Kullanılmış Fliegl Zts 200 satın al (16.434)

Koşul: ikinci el, makine/araç numarası: WFDFLT22001007597, boş ağırlık: 6.200 kg, azami yük ağırlığı: 11.800 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2018, lastik boyutu: 235/75 r17,5, Üretim yılı: 2017, Further information Chassis: Steel welded construction, double-cranked with low-bed sections in front of and behind the axle assembly; low-bed sections are beveled for drive-in capability; turntable with heavy-duty ball race ring; foldable rear support; wheel chocks; side underrun protection; quarter shell mudguards. Lashing eyes: Over the front axle: 2 pairs of ring lashing eyes, each rated to 5 tons, at the cranked section. Low-bed/rear axle: 6 pairs of lashing eyes, each rated to 8 tons, located laterally in the low-bed section. 6 pairs of lashing eyes, each rated to 5 tons, positioned between the longitudinal beams. Pair of stake pockets recessed into the outer frame (internal dimension 70 x 40 mm), or, as an alternative to stake pockets, 5-ton ring lashing eyes recessed in the floor. Gbodpfji Ri N Usx Afrol Drawbar: Certified 40 mm towing eye. Axles: BPW drum brake axles. Braking system: 2-line compressed air braking system; spring-loaded parking brake; 2 non-interchangeable coupling heads at front. Electrics: 24V electrical system; multi-chamber lights; side marker lights in yellow; 2 white position lights at the front; 2 white/red outline marker lights at the rear; rotating beacon with bracket; pair of illuminated, extendable warning panels (extendable up to 3,000 mm); 2 x 7-pin non-interchangeable connectors at front. Floor: Front cranked section with steel/chequer plate covering; storage box integrated into the drive-on bevel to the cranked section; drive lane area and central area between the beams with steel/chequer plate covering; rear bevel with 70 mm softwood floor; low loader loading area including rear bevel: 5,900 mm. Loading ramps: Hook-on bar for aluminium ramps across the full width, U-profile across the full width; pair of aluminium ramps, each 800 mm long and approx. 400 mm wide; load-bearing capacity per pair: 14,000 kg; ramp storage compartment between the beams. Approval: Contour marking with reflective strips according to ECE R 048; white at the sides and red at the rear.

Koşul: yeni, makine/araç numarası: 535119ca408d3bd5a8e74be51, boş ağırlık: 6 kg, azami yük ağırlığı: 11 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-loader Trailer Welded steel construction Turntable with heavy-duty ball bearing slewing ring, tool box recessed in the turntable frame Foldable rear support Wheel chocks with holders Gbodpfx Aoi Ri N Hefrel Aluminium side underrun protection Half-shell mudguards on 1st axle, quarter-shell mudguards in front of and behind the 2nd axle with anti-spray mudflaps behind each axle 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with padlock (lock not included) Extendable deck widenings to 3,000 mm (not in rear chamfer) (the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm), central compartment for timber planks on the loading area, 70 mm planks for widening to 3,000 mm Lashing Points Low-loader 3 pairs of 10 t lashing points integrated in the floor at the front 6 pairs of lashing mushrooms, 10 t each, recessed at the top and side in the outer frame 1 x after gooseneck, remaining distributed in between, spacing not greater than 1,200 mm 1 x rear chamfer 5 pairs of ring lashing eyes in the outer frame, 5 t each (instead of stake pockets) Trailer Drawbar Assembly - Turntable trailer Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum brake axles Axles/chassis laser measured to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings Wheels and Tyres 235 / 75 R 17.5 As per manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connecting cable Note: This trailer may only be towed by tractor units that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side markers 2 white/red lane marker lights at the rear 2 white position lights at the front 1 revolving beacon with holder, switchable via parking light (beacon removable) 2 pairs of warning signs, double LED illuminated, extendable to 3,000 mm 2 x 7-pin interchange-proof plugs at the front, with connecting cable Deck Front section with steel floor, then 70 mm softwood floor, wheel arch areas with steel/chequer plate covering Rear chamfer with 70 mm softwood floor Low-loading area incl. rear chamfer 8,200 mm Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional foldable ramp lock at the bottom (prevents side slippage of ramps, not in combination with hydraulic side ramp adjustment) Wood covering Assisted by spring lifters Operating Notes Special permit is required for 10,000 kg axle load. Permit must be applied for individually in each federal state; the legislator is not obliged to guarantee a permit for 20 t GVW. Customer's responsibility. The specified total weight is technically possible, depending on the load, the permissible gross weight may not be achievable due to axle/support/saddle load restrictions. Registration / Plates Country of registration: Germany Test approval according to EC 2007/46 24/7-Service Hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, white on sides and red at rear Warning sign according to ECE - 70 Paintwork Frame: DB Novagrau Ramps: hot-dip galvanised Note: Archive photos!

Koşul: yeni, makine/araç numarası: 2b58968e34fac93b429a256e9, boş ağırlık: 5 kg, azami yük ağırlığı: 12 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis – Low-bed Trailer - Steel welded construction - Turntable with heavy-duty ball race, storage box recessed in turntable front section - Foldable rear support - Wheel chocks with holders - Aluminum side underrun protection - Full-width rear spray flap - Quarter shell mudguards in front of 1st axle - Spare wheel carrier for 1 spare wheel, with attachment kit - Spare wheel, same brand and specification as base tires, steel rim - Plastic toolbox with insert shelf, dimensions: width=620 / height=360 / depth=440 mm, lockable with a padlock (lock not included) Tie-down Points Low-bed - 3 pairs of lashing points, each rated for 10 tons, integrated into the floor at the front - 6 pairs of lashing studs, inserted in the upper and side outer frame, each for 10 tons; 1 in the gooseneck area, remaining distributed with max spacing of 1200 mm; 1 at rear incline - 5 pairs of ring-type lashing eyes recessed into the outer frame, each rated for 5 tons (convertible to stake pockets) Trailer Drawbar/Turntable - Drawbar with tested 40 mm towing eye Axles & Suspension - SAF drum brake axles - Axles/chassis laser aligned to reduce tire wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber bushings Wheels and Tires - 235/75 R17.5 - Tire brand at manufacturer’s discretion - Steel twin-mounted rims, factory silver Braking System - 2-line air brake system - Spring-loaded parking brake - 2 reverse-polarity-proof coupling heads at the front, with connecting lines to the towing vehicle - ABS and ALB, with ABS plug at the front, connection cable, voltage converter for 12/24 volt operation Note: A 7-pin 12V socket on the tractor/hauler is required (required for electrics with voltage converter!) Warning: The trailer may only be towed by vehicles that guarantee the effectiveness of the ABS! Electrics - 24 volts, multi-chamber lighting, yellow LED side markers - 2 white/red track lights at the rear - 2 white position lights at the front - Additional LED work light at the rear, operated via reverse gear - 2 x 7-pin reverse-polarity-proof plugs at the front, with connecting cable - 1 x 7-pin agricultural plug - Voltage converter 12/24 volt (for electrics only, not for ABS/EBS) Floor - Steel floor in the front area, followed by 70 mm softwood floor - In the wheel arch area: steel / chequer plate covering - Rear incline with 70 mm softwood floor - Low-bed platform including rear incline: 8,200 mm Gbedpfoi Ri Nxox Afrsl Access Ramps - Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable - Wooden overlay - Spring-lift assisted Operating Instructions - A special permit is required for 10,000 kg axle load. The permit must be applied for separately in each federal state; approval for 20-ton GVW is at the discretion of the authorities – customer’s responsibility. Country of Registration / License Plates - Registration country: Germany - With Dekra inspection and expert's report (according to §13 EC-FGV) - 24/7 service hotline - Prepared for two-line license plate holder - Reflective contour marking as per ECE R 048, white on the sides and red at the rear Paintwork - Frame: DB 7350 Novagrau - 10-year anti-perforation warranty - Drawbar: galvanized or painted black, depending on manufacturer's choice - Ramps: hot-dip galvanized Note: Archive images!

Koşul: yeni, makine/araç numarası: 6d88bda3a1ee2464a81b34f36, boş ağırlık: 4 kg, azami yük ağırlığı: 13 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction, with slight central pre-camber, turntable with heavy-duty slewing ring, wheel chocks with holder, quarter-circle mudguards in front of and behind each axle. Lashing Eyes for Low-Bed Over front axle: 2 pairs of ring lashing eyes at 5t each, front at the gooseneck Low-bed: 4 pairs of lashing eyes, side-mounted in the low-bed at 6t each 5 pairs of lashing eyes at 5t between the longitudinal beams Drawbar / Turntable Trailer Coupling Drawbar with certified 40 mm towing eye, mechanically length-adjustable and lockable in 6 x 100 mm steps (Drawbar length 1,700 - 2,300 mm) Axles & Suspension BPW drum brake axles with 10t axle load each, automatic slack adjusters. Axle endurance braking test rated up to 105 km/h, rear axle manually removable. To remove: release air locking and lower the rear to the ground. Then disconnect the hoses at the rear module, insert the transport bar into one of the rear bushings, and, by gently pressing down and simultaneously pulling back, uncouple the rear (parking brake released). After loading or unloading, move the rear module into place and connect up to the marking. Then raise to driving height and reconnect hoses. Confirm bolt locking (visual check to ensure bolt locks) and test rear functionality. Air suspension with raise/lower valve Wheels and Tyres 235 / 75 R 17.5, from leading brands, steel rims in twin arrangement, factory silver finish Braking System Gedpfsi Ri N Asx Afrebl 2-line air brake system, spring-loaded parking brake, 2 fail-safe coupling heads front, with connecting lines to tractor unit, EBS (Electronic Braking System) with EBS plug front, incl. connection cable. Attention: This trailer may only be towed by tractor vehicles capable of guaranteeing effective ABS operation! Electrics 24-volt system, multi-chamber lights, yellow side LED lighting, 2 white position lights front, 2 white/red lane marker lamps rear, rotating beacon with holder, operated via parking light circuit (beacon removable), 2 pairs of warning plates, double LED illuminated, extendable up to 3,300 mm, removable with plug, 2 x 7-pin fail-safe plugs front with connection cable, 1 x 7-pin agricultural plug, voltage transformer 12/24 volts (for electrical system only, not ABS/EBS) Floor Steel/chequer plate floor on gooseneck, between longitudinal and cross members with perforated plate covering. Axle covers not drivable, extension to 3,000 or 3,300 mm possible. Operating Notes Note! For 10,000 kg axle load, special approval is required. Approval must be requested separately in each German federal state; a commitment for 20t gross weight is not guaranteed by law. Customer risk. Special approval required if overall towing length exceeds 18,750 mm. Observe country-specific registration regulations. The specified gross vehicle weight is technically feasible; depending on the load, gross weight may not be achievable while adhering to permissible axle, support, and fifth-wheel loads. Observe BO-circle regulations!!! Registration / Plates Registration country: Germany, with Dekra inspection and report (according to §13 EC - FGV), prepared for single-line number plate holder, warning plate according to ECE-70, contour marking with reflective tape according to ECE R 048 Paintwork Front frame hot-dip galvanized with passivation, rear frame RAL9006 silver, drawbar KTL black Note: Archive images!

Koşul: ikinci el, boş ağırlık: 4.150 kg, azami yük ağırlığı: 15.850 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2022, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.020 mm, yükleme alanı hacmi: 17 m³, toplam uzunluk: 7.000 mm, süspansiyon: çelik, lastik boyutu: 235/75 17,5, lastik durumu: 80 yüzde, renk: gümüş, Üretim yılı: 2022, ön lastik ölçüsü: 235/75 17,5, arka lastik boyutu: 235/75 17,5, şoför kabini: gündüz kabini, emisyon sınıfı: hiçbiri, Donanım: ABS, kamyon kaydı, Reference number for inquiries: 410401 Fliegl, ZPS200K * Year of manufacture: 2022 * ABS, anti-lock braking system * Air connection coupling head (red + yellow) Gbodpfjy D E Ubex Afrsl * Connection plug 2x7-pin * Storage box / toolbox * Galvanized * Pneumatic locking * Suspension: leaf * Gross weight: 20,000 kg * Unladen weight: 4,150 kg * Payload: 15,850 kg * Permissible gross weight: 20,000 kg * Axle manufacturer: SAF * Tire condition, 1st axle: 80%|80% -- 80%|80% – Tire size: 235/75 R17.5 * Tire condition, 2nd axle: 80%|80% -- 80%|80% – Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Internal dimensions: L = 7,000 mm, W = 2,500 mm, H = 1,020 mm * Internal volume*: 18 m² * Pallet spaces: 17 * Suitable for roll-off and skip containers * Roll-off containers 5,000–7,000 mm length * Lowerable drawbar * Compartment for loading ramps * External dimensions * Ride height: 1,020 mm * Platform length approx. 7,000 mm * Pneumatic locking * Air connection: duomatic Liability disclaimer: Subject to change, prior sale, and errors excepted. You can find more pictures and videos on our website. Our comprehensive service includes e.g.: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing * Handling of all (export) documentation * Ordering of export / customs license plates * Vehicle reconditioning: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV approvals, registration service * Transfer of commercial vehicles Contact our trained professional staff—we are happy to advise you.

Koşul: ikinci el, boş ağırlık: 4.150 kg, azami yük ağırlığı: 15.850 kg, toplam ağırlık: 20.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2022, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.500 mm, yükleme alanı yüksekliği: 1.020 mm, yükleme alanı hacmi: 17 m³, toplam uzunluk: 7.000 mm, süspansiyon: çelik, lastik boyutu: 235/75 17,5, lastik durumu: 80 yüzde, renk: gümüş, Üretim yılı: 2022, ön lastik ölçüsü: 235/75 17,5, arka lastik boyutu: 235/75 17,5, şoför kabini: gündüz kabini, emisyon sınıfı: hiçbiri, Donanım: ABS, kamyon kaydı, Reference number for inquiries: 41040 Fliegl, ZPS200K * Year of manufacture: 2022 * ABS (Anti-lock Braking System) * Air connection coupling head (red + yellow) * Connection plug 2x7-pin * Storage/toolbox * Galvanized * Pneumatic locking system * Spring suspension (leaf springs) * Gross vehicle weight: 20,000 kg * Unladen weight: 4,150 kg * Payload: 15,850 kg * Permissible total weight: 20,000 kg * Axle manufacturer: SAF% Gedpfx Afjy D E Uhsrjbl * Tire condition 1st axle: 80%|80% -- 80%|80%, Tire size: 235/75 R17.5 * Tire condition 2nd axle: 80%|80% -- 80%|80%, Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Internal dimensions: L=7,000 mm, W=2,500 mm, H=1,020 mm * Internal volume*: 18 m² * Pallet spaces: 17 * Suitable for roll-off and skip containers * Roll-off containers 5,000–7,000 mm length * Lowerable drawbar * Storage compartment for drive-on ramps * External dimensions * Ride height: 1,020 mm * Platform length: approx. 7,000 mm * Pneumatic locking * Duomatic air coupling Liability disclaimer: Subject to alterations, prior sale and errors excepted. You will find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing solutions * Processing of all (export) documents * Ordering export and customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and cargo securing * TÜV certifications, registration service * Transfer of commercial vehicles Please contact our trained specialists for advice – we are happy to help.

Koşul: ikinci el, makine/araç numarası: WFDFLT22001011091, boş ağırlık: 5.340 kg, azami yük ağırlığı: 12.660 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 09/2021, lastik boyutu: 235/75 r17,5, Üretim yılı: 2021, Further information Chassis central axle trailer Fine-grain steel welded construction Type TPS 200 (special permit required) Gear support leg at front Rear support can be folded Wheel chocks with holders Side underrun protection made of aluminium Full-width rear mud flaps Mud flaps in front of each axle and anti-spray mud flaps behind each axle 1x spare wheel holder for 1 spare wheel, with wheel fixing kit 1x spare wheel, same make as standard tires, steel rim 1x stainless steel toolbox, w=600/h=400/d=500 mm, with polished lockable door Lashing points low loader 5 pairs of stake pockets recessed in the outer frame, inside 70 x 40 mm, (convertible to 5t lashing rings, not included) 7 pairs of lashing mushrooms recessed on the top and side of the outer frame, each rated at 10t 2 pairs of folding lashing rings additionally recessed in the low bed area, each 10t (1 pair at the front and 1 at the rear slope) Drawbar system for central axle trailer Drawbar with certified 50 mm towing eye Axles + Suspension SAF drum brake axles Laser-measured axles/chassis to reduce tire wear and fuel consumption Axle spacing 1810 mm (then 10t axle load technically permitted) Air suspension Braking system 2-line compressed air brake system, color-coded lines for easy servicing. Spring-loaded parking brake Gbsdpfsp N Dgujx Afrel Duomatic coupling at front, with connecting line to tractor unit EBS electronic brake system with EBS connector at the front, including connection cable Note: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS! With lift & lower valve Vehicle – driving stability system Axle load detection via EBS CAN bus signal, for display in the cabin, truck needs appropriate preparation, not installed in the truck (not a calibrated scale) Wheels and tires 235/75 R17.5, make: Fulda Steel rims, factory silver Electrics 24 volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 x 15-pin connector at front including connecting cable 1 additional LED work light at rear, switched via reverse light 1x LED beacon with bracket, powered by position light (removable beacon) Floor Subsequently finished with 70 mm softwood floor, wheel arch area with steel/chequer plate cover Rear incline with Mega Grip surface made from serrated grating Low bed area including rear incline 6500 mm Front wall / corner stanchions 25 mm aluminium hollow profile, 400 mm high, detachable Loading ramps Steel ramps 3600 mm long, 750 mm wide, split by cable tensioning, laterally adjustable Ramp displacement: min. spacing approx. 600 mm, max. outside width approx. 2880 mm Ramp surface with Mega Grip made from serrated grating Operated hydraulically by separate electrohydraulic unit, mounted in steel box, controlling located on right-hand side. Note: NATO socket with connection cable on truck required. Connection cable must not be connected while driving! Hydraulic lateral displacement of ramps, individually controllable (only in conjunction with hydraulic ramp actuation)

Koşul: yeni, makine/araç numarası: 8df1ead53cc82aeb51e50a37d, boş ağırlık: 4 kg, azami yük ağırlığı: 13.880 kg, toplam ağırlık: 18 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: 235 / 75 r 17,5, Further information Chassis Turntable Skip Loader Fine-grain steel welded construction Container locking system: - 2 pairs of locking hooks recessed into the floor - Pneumatic operation The container locking system is designed as an internal 2-point mechanism; locking of skip containers with internal bars is not possible (designed for the transport of roll-off containers with subframes according to DIN 30722). Note! At the start of the roller trough at the front, the container must be pushed on completely flat! Longitudinal guide rails, laterally adjustable and removable, rails approx. 115 mm high Turntable with heavy-duty ball bearing slewing ring 8 pairs of lashing mushrooms recessed into the upper and side parts of the outer frame, each rated at 5 t 7 pairs of stake pockets recessed into the outer frame, internal dimensions 70 x 40 mm (convertible to 5 t lashing rings, not included) 2 wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Quarter section mudguards according to EC standards With anti-spray mudflaps to EC Directive Drawbar arrangement for turntable trailers Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Gbodpfx Asi Ri Nusfrsl Wheels and Tires 235 / 75 R 17.5 Manufacturer’s choice Steel wheels in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 interchangeable coupling heads at front, with connecting lines to towing vehicle, ABS and ALB, with ABS socket at front, with connection cable Attention: The trailer may only be towed by tractors that ensure proper ABS function! Electrics 24 Volt, multi-chamber tail lights, yellow LED side marker lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin interchangeable plugs at front, with connecting cable Floor Steel floor Container roller trough at front, recessed in floor, for roll-off containers 5,000 – 7,000 mm length Note: Minor floor deformation due to welding distortion possible! Loading ramps Lockable storage space for loading ramps beneath bed Operating instructions For 10,000 kg axle loads, a special permit is required. The permit must be applied for separately in each federal state; there is no guarantee from the legislator for 20 t permissible total weight. Customer’s risk. The specified total weight is technically possible; depending on the type of load, the permissible total weight may not be achievable while adhering to axle/support and kingpin loads (impaired driving and tracking possible from poor load distribution). Country of registration / Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 Service Hotline Prepared for one-line number plate holder Contour marking with reflective tape to ECE R 048, white lateral and red rear Warning panel according to ECE-70 Paintwork Frame DB 7350 Nova Grey 15-year warranty against rust-through Note: Floor deformation from hot-dip galvanization possible! Drawbar KTL black Important: Archive photos!

Koşul: yeni, makine/araç numarası: a198a229880f94ce822d671fc, boş ağırlık: 3 kg, azami yük ağırlığı: 16 kg, toplam ağırlık: 20 kg, dingil konfigürasyonu: 1 dingil, lastik boyutu: 385 / 65 r 22,5, Further information Chassis Semi-trailer Container Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" kingpin, 2 pairs of removable guide rollers 4 container locks with robust outriggers on 20' basis for swap bodies 7.45 and 7.82 m 24 t, 2-speed landing gear, single-sided operation, with straight base, without shift compensation, unhitching under load only possible with even distribution! 2 wheel chocks with brackets Side underrun protection in aluminium Rear underrun protection galvanized steel, Half-shell mudguards with anti-spray flaps Axle & Suspension SAF disc brake axle, with 430 mm disc diameter, Air suspension with lift & lower valve, with hold function for raising/lowering Wheels and Tires 385 / 65 R 22.5 Gjdpji Rixnjfx Afrebl from leading manufacturers Steel rims, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 confusion-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! Electrics 24 Volts, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane position lights at rear 2 x 7-pin confusion-proof sockets at the front, without connecting cable Approval / Plates Country of approval: Germany with Dekra inspection and report (according to §13 EC - FGV) prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Warning sign according to ECE - 70 Paintwork Frame DB nova grey Support legs black coated Attention: Archive images!

Koşul: ikinci el, toplam ağırlık: 18.000 kg, ilk tescil: 09/2019, yükleme alanı uzunluğu: 7.000 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 3.000 mm, - Çift lastik donanımı - Mega, - 3 metre iç yükseklik - Yan yükleme Godpfx Aexxxltofrobl

Koşul: iyi (kullanılmış), Üretim yılı: 1989, Bükme makinesi, katlama makinesi, döner bükme makinesi, kalıp bükme makinesi -Üretici: zts, katlama makinesi tipi XONM.2000/2A-4 -Sürüş: hidrolik -maksimum. Çalışma genişliği: 2000 mm -maksimum. Sac kalınlığı: 2 mm -Bağlı yük: 2,2 kW Gsdpfx Asmiqm Iofrsbl -Ölçüler: Bükme makinesi 2850/1100/H1400 mm / Ünite 720/540/H760 mm -Toplam ağırlık: 2160 kg

Koşul: yeni gibi (kullanılmış), Ambalaj hattı, shrink torbaları için. Hat şu ekipmanlardan oluşmaktadır: 1. Vakum paketleme makinesi MULTIVAC C 700 Kabin boyutları (UxGxY): 1060x440x200 mm Makine boyutları (UxGxY): 1270x850x1150 mm Gsdpfx Aoy Iv Iasfrjbl Mühürleme çubuğu uzunluğu: 1 x 1060 mm Makine çevrim süresi: 15-40 sn. Voltaj: 400 V-3-50 Hz Güç: 7,0 kW ; 22 A 2. HENKELMAN DIPTANK 200 A Konveyör bantlı otomatik platform Dijital sıcaklık kontrolü Paslanmaz çelik gövde Maksimum yükleme kapasitesi: 30 kg Daldırma derinliği: 200 mm Daldırma süresi: 3-5 saniye (ayarlanabilir) Çevrim süresi: 22 saniye Basınçlı hava tüketimi: 50 l/dak 6 bar Otomatik kontrollü su beslemesi Su tahliyesi Otomatik su seviyesi kontrolü Dahili ölçek koruması Suyu önceden ısıtmak için zamanlayıcı anahtarı

Koşul: yeni, Fonksiyonellik: tamamen fonksiyonel, güç: 110 kW (149,56 bg), yakıt türü: elektrikli, renk: diğer, toplam ağırlık: 21.360 kg, Üretim yılı: 2026, Backenbrecher zerkleinern je nach Kapazität in der Regel 200 bis 300 Tonnen pro Stunde. Auf Kundenwunsch können auch Backenbrecher mit höherer Kapazität produziert werden. Die Backenbrecher werden hauptsächlich zum Zerkleinern der härtesten Gesteinsarten wie Basalt, Granit und Gabbro eingesetzt. Dank ihrer robusten und langlebigen Backenkonstruktion gehören sie seit Jahren zu den bevorzugten Brechern in der Bergbauindustrie. Durch die Backenspaltverstellung lässt sich das gewünschte Endprodukt und die gewünschte Kapazität optimal einstellen. Die Verstellung erfolgt bequem über Hydraulikzylinder. ALLGEMEINE MERKMALE UND AUSSTATTUNG: - Antrieb über Riemen- und Scheibensystem - Backenplatten aus speziell angefertigtem, hochverschleißfestem Guss-Manganstahl - Exzenterwelle aus Cr-, Ni-, Mo-legiertem, geschmiedetem Stahl - Hydraulische Einstellung der Backenöffnung - Brecherschutz durch Kniehebelplatten bei Überlastung Gbsdpfx Afey Dpl Rjrjl - Alle verschleißexponierten Flächen mit Auskleidungsplatten versehen TECHNISCHE DATEN: • Modell: FABO CLK 1175 • Typ: Primär-Backenbrecher • Einlauföffnung: 1070 x 760 mm • Spaltöffnung: 45-160 mm • Max. Aufgabegröße: 760 mm • Leistung: 200–300 t/h • Motor: Schwerlast-GAMAK, 110 kW • Lager: Schwerlast-SKF-FAG • Gewicht: 21.360 kg • Abmessungen: 2730 x 1698 x 2492 mm • Inklusive Motor und Schutzabdeckungen *Alle unsere Produkte werden sorgfältig hergestellt und verfügen über 1 Jahr Herstellergarantie! *Montage und Bedienerschulung KOSTENLOS! FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE UNS GERNE!

Koşul: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, *Tüm ürünlerimiz özenle üretilmiştir ve 1 yıl garanti kapsamındadır! *Kurulum ve Operatör Eğitimi ÜCRETSİZ Konik kırıcı ürün grubu özellikle en sert malzemeler için tasarlanmıştır, konik kırıcılar nehir çakılı, bazalt ve granitin yanı sıra madencilik endüstrisindeki aşındırıcı malzemelerin kırılması için en iyi seçeneklerden biridir. Konik kırıcıların çalışma prensibi, malzemeyi sıkıştırarak, tamamen dayanıklı manto ve bir hazne astarı ile kaplı duvarları arasında sıkıştırarak kırmaktır. Uzun ömürlü aşınma parçaları sayesinde diğer kırıcılara göre daha uzun ömürlüdür. Model FABO CC200 Kapasite: 200-250 t/h Maks. Besleme açıklığı: EC 185 mm C 145 mm MC 115 mm M 90 mm MF 75 mm F 50 mm EF 35 mm Motor: 132 kW Kafa çapı: 1100 mm Boyutlar (genişlik * yükseklik): 2520* 2540 mm Havşa Mili Devir/dakika: 750-1200 Ağırlık: 11230 kg * Hidroset Kontrolü * Otomatik Yük Koruması * Pratik deşarj * Yüksek kapasiteli kübik üretim Gbedpfx Afoyxn Utjrel * Yüksek performanslı temassız labirent * Yüksek verimlilik, düşük enerji üretimi ve daha düşük aşınma maliyetleri, uzun servis ömrü ve istenen ince tozlarla yüksek ürün verimi. DAHA FAZLA BİLGİ İÇİN LÜTFEN BİZİ ARAMAKTAN ÇEKİNİZ!!!

Koşul: ikinci el, boş ağırlık: 5.100 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2018, Üretim yılı: 2018, Boş ağırlık: 5100 kg. Web sitemizde mevcut tüm araçların genel bir görünümünü bulabilirsiniz. Finansmana mı ihtiyacınız var? Bireysel finansman çözümleri, tam hizmet sözleşmeleri ve telematik hizmetler sunuyoruz. Size kişisel olarak danışmanlık yapmaktan memnuniyet duyarız. Gbodpfsy Rcdtjx Afrel

Koşul: ikinci el, boş ağırlık: 5.100 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 06/2018, Üretim yılı: 2018, Boş ağırlık: 5100 kg. Web sitemizde mevcut tüm araçların genel bir görünümünü bulabilirsiniz. Finansmana mı ihtiyacınız var? Bireysel finansman çözümleri, tam hizmet sözleşmeleri ve telematik hizmetler sunuyoruz. Size kişisel olarak danışmanlık yapmaktan memnuniyet duyarız. Gjdoy Rcdmepfx Afrjbl

Koşul: yeni, Yüksek kaliteli, tanınmış Alman markası KSB'nin ETANORM SYT ETNY065-040-200 model santrifüj pompası satılıktır. Cihaz, KSB'nin orijinal ambalajında sıfır ve depoda bekletilmiş olup, endüstriyel su tesisatları ile ısıtma ve soğutma sistemlerinde kullanım için idealdir. TEKNİK BİLGİLER Üretici: KSB Model: ETANORM SYT ETNY065-040-200 Kapasite (Q): 25,6 m³/h Basma Yüksekliği (H): 46 m Devir Hızı: 2950 d/dak Çark Çapı: 187 mm Gövde Malzemesi: EN GJS 400-15 Üretim Yılı: 2024 Flanşlı bağlantılar DURUMU Yeni, hiç kullanılmamış, depoda beklemiş Depolamadan kaynaklı minimum izler olabilir Orijinal KSB ambalajında KULLANIM ALANLARI Gbodpfx Afoywu Uqsrol Endüstriyel tesisatlar Su sirkülasyon pompaları HVAC sistemleri Isıtma ve soğutma tesisatları Terfi merkezleri

Koşul: mükemmel (kullanılmış), CATALOG NUMBER 6911 TECHNICAL DATA - Track width: 350 mm - Roller width: 370 mm - Max cutting height: 200 mm Max blade diameter: - Upper shaft: 340 mm - Lower shaft: 300 mm - Blade bore diameter: 80 mm From above: - Ejectors - 2 pressure slip rollers - Pressure unit - 37 kW saw shaft - 2 smooth slip rollers From below: - Infeed table + guide bar - Ejectors - Track - 37 kW saw shaft - Track - 1 outfeed, smooth slip roller - Pneumatically pressed rollers - Max blade diameter: 300 mm - Electric height adjustment of upper body up/down: 1.1 kW - Automatic central lubrication - Electrically adjustable, stepless feed speed regulation: 3 kW - Extraction nozzle diameter: 230 mm, 250 mm - Dimensions (L/W/H): 3000 x 2300 x 1900 mm - Weight: approx. 4500 kg Gbedpfoy Rtaxsx Afrjl ADVANTAGES – Made in Italy – Two-shaft – Used multi-blade saw, very good condition Net price: 168,900 PLN Net price: 40,200 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of major fluctuations, the price may change)

Koşul: mükemmel (kullanılmış), Çok iyi durumda bir TIG kaynak makinesi, L-TEC 200 DC satıyorum. Fiyat 1 adet için verilmiştir. Gbsdpfx Aeud R T Sofrsl

Koşul: ikinci el, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 80796, Makine mükemmel durumdadır, tam olarak çalışır durumdadır, Litvanya'nın Vilnius kentindeki şantiyede sökülmesi gerekmektedir. Satıcı söküm, kamyona yükleme ve teslimat hizmeti sunmaktadır. Gbsdsvddplopfx Afrsl

Koşul: iyi (kullanılmış), Üretim yılı: 1989, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 250 t, masa genişliği: 1.120 mm, masa uzunluğu: 800 mm, toplam uzunluk: 25.800 mm, toplam genişlik: 13.500 mm, toplam yükseklik: 29.750 mm, toplam ağırlık: 12.800 kg, yükseklik ayar tipi: mekanik, vuruş ayarı: 140 mm, Donanım: dokümantasyon / kılavuz, Eksantrik Pres LE 250C. Üretim yılı: 1989 (ZTS - SLOVAKYA). Orijinal şemaya göre yeni elektrik kontrol kabini, merkezi yağlama pompası. Maksimum pres gücü: 250 ton. Strok: 30-140 mm. Gedpfx Astq Eqxofrobl Dakikadaki maksimum vuruş sayısı: 45. Kaydırıcı hareketi: 110 mm. Kaydırıcı ile masa arasındaki maksimum mesafe: 450 mm. Kaydırıcı tespit yüzeyi: 800 x 475 mm. Masa tespit yüzeyi: 1120 x 800 mm. Motor gücü: 20 kW. Boyutlar (Yükseklik x Genişlik x Uzunluk): 2975 x 1350 x 2580 mm. Ağırlık: 12.800 kg.

Koşul: ikinci el, boş ağırlık: 7.375 kg, azami yük ağırlığı: 27.625 kg, toplam ağırlık: 35.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2012, yükleme alanı uzunluğu: 13.650 mm, süspansiyon: hava, lastik boyutu: 385/65R22,5 160J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 385/65R22,5 160J, arka lastik boyutu: 385/65R22,5 160J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, Stake pockets, -- typographical errors, mistakes, and changes reserved, sample images --, More data at: !, More details: ! Gbsdpfx Ajy Nivtsfrol

Koşul: ikinci el, boş ağırlık: 5.300 kg, azami yük ağırlığı: 12.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2010, yükleme alanı uzunluğu: 7.300 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 2.900 mm, yükleme alanı hacmi: 52 m³, süspansiyon: hava, lastik boyutu: 235/75R17,5 ---/141J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 ---/141J, arka lastik boyutu: 235/75R17,5 ---/141J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Lashing eyes, -- Errors, omissions, and changes excepted, sample images --, More data at: !, More details: ! Godpfx Afoy Niuierobl

Koşul: ikinci el, boş ağırlık: 4.300 kg, azami yük ağırlığı: 13.700 kg, toplam ağırlık: 18.000 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 02/2019, yükleme alanı uzunluğu: 7.200 mm, süspansiyon: hava, lastik boyutu: 445/45 R19,5 160J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 445/45 R19,5 160J, arka lastik boyutu: 445/45 R19,5 160J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, -- Druckfehler, Irrtümer und Änderungen vorbehalten, Musterbilder -- Weitere Informationen unter: !, Mehr Details: ! Gbjdpfxoy Nitre Afrsl

Koşul: ikinci el, boş ağırlık: 6.520 kg, azami yük ağırlığı: 23.480 kg, toplam ağırlık: 30.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 05/2019, yükleme alanı uzunluğu: 8.610 mm, süspansiyon: hava, lastik boyutu: 235/75R17,5 ---/140J, renk: diğer, vites türü: diğer, ön lastik ölçüsü: 235/75R17,5 ---/140J, arka lastik boyutu: 235/75R17,5 ---/140J, şoför kabini: diğer, emisyon sınıfı: hiçbiri, Donanım: ABS, basınçlı hava freni, Loading platform length (low bed) approx. 6.50 m, total loading platform length approx. 8.60 m, loading height approx. 900 mm. Gjdpfsy Izthox Afrsbl Vehicle is being offered on behalf of a bank. -- Subject to typographical errors, mistakes, and modifications. Sample images -- More data at: ! More details: !