Kullanılmış Cnstamp Abkantwerkzeuge/Hemming Die satın al (5.768)

Koşul: yeni, Zudrückwerkzeuge von Trumpf/Wila typ für Trumpf/Safan Darley Hodper Ai Tksfx Ambol

Koşul: yeni, abkant pres kalıbı Multi-V kalıpları Hjdsip Dayspfx Ambsl

Koşul: yeni, Hemming tool-Punch and die for Bystronic Hjdpfx Ameqxq Dnsbel

Koşul: yeni, Amada/Promecam için kenar kıvırma aleti Hodpfxjr Aixzo Ambjl Amada/Promecam için Zudrückwerkzeuge

Koşul: yeni, SIKMA ALETLERİ, Amada için Kenar Kıvırma Aleti Hjdpfx Amoqxq Hbobjl

Koşul: yeni, Stempel von Wila typ für Trumpf/Safan Darley und alle Abkantpressen verwenden das Wila-Klemmensystem Hedjr Akraspfx Ambol

Koşul: yeni, Amada/Lvd/Trumpf için hemming aleti Hsdpfxoi Hbcwj Ambol

Koşul: yeni, EHT abkant pres için zımba ve kalıplar Hsdpsiq Dnkjfx Ambjl

Koşul: yeni, AMADA/Promcam tarzı merkezi 1V abkant pres kalıpları Hjdein I Hrjpfx Ambel

Koşul: yeni, Trumpf'tan AMADA/Promcam tarzı merkezi 1V abkant pres kalıpları Hsdpfxeiqf R Ie Ambel

Koşul: yeni, Lvd'den AMADA/Promcam tarzı merkezi 1V abkant pres kalıpları Hedpfeiqgaasx Ambjl

Koşul: yeni, V160mm/120mm L200mm Hsdpfxolp Hvho Ambsl

Koşul: yeni, Weinbrenner abkant pres için abkant pres aletleri/zımbaları Hsdpfsi Hbbyox Ambel

Koşul: yeni, Bystronic-Amada'dan T-matrisleri Hjdpfokvlxhex Ambjl

Koşul: yeni, Amada/Promecam tarzı V100mm Pres fren kalıpları Hodpfx Amewcx Ncjbjl

Koşul: yeni, presleme kuvveti: 160 t, V80mm Amada tipi pres fren kalıpları Hsdpfjwcxtbsx Ambol

Üretim yılı: 2025, Koşul: yeni gibi (sergi parçası), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 20251122351, Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredded material, granulate, etc. Aluminum angle conveyor including mobile underframe Horizontal section: 1,200 mm Inclined section: 1,800 mm Angle of bend: 40 degrees each Infeed height (from ground): 500 mm Discharge height: 1,600 mm Hodpfxoyt Ia Ds Ambol Conveyor belt width: 700 mm Extremely robust aluminum construction, heavy-duty design! PU conveyor belt with cleats and corrugated sidewalls Drive: 0.55 kW motor (adjustable), speed approx. 0.77 m/sec Connection: 220/240V, 50Hz, IP54 protection class Drive, etc., ready for connection, motor control optional Corrugated sidewalls: 80 x 50 mm T-60 cleats, short pitch 2-ply, particularly cross-stable Corrugated sidewalls, cleats, and belt seamlessly high-frequency welded In the bend area, the belt is guided on both sides by 4 hold-down rollers each. The belt features a 100 mm edge-free zone on both sides. Due to the corrugated sidewalls on both sides, the usable width of the conveyor belt is reduced: Usable width: 400 mm, as follows: (Top view) Lateral arrangement: 100+50+400+50+100 mm Demonstration unit - Immediately available! - Can be inspected under power All prices are net prices plus 19% VAT. All information is given without guarantee, subject to prior sale!

Üretim yılı: 2025, çalışma saatleri: 5 h, Koşul: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 2025112701, Aluminium inclined conveyor belt with substructure including adjustable feet and machine feet for leveling uneven surfaces - Feed height: 500 mm - Inclined section: 3,000 mm - Discharge height: 2,000 mm Design: Aluminum structural construction - Reinforced triple profile 135x45 mm - Full-surface discharge sheet, 2.0 mm galvanized Drive roller + return roller made of S235 steel, welded and machined Ø150x620 mm crowned turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted geared motor, 1.10 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection rating IP54 Drive pre-wired up to motor terminal box (Commissioning must be carried out by a qualified electrician) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm Endless, high-frequency welded with stepped splice Belt material: 2-ply, specially cross-stable Hodpjydb Rwofx Ambel 2 pcs. wave edge profiles, 80 mm high, 50 mm wide, high-frequency welded flush with the edge 18 pcs. T60 cleats, 430 mm long, pitch approx. 508 mm, welded centrally Belt material: 2-ply, specially cross-stable Due to the wave profiles on both sides, the usable width of the conveyor belt is reduced: Usable width 500 mm, calculated as follows: (top view) transverse arrangement 50+500+50 mm

Koşul: yeni, Üretim yılı: 2026, Aluminum Inclined Conveyor with Underframe (PU/PVC with Cleats & Corrugated Sidewalls) We offer a robust inclined conveyor built with aluminum profiles for the reliable transport of both unit and bulk goods – ideal for industry, manufacturing, recycling, woodworking, and many other sectors. Thanks to cleats and corrugated sidewalls, safe material conveyance is ensured even at steep inclines. _____ Technical Data (Sample Configuration): ✔ Feed height: custom adjustable ✔ Inclined section: lengths freely selectable ✔ Discharge height: custom adjustable ✔ Underframe including leveling feet & machine mounts or transport rollers → allows leveling on uneven floors / ensures stable installation _____ Design / Frame: ✔ Aluminum profile construction ✔ Double profile 90x45mm or reinforced triple profile 135×45mm ✔ Full-surface cover plate 2.0 mm galvanized or 1.4301 stainless steel (VA) _____ Rollers / Drive: ✔ Drive roller + return roller made from S235 steel, welded and machined ✔ Diameter: 100, 150, or 220 mm ✔ Shafts secured with bearing housings ✔ Drive: shaft-mounted gear motor 0.18 – 3.0 kW ✔ Belt speed: individually adjustable ✔ Connection 230/400V, 50Hz, protection class IP54 (standard) ✔ Drive prewired to motor terminal box ➡️ Commissioning by a qualified electrician required _____ Conveyor Belt / Carriers: ✔ PVC conveyor belt DM 10/2 0+005 PVC green ✔ Belt widths: 100, 200, 300, 400, 500, 600, 700, 800, 900 or even 1,000 mm ✔ Endless high-frequency welded (stepped joint) ✔ 2-ply, 3-ply with high transverse rigidity ✔ Corrugated sidewalls: up to 80 mm high ✔ Cleats: custom adjustable Hjdpfx Amsyhzpljbsl ✔ Cleat pitch: custom adjustable _____ Optional Features / Accessories: ✔ Infeed chutes ✔ Hoppers / Feed hoppers ✔ Storage hoppers ✔ Discharge hoppers ✔ Custom lengths / widths ✔ Cleats & sidewalls to customer specification _____ ✔ Custom fabrication to customer requirements ✔ Industrial-grade quality “Made in Germany” Dimensions, versions & pricing upon request. Just send us a message – we provide fast & straightforward advice. Discover tailor-made solutions for your industry! As an innovative mechanical engineering company, we are proud to offer individual solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems to flat belt conveyors, inclined conveyors, angle conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, crossbelt magnetic separators, drum magnetic separators, and dosing hoppers – all tailored to each customer’s specific requirements. We understand that every industry and project is unique. That’s why we customize our solutions to your exact requirements and specifications. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions in close cooperation with you. For us, every project is unique – for every problem, we find the right solution! Challenge us! Contact us and see how we can turn your requirements into customized solutions. Together, we will shape the future of your production processes!

Üretim yılı: 2026, Koşul: yeni, Robust steel construction – designed for continuous operation The base structure is made of a sturdy structural steel frame, manufactured from laser-cut, bent, and welded components. The surface features a high-quality powder coating in RAL0208. Modular design: Our conveyor belt frames are available as transportable sections. This design allows the system to be: - Easy to transport and assemble - Extendable or shortenable at any time - Ideally suited for future modifications or plant adjustments Conveying technology & carrier rollers The carrier roller assemblies in the lower run are engineered for smooth and reliable operation: - Shaft diameter: 60/15 mm - Roller station spacing: approx. 500 mm (customizable) - Closer roller spacing in the loading area upon request for increased load capacity Drive & rollers The drive drum and tail drum are made of S235 steel, welded and precision-machined: - Ø 220 × 700 mm, crowned surface - Shaft secured with bearing housings - Bearing points equipped with robust UCF flange bearings including grease fittings Hsdpjyhznnofx Ambel Drive unit: - Hydromec worm gear motor 1.1 kW - Belt speed: approx. 1.15 m/s - Connection: 400V / 50 Hz, protection class IP54 - Drive prewired up to the motor terminal box (commissioning must be carried out by a qualified electrician) - Motor mounted on the right in direction of conveyance, pulling configuration Conveyor belt A durable, industrial-grade belt is used: - DM EP250/2, 3+1.5 mm cover - Chevron profile, 17 mm high, 650 mm wide - Joint area without profile - Endless hot vulcanized Custom options & accessories (as required) Thanks to the modular structure, all components can be precisely tailored to your process, e.g.: ✅ Special lengths & widths ✅ Side plates / wave edges (for lateral guidance and enhanced conveying stability) ✅ Infeed plates/loading plates (wear-resistant, gentle on material) ✅ Feed/infeed hoppers (for clean loading of bulk materials) ✅ Discharge plates/chutes ✅ Cleat profiles / alternative belt qualities ✅ Adjustable roller spacing & carrier roller geometry ✅ Special paint finishes / customer-specific designs

Üretim yılı: 2026, Koşul: yeni, DM Flat Belt Conveyor Type FB-700 without substructure for conveying bulk materials Conveyor length: 6,000 mm Hsdpfxjyhznhj Ambsl Belt width: 650 mm Construction made of structural steel, laser-cut, folded, and welded Base frame powder-coated RAL 5015 Modular conveyor frame design / segments available in transportable lengths. Frame construction can be extended or shortened at any time. Carrier roller configuration in the return side, axle Ø60/15 mm Roller station spacing approx. 500 mm (customizable) Reduced spacing in the loading area Drive drum + tail drum made of S235 steel, welded and machined Ø220 x 700 mm, crowned and milled; shaft fixed with pillow block bearings. Drive: Hydromec worm geared motor, 1.1 kW, belt speed 1.15 m/sec Connection 400V, 50Hz, protection class IP54 Drive delivered ready for connection up to motor terminal box (Commissioning must be performed by a qualified electrician) Motor mounted on the right in direction of conveying, installed in pulling configuration. Bearing points equipped with robust UCF flange bearings including lubrication nipples. Rubber conveyor belt DM EP250/2 3+1.5 mm cover Chevron profile, 17 mm high x 650 mm wide Splice area without profile, endless hot vulcanized

Koşul: yeni, Üretim yılı: 2026, Aluminum Angle Conveyor Belt with Substructure including adjustable leveling feet and machine feet for leveling uneven floors Horizontal section: 2,500 mm Inclined section: 6,000 mm Bend angle: 45° Height of horizontal section: 350 mm Total conveyor length (measured on the floor): 6,750 mm Discharge height at conveyor end: 4,500 mm Design: Aluminum structural construction - Reinforced double profile 90 x 45 mm - Full-surface discharge sheet, 2.0 mm, galvanized Drive roller + deflection roller made of S235 steel, welded and machined Ø 100 x 620 mm, crowned and turned, shaft fixed with plummer block bearings. Drive: shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400 V, 50 Hz, protection class IP54 Drive pre-wired up to motor terminal box (Startup must be performed by a qualified electrician) PU Conveyor Belt DM 10/2 0+005 PU including PU wave edge, petrol matt Belt width: 600 mm 2 pcs. wave-edged sidewalls, 50 mm high, 25 mm wide, high-frequency welded 42 pcs. T-40 cleats, 400 mm long, approx. 401 mm pitch Hodpeyhzhzjfx Ambsl Belt material: 2-ply, especially cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt is supplied with a 70 mm non-edged zone on both sides. Due to the wave-edged sides, the usable belt width is reduced: Usable width: 300 mm, as follows: (Top view) transverse arrangement 70+25+5+400+5+25+70 mm Special Features: Belt guided via PVC wedge strip on the running surface, profile 10 x 6 mm - including widened substructure for head load stability - including cut-out in the discharge sheet - including sliding joints on drive and deflection rollers - including non-magnetic zone for overhead magnetic separator - including holder for DMPM1200 in the inclined section Discover custom solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and further processing industries. Our extensive product portfolio includes everything from conveyor systems, flat conveyor belts, incline conveyors, and angle conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnets, and dosing bunkers—each customized to our customers' individual requirements. We understand that every industry and project is unique. That's why we tailor our solutions precisely to your specifications. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For every problem, we find the right solution—no job is too specialized! Challenge us! Contact us to find out how we can translate your requirements into bespoke solutions. Together, we’ll shape the future of your production processes! Conveyor belt, conveyor system, discharge conveyors, belt conveyors, magnetic separators, overband magnets, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, grate magnets, metal separator, block magnet, filter systems, dosing bunker, feed hopper, filling systems.

Koşul: yeni, Üretim yılı: 2026, Aluminium Angled Conveyor with Substructure including adjustable leveling feet and machinery feet for compensation of uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Incline angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminium modular construction - Triple-reinforced profile 135x45 mm - Fully covered discharge sheet, 2.0 mm galvanized Drive roller + return roller made of S235 steel, welded and machined Ø150x820 mm crowned-turned, shaft fixed with bearing units. Drive: Shaft-mounted geared motor 1.1 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive pre-wired up to motor terminal box (Commissioning must be carried out by a qualified electrician) PVC conveyor belt DM 15/4 0+007 PVC, including PVC wave edge, green Conveyor belt width: 800 mm Hsdpfx Amjyhzhujbsl 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm pitch Belt material: 2-ply, highly cross-rigid In the bend area, the belt is guided on each side by 3 hold-down rollers. The belt is designed with a 70 mm edge-free zone on each side. Due to the double wave edge, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (Top view) crosswise: 100+50+5+490+5+50+100 mm Discover tailored solutions for your industry! As an innovative mechanical engineering company, we are proud to offer customized solutions for the recycling, food, and further processing industries. Our extensive product portfolio covers everything from conveyor systems, flat conveyors, incline conveyors and angle conveyors to Z-shaped conveyors. Additionally, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements. We understand that every industry and every project is unique. That’s why we adapt our solutions specifically to your needs and specifications. Complex projects are exciting challenges for us, and we look forward to developing innovative solutions together with you. With us, there are no off-the-shelf products – for every problem, we find the right solution! Challenge us! Contact us and discover how we can transform your requirements into bespoke solutions. Together, we shape the future of your production processes! conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems

Koşul: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, Aluminum Z-shaped conveyor belt with substructure, including adjustable feet and omnidirectional transport casters with locking brakes. Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle at each bend: 60° Total conveyor belt length (measured on the floor): 3,500 mm Hedpfx Amjyhzhnebjl Height of the horizontal section: 400 mm Design: - Aluminum construction profile, double-reinforced 90x45 mm - Full-surface discharge plate, 2.0 mm galvanized - Drive drum and tail drum: S235 steel, welded and machined Ø100x720 mm, crowned and precision-turned, shaft mounted on pillow block bearings. - Drive: Mounted gear motor, 1.10 kW, belt speed: 0.53 m/sec - Electrical connection: 230/400V, 50Hz, protection class IP54 - Drive supply cable pre-installed up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU with wave edge, petrol matte finish, AS (anti-static), especially laterally rigid with a hard cover - Conveyor belt width: 700 mm - 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded - 34 pcs. T40 cleats, centrally positioned, 430 mm long, spacing approx. 299 mm - Belt material: 2-ply, extra laterally rigid - In the bend area, the belt is guided on each side by 3 hold-down rollers The belt is manufactured with a 70 mm edge-free zone on both sides. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, calculated as follows: (Top view) cross arrangement: 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Including cut-out in the discharge plate - Including slide bearings in the drive and tail drums.

Koşul: yeni, Üretim yılı: 2026, Aluminium inclined conveyor belt with supporting frame including adjustable feet and machine feet for leveling uneven surfaces - Infeed height: 500 mm - Inclined section: 2,000 mm - Discharge height: 1,200 mm Specification: Aluminum structural design - Triple reinforced profile 135x45 mm - Full-surface discharge plate, 2.0 mm galvanized Drive roller and return roller made from welded and machined S235 steel Ø150x620 mm, crowned and precision-turned, shaft fixed with bearing units. Drive: Mounted gear motor 1.10 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive pre-wired up to the motor terminal box (commissioning must be performed by a qualified electrician) PVC conveyor belt DM 10/2 0+005 PVC green Conveyor belt width: 600 mm Endless high-frequency welded with stepped joint Belt material: 2-ply, especially cross-stable 2 pcs. corrugated sidewalls, 80 mm high, 50 mm wide, side-flush high-frequency welded 14 pcs. T60 cleats, 400 mm long, pitch approx. 296 mm, center-mounted Belt material: 2-ply, especially cross-stable Hjdpfxsyhzhbe Ambjl Due to the corrugated sidewalls on both sides, the usable width of the conveyor belt is reduced: Usable width 500 mm, as follows: (top view) transverse layout 50+500+50 mm