MARTINA warm air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft operations. They have been designed for heating large workspaces, such as workshops and work areas in craft and industrial businesses. These warm air systems require no lengthy heat-up phases and can quickly heat joiner’s or carpenter’s workshops as well as other production facilities. Solid wood and its byproducts—such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes—are used as fuel. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 of July 24, 1996, and the safety requirements of Directive 89/392/EEC. All warm air furnaces in the MARTINA series—models 15, 30, 55, 85, 120, 180, 240, and 350—meet all emission standards required by both stages of the German 1st Federal Immission Control Ordinance (BImSchV). - Fully automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output (kcal): 43,000 - Fuel consumption: 15 kg/h - Airflow: 4,900 m³/h - Combustion chamber depth: 650 mm - Insertion door: 370 x 350 mm - Warm air blower: 1.12 kW / 230 V - Fire chamber negative pressure: 0.2–0.3 mbar - Flue draft, rated output: 0.18 mbar - Heatable room volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Footprint: width 720 mm, depth 1000 mm, height 1900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (reference): 200 mm - Efficiency: 85–90% - Chimney draft pressure: 13 PA - Flue gas temperature: 290°C - Warm air outlet connectors: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet. The two warm air outlet duct connectors are located at the rear of the furnace near the bottom. A maximum of 20 meters of duct per air outlet is permitted for air distribution.

Durum: ikinci el, Fotoğraflarda görülen Multivac şekillendirme ve kapama takımları satılıktır. Her biri 420 mm folyo genişliği için uygun 2 takım bulunmaktadır. Multivac 19.200.1240.95. Tepsi ölçüsü: 6x11cm x 18cm. Fiyat: 2000 EUR. Diğer takım: 9x11,5cm x 11cm, ürün numarası 105793236, fiyatı 2000 EUR. Bledpfx Aowth Uismtoi

Durum: yeni gibi (kullanılmış), Seri: 26557-PO1 UV dezenfeksiyon bölgeli paslanmaz, değişken hızlı konveyör, UV dezenfeksiyon bölgesi iki dizi UV lambasından oluşur, üst dizi tel bandın üzerine monte edilir ve alt lamba dizisi yukarıya bakacak şekilde telin altına monte edilir. Bu, konveyöre yerleştirilen bir ürünün her tarafında dezenfeksiyon sağlamak için ayarlanmıştır, HMI dokunmatik ekran kontrolleri, bant boyutları 3500mm x 500mm, paslanmaz tel örgü bant, manuel, 1Ph Bjdpfx Amehxyq Eeteli

Durum: mükemmel (kullanılmış), dingil konfigürasyonu: 2 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, izin verilen dingil yükü (dingil 2): 10.000 kg, ilk tescil: 06/2020, yükleme alanı uzunluğu: 7.400 mm, yükleme alanı genişliği: 2.490 mm, yükleme alanı yüksekliği: 2.700 mm, toplam genişlik: 2.550 mm, lastik boyutu: 435/50R22,5, dingil mesafesi: 4.920 mm, Üretim yılı: 2020, Donanım: hidrolik arka platform, Aks konfigürasyonu Lastik ölçüsü: 435/50R22,5 Aks markası: GOODYEAR Ön aks: Maks. aks yükü: 10.000 kg; Sol lastik profili: %40; Sağ lastik profili: %40 Arka aks: Maks. aks yükü: 10.000 kg; Sol lastik profili: %40; Sağ lastik profili: %40 Bedpfxjy Tpdrs Amteli Ağırlıklar Boş ağırlık: 6.260 kg Yük kapasitesi: 13.740 kg Azami toplam ağırlık: 20.000 kg Fonksiyonel Yükleme rampası: DHOLLANDIA, arka kapak, 2.000 kg Yükleme alanı yüksekliği: 110 cm Durum Teknik durum: çok iyi Görsel durum: çok iyi Diğer bilgiler Daha fazla bilgi için Martin Vos Vos, Martin Martin Vos veya Martin Vos ile iletişime geçiniz. = Firma bilgileri =

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, Hoerbiger Origa P120S-25 Lineer aktüatör. Bedpfx Astwqp Asmteli İyi çalışır durumda. Lütfen diğer ilanlarımıza da göz atın.

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, Koganei ORGA40X2750 Lineer aktüatör. İyi çalışır durumda. Bljdpfxotwqqgo Amtei Lütfen diğer ilanlarımıza da göz atın.

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, Alsident Sistem Ekstraksiyon Kolları. Alsident System markasının ekstraksiyon kolu, çalışma sırasında solunum atmosferini temiz tutmak için tasarlanmıştır. Bu emiş kolu hem tavana hem de çalışma masasının duvarına montaj için uygundur. İyi çalışır durumdadır. Lütfen diğer ilanlarımıza da göz atın. Bodpfx Aoupv U Homtoli

Durum: ikinci el, Üretim yılı: 2018, güç: 29,5 kW (40,11 bg), toplam ağırlık: 2.160 kg, İç reorganizasyonlarımız nedeniyle, stoklarımızda bulunan aşağıdaki makineyi satışa sunmak istiyoruz: Açıklama: HDD Yatay Yönlendirilmiş Sondaj Makinesi Makine Tipi: Grundodrill 4X Seri Numarası: 4X1826295M Üretim Yılı: 2018 Ağırlık: 2.160 kg Motor Gücü: 29,5 kW Maksimum Çalışma Basıncı: 310 bar Uzunluk: 3.500 mm Genişlik: 1.200 mm Yükseklik: 1.710 mm Blodpfjy Nmffox Amtsi Bakım ve servis işlemleri kısa süre önce TRACTO firmasında gerçekleştirilmiştir. Cihaz çalışır durumdadır. İlgilenenler fiyat tekliflerini veya tekliflerini bize iletebilirler. Sorularınız veya daha fazla bilgiye ihtiyacınız varsa, lütfen bize mesaj yazın veya bizi arayın.

Durum: kusurlu yedek parçası bulunmakta (kullanılmış), yakıt türü: elektrikli, toplam ağırlık: 2.465 kg, süspansiyon: çelik, Donanım: kabin, HEK GTP Dual 1500 – Transport platform / Material hoist Compact construction hoist from HEK Manufacturing BV with a load capacity of 1,500 kg and a maximum lifting height of 120 m (anchored). The platform (4,000 x 1,600 mm) accommodates 2 to 7 persons when used as a transport platform. When used as a material hoist, it is exclusively intended for goods. Power requirement is only 32 A (slow-blow). Equipped with an advanced safety system, including centrifugal brake, overload protection, and emergency brake release. Complies with Machinery Directive 89/37/EEC. Diagnostics via display on the platform. Speed: 12 m/min (transport) / 24 m/min (materials) Anchoring distance: 6–8 m Bjdpfx Amey R Ruyetjli Motor power: 2 x 4.8 kW / 400 V / 50 Hz

Durum: iyi (kullanılmış), Üretim yılı: 2010, Fonksiyonellik: tamamen fonksiyonel, Satılık CTP pozlama makinesi Screen PT-R 4300S besleyici/AGFA Avalon N4 ile birlikte. GJ online banyo makinesi. İstifleyici. Sunuculu Apogee yazılımı. Bedoykmywopfx Amteli

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, boş ağırlık: 6.150 kg, azami yük ağırlığı: 15.850 kg, toplam ağırlık: 22.000 kg, dingil konfigürasyonu: 1 dingil, izin verilen dingil yükü (dingil 1): 10.000 kg, ilk tescil: 12/2012, yükleme alanı uzunluğu: 10.500 mm, yükleme alanı genişliği: 2.450 mm, yükleme alanı yüksekliği: 2.650 mm, yükleme alanı hacmi: 65 m³, toplam uzunluk: 10.600 mm, toplam genişlik: 2.550 mm, süspansiyon: hava, lastik boyutu: 275/75 R22,5, lastik durumu: 60 yüzde, Üretim yılı: 2012, Donanım: hidrolik arka platform, 12/2012 model yılı Bljdpfxex Iu Hzo Amtei Fransız tipi tenteli üst yapı TRIDEC kontrollü yönlendirmeli tek dingil King pimi bağlantısı 1,15 m Uzunluk 10,60 m İç yükseklik 2,65 m Kayar tente sistemi (aç/kapa) SAF dingil 275/75 R22,5 lastikler Arka Dhollandia yükleme rampası Şasi altına katlanabilir, taşıma kapasitesi 1.500 kg Bağımsız akü ile besleme

Durum: yeni gibi (kullanılmış), Üretim yılı: 2010, TETRA PAK A3 COMPACT FLEX 200/250 EDGE TAM ENTEGRE HATTI İÇERİĞİ: 1. TETRA PAK A3 COMPACT FLEX HIZLI DEĞİŞİM 200/250 EDGE DOLUM MAKİNESİ V200, Üretim Yılı: 2010 15.120 Çalışma Saati Kapasite: saatte 9.000 karton 2. TETRA PAK ACHX 10-0400-44 HELİKS KARTON AKÜMÜLATÖRÜ V400, Üretim Yılı: 2010, 17.431 Çalışma Saati 3. TETRA PAK STRAW APPLICATOR TS30 U-FORM Yükseltilmiş V300, Üretim Yılı: 2010 4. TETRA PAK KAPAK TAKICI CAP30 FLEX PRO23 Bsdpfx Aoya Nf Iomteli V200, Üretim Yılı: 2010, 10.914 Çalışma Saati 5. TETRA PAK FİLM SARMALAMA MAKİNESİ 32 V400, Üretim Yılı: 2010, Hiç kullanılmamış, sadece 45 saat! 6. TETRA PAK KARTON KOLİ YAPICI CBP 32 V400, Üretim Yılı: 2010, Wrap Around 7. TETRA PAK HAT KONTROLÜ LC30+ 8. KONVEYÖR SİSTEMİ 9. VİDEOJET 1620 YAZICI DAHİLDİR Hat yeni gibi durumda. Lokasyon: İsveç. Hemen sökülmeye ve sevkiyata hazır. Fiyat talep üzerine.

Durum: iyi (kullanılmış), PLC genişletme modülü, anahtarlama panoları, kontrol, manevra modülü, baskılı devre kartı modülü Bsdpfx Amjmnud Setsli -Üretici: Phoenix Contact, PHG manevra modülü -Tip: UMK-SE 11,25-1 : 3522449 -Adet: 2x modül mevcut -Fiyat: adet başına -Ölçüler: 115/75/Y40 mm -Ağırlık: 0,1 kg/adet.

Üretim yılı: 2012, durum: iyi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, HKAF 12-30 tipi bir CFT kompakt filtre tekniği üstten monteli toz emme sistemi satılıktır Sistem tamamen işlevseldir ve bağlantıdan hemen sonra kullanıma hazırdır CFT Digital sayesinde sistem için tüm belgeler mevcuttur İletişim bilgileri satın alma işleminden sonra iletilebilir. Teknik veriler: Yapım yılı: 2012 Uzunluk: 2476 mm Genişlik: 1277 mm Yükseklik: 2330 mm Ağırlık: 600 kg Egzoz havası akış hızı: 28 m3/dak Filtre elemanları: 12 adet Filtre alanı: 30 m² Filtre malzemesi PMB 600*500 Şok valfleri: 4 adet Döner çevrim kontrol ünitesi: 12 çevrim Basınçlı hava parametreleri: 4,5 bar Ek ücret karşılığında yükleme ve veya nakliye mümkündür Bjdpfx Amjrfcpmjteli Fiyatlar artı katma değer vergisi Randevu ile görüntüleme mümkündür. Bize ulaşın, ekibimiz size yardımcı olmaktan mutluluk duyacaktır. Takas veya değişim mümkün! Makine alım / satımı ÜRETIM VE METAL IŞLEME MAKINELERI ALIM / SATIMI VE ÇOK DAHA FAZLASI. Üretiminiz için yüksek kaliteli ama ucuz bir metal işleme makinesine mi ihtiyacınız var? Ya da sizinkini satmak mı istiyorsunuz? Daha fazla bilgi veya iletişim detayları için lütfen web sitemizi ziyaret edin

Üretim yılı: 2016, durum: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, We offer these ready-to-use AUMA actuators and JC Spain gate valves, 10" to 42" gate valves with actuators, type: Valves for Oil Industry, year of manufacture 2016. High-performance gate valves Sizes: 10" to 42" Pressure class: 600 lbs, stellite 6 hard-facing and 13% Cr trim (internal fittings) BWE (butt-weld ends), wedge gate valve, bolted bonnet, OS&Y to ASTM A-216 WCB (cast carbon steel) Bodpsy D Ilijfx Amtsli The majority of the units are equipped with explosion-proof, intelligent AUMA AUMATIC ExC actuators. Optionally, we can refurbish the actuators and gate valves and perform a factory acceptance test (FAT). Actuator manufacturer: AUMA Riester GmbH & Co. KG Model: 10" to 42" gate valves with actuator ● 42" gate valves (2 units): equipped with AUMA SAEX 30.1 actuators ● 32" gate valve (1 unit): equipped with AUMA SAEX 16.2 / ACEXC 01.2 / GK40.2 ● 30" gate valves (4 units): equipped with AUMA SAEX 16.2 / ACEXC 01.2 / GK40.2 ● 30" gate valves (2 units): handwheel (can be fitted with actuator) ● 16" gate valves (9 units): equipped with AUMA SAEX 14.6 / GK30.2 Germany actuators (Ex-proof) ● 10" gate valve (1 unit): handwheel Location: Ras al Khaimah, UAE If you have any questions or need more information, please feel free to contact us by message or phone.

Durum: ikinci el, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 12/2024, yükleme alanı uzunluğu: 13.500 mm, yükleme alanı genişliği: 2.475 mm, yükleme alanı yüksekliği: 1.435 mm, toplam genişlik: 2.475 mm, Üretim yılı: 2024, Donanım: ABS, PACTON tri-axle steered crane semi-trailer, type TPL.342.C-B Dimensions and Weights: Chassis length: 13,300 + 200 mm Loading platform width: 2,475 mm Overall width: 2,550 mm Front overhang: 1,200 mm Wheelbase (axle 2): 8,000 mm Rear overhang (axle 2): 3,800 mm Fifth-wheel pin to landing gear: 2,500 mm Front turning radius: 2,040 mm Axle spacing: 2,020 mm Neck height: 270 mm Fifth-wheel height: 1,165 mm Loading height: 1,435 mm Kingpin load: 15,000 kg Total axle load: 27,000 kg Gross weight: 42,000 kg Axles and Air Suspension: SAF air suspension with three rigid, low-maintenance axles equipped with disc brakes, technical axle load per axle 9,000 kg, featuring a height control valve on axle 3. Raise/lower valve installed. Bledpfx Amoy Hacletoi The two rear axles are force-steered by a Tridec single-rod steering system (linear). Lift axle on the 1st axle, operated manually. Tyres: Single tyres with 6 steel rims, size 22.5 x 11.75 (center hole centering) equipped with premium A-brand tyres selected by Pacton (Goodyear, Bridgestone or Continental) in 385/65 R22.5. Floor: Full TÜV-approved floor, including center area with 4 mm steel floor 4 mm thick steel floor between the longitudinal beams. Front wall: Removable aluminum front wall, 1,200 mm high, 6 mm thick. At approximately 350 mm height on the outside, there is a light/air console with connectors. Access ladder on the left side with four steps. Side walls: 2 x 5-fold drop and removable aluminum side walls, 1,000 mm high (each side wall with three hinges) Kinnegrip aluminum stanchions (K20 version) Aluminum partition board including 4 x 2 pockets for stanchions and 2 x insert stakes Kennis Loader Crane R16/71-3 incl. premium stone grapple Sample pictures, crane images to follow shortly. Available immediately.

Durum: ikinci el, Üretim yılı: 2018, REF: MM6441 Wenzhou Jiangbo Dairy Equipment Factory Co. Ltd (Çin) 5000L paslanmaz çelik karıştırıcılı tank. Model - DCG. Bedpfsza T Slsx Amteli Seri No. - 180919. Üretim yılı - 2018. Devir - 36 d/dk. Elektrik gereksinimi – 415 V / 50 Hz / 3 faz.

Durum: iyi (kullanılmış), Tünel satılık – Kendi kendine istiflenen spiral dondurucu Frigoscandia GYRoCOMPACT, en kompakt, hijyenik ve verimli spiral dondurucudur. Bjdpfx Aow Tc Iiomtsli

Durum: iyi (kullanılmış), Güç kaynağı, doğrultucu, enerji beslemesi, anahtarlamalı güç kaynağı, ray montajlı güç kaynağı, güç modülü, servo modül, çiftli güç kaynağı Bodpfxoxpf Dke Amteli -Üretici: Phoenix Contact Güç Kaynağı Quint Power -Tip: QUINT4-PS/1AC/24DC/20 -Sipariş Numarası: 2904602 -Giriş: 100-240V AC -Çıkış: 24V DC 20A -Adet: 16x güç kaynağı mevcut -Fiyat: adet başına -Ölçüler: 130/70/Y130 mm -Ağırlık: 1,4 kg/adet

Durum: yeni, Üretim yılı: 2025, Fonksiyonellik: tamamen fonksiyonel, IMPACT 4in1 ab Lager Europa MANUELLE FASERLASER 4-IN-1-MASCHINE MIT DOPPELTER DRAHTZUFÜHRUNG SCHWEISSEN – REINIGEN – SCHNEIDEN – SCHWEISSNAHTREINIGUNG Der IMPACT FL 3000 ist die modernste Laser-Kombimaschine zum Schweißen, Reinigen und Schneiden in einem Gerät. Dank spezieller Software und angepasster Parameter lassen sich mit dieser Laseranlage sowohl Reinigungs-, Schneid- als auch Schweißarbeiten durchführen. Blodjvca Nropfx Amtei Das Gerät gewährleistet besonders niedrige Betriebskosten: Der Energieverbrauch beträgt lediglich etwa 10-20 % im Vergleich zu herkömmlichen Schweißverfahren, und die Schweißgeschwindigkeit ist 3 bis 10-mal schneller als beim traditionellen Lichtbogen-, Argon- oder Plasmaschweißen. Die meisten Anwender nutzen eine Schweißmaschine nur zu maximal 20 % der Zeit, gleiches gilt für Reinigung und Feinschnitt. Eine Schweißmaschine mit Zusatzfunktionen wie Reinigung und Schneiden, ab 1,5 kW Leistung, kostet normalerweise mindestens 25.000 bis 30.000 Euro. Wir bieten Ihnen die gleiche Lösung mit Schneid- und Reinigungsfunktion für Stahl und andere Materialien – und das zu nur 50 % der üblichen Investitionskosten. Bei Interesse senden wir Ihnen gerne ein vollständiges Angebot zu. Wir liefern 3-in-1-Maschinen mit 1,5, 2 und 3 kW Leistung, jeweils inklusive Drahtvorschubeinheit. Die 3-kW-Variante verfügt über zwei Drahtvorschubsysteme für einen schnellen Wechsel während des Schweißens. 1,5 und 2 kW laufen mit 1-Phasen-220-Volt-Anschluss. 3 kW benötigt 3x 380 Volt. Preis ab Werk (ab Lager Europa), Verladung auf LKW inklusive. Transport, Montage, Inbetriebnahme, Schulung sowie jährliche Wartungsverträge sind auf Wunsch gegen Aufpreis verfügbar. Die Installation und Schulung erfolgt ausschließlich durch unser hochqualifiziertes Serviceteam an drei Standorten in Europa: Niederlande, Deutschland, Rumänien.