Kullanılmış Ağaç Dikmek satın al (777)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Uygunluk
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Makine üreticisi
- Üretici Z'den A'ya
- Makine üreticisi
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Uygunluk
- Uygunluk
Küçük ilan
Neckartailfingen
2.332 km
Parçalayıcı, ağaç parçalama makinesi
mütekMGZ 1030 - 22 kW
Ara
Durumu: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2025, çalışma saatleri: 55 h, Machine with Special Rotor
Available immediately
Advantages:
+ Special rotor with reduced knife protrusion, suitable for hard and soft materials
+ Motor: 22 kW
+ Efficient square knives
*For pallets: up to a maximum of 10 pallets per hour *Dependent on screen size and material. Significantly higher throughput possible with smaller wood offcuts.
Motor: 22 kW; 400 V - 50 Hz - 3ph
Screen: 15/20 mm or as agreed (10 to 40 mm available)
Hydraulically operated pusher
Current screen perforation (15/20 mm) *can be exchanged
Gusdpex Af Rdofx Abtja
Extraction port Ø 200 mm
Feed opening 1000x1000 mm
Dimensions: 2000x1800x1645 mm
Example image above: equipment color may vary
Weight: 1920 kg
Standard equipment includes:
- Control cabinet with PLC control
- Automatic star/delta start
- High-speed hydraulics
- Automatic shut-off when rotor idles
- Speed 70–90 rpm for high throughput
- Cycle control to avoid idle times
- Performance-enhancing step control for the hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE compliant
The following options are available at extra cost:
- Raise shredder by 30 cm (ready for conveyor belt) + €2,480 net
- Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net
- Over-belt magnet + €5,980 net
- Control for conveyor belt and over-belt magnet + €2,750 net
(Start and stop synchronized with shredder)
- Enlarged feed hopper 1500x1500 mm + €3,480 net
Raw material requirements:
- Moisture content (atro) must be below 25%
- Material feed must be free from metals and mineral impurities. Otherwise, tool damage and/or increased wear can result.
Küçük ilan
Poznań
2.052 km
Ağaç parçalayıcı
PelettoZUBR-500
Ara
Durumu: yeni, Üretim yılı: 2025, Fonksiyonellik: tamamen fonksiyonel, ÖZEL TEKLİF! STOKTAN SATIŞ! Yeni, garantili
MT-500 çekiçli değirmen, ağaç yongası, talaş ve tahıl atıklarının parçalanması için tasarlanmıştır. Çekiçli değirmenlerin temelinde, çarpma elemanları (çekiç ve tokmaklar) ile donatılmış bir rotor bulunur.
MT-500 Çekiçli Değirmen – başlıca avantajlar:
- Malzemenin parçalanma derecesinin ayarlanabilmesi;
Gujdpfx Aowi Itkjbtsa
- Kompakt boyutları sayesinde küçük alanlara bile kurulabilir;
- Yüksek verimle düşük enerji tüketimi;
- Özel bir temel inşa etmeye gerek yok;
- Gerekirse elek ve çekiçlerin hızlı değişimi;
- Siklon ile donatılabilme imkânı;
- Güvenilirlik ve kullanımda güvenlik;
Siklon opsiyonu +940 EUR
Avrupa üretimi, doğrudan üreticiden, garanti, yedek parça temini mümkündür. AB KDV numarası ile net fiyat.
Kendiniz teslim alabilir veya teslimat şartlarını görüşebiliriz. Satın almadan önce makineyi görüp test etme imkânı vardır.
Sorularınız için lütfen iletişime geçin.
Küçük ilan
Rūjiena
2.226 km
Ağaç parçalayıcı
Ara
Durumu: işlem için hazır (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, Satılık: Massey Ferguson 7726 + MUS-MAX WT9XLZ Ağaç Parçalayıcı
Paket fiyatı: 135.000 EUR (KDV hariç)
_____
🚜 Massey Ferguson 7726
• Üretim yılı: 2017
• Motor saati: 8.170
• Fiyat: 60.000 EUR (KDV hariç)
• Güç: 255 hp nominal / 280 hp maksimum
• Ön askı düzeni
• Önden süspansiyonlu aks
• 360° pnömatik süspansiyonlu sürücü koltuğu
• Düzenli bakım
• Motor yağı her 250 saatte bir değiştirildi
• Şanzıman: Dyna-6, 50 km/s
• LS pompa kapasitesi: 200 l/dak
• Mekanik kontrollü 4 çift etkili hidrolik çıkış
• Arka çamurluk kaldırma kontrolleri
• Elektronik askı kontrolü (ELC), 9.950 kg kaldırma kapasitesi
• Kuyruk mili: 540 / 1000 d/dak
• Römork için hava fren sistemi
Guodpfx Aoylv Rzobtsa
_____
🌲 MUS-MAX WT9XLZ Ağaç Parçalayıcı
• Üretim yılı: 2009
• Çalışma saati: 12.170
• Aşınan parçalar düzenli olarak değiştirildi
• Yeni lastikler
• Kuleye montajlı kamera
• Ekstra LED aydınlatma
• Tamamen çalışır durumda – hâlen aktif kullanımda

Şimdi bilgi alın
+44 20 806 810 84
+44 20 806 810 84
Şimdi ilan ver
*ilan başına/ay
Küçük ilan
Dobre
1.992 km
Ağaç parçalayıcı
DoppstadtDZ 750 Kombi
Ara
Durumu: iyi (kullanılmış), Üretim yılı: 2004, çalışma saatleri: 15.660 h, Fonksiyonellik: tamamen fonksiyonel, renk: turuncu, Satılık Doppstadt DZ 750 Kombi yavaş devirli öğütücü + yüksek devirli parçalayıcı bulunmaktadır. Makine kazasızdır.
- Üretim yılı: 12.2004
- Mercedes-Benz dizel motor
- Makine çalışma saatleri: 15660 mth
Gjdpfsygr Tnox Abtsua
- Ağırlık: 46 ton
- Manyetik separatör
- Farklı öğütücü eleklerin kullanımı mümkün
- Makine bakımdan geçirilmiştir
- Lastik durumu: %70
- Lastik ebatı: 385/65R22.5
- Kolay kullanım
Makine sürekli kullanımdadır, iletişime geçiniz.
Küçük ilan
Bünde
2.522 km
Ağaç kütüğü yarı römorku
DOLLH3L - 14XL Holzrungen/ExTe/teleskop/Lift-Lenkach
Ara
Durumu: kullanılmış, azami yük ağırlığı: 35.870 kg, toplam ağırlık: 42.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2021, bir sonraki muayene (TÜV): 03/2027, yükleme alanı uzunluğu: 14.000 mm, Üretim yılı: 2021, Donanım: ABS, DOLL Tip H3L ? 14XL 3 dingilli tomruk taşıma yarı römorku, 3,5 m açılabilir teleskopik özelliğe sahip ve azami toplam uzunluğu 12.950 mm, iskelet tipi platform, 6x ExTe çelik payanda gövdesi Tip 144-S ile Ecco-Steal kare takozlar, şase üzerinde çeşitli kayış bağlama tertibatları, odun taşımada mümkün yükleme uzunlukları: 2x 6m, 2x 5m, 3x 4m, 3x 3m ve 14m'ye kadar uzun tomruk, SAF akslar 3x 9.000 kg havalı süspansiyonlu; kaldırma ve alçaltma fonksiyonlu, ABS, EBS'li disk frenler, 1. aks kaldırılabilir, son aks takipli döner, WABCO fren sistemi ve havalı süspansiyon için WABCO kontrol kutusu "SmartBoard", yük manometresi, kilometre sayacı vs., plastik alet sandığı sol arka yan, LED arka lambalar ve LED çalışma lambaları, 385/65 R 22,5 // 6 adet lastik, teknik olarak mümkün toplam ağırlık 42.000 kg, boş ağırlık 6.130 kg, 1. el, iyi genel durum, Alman taşıt ve Alman evraklı! Satış sadece ticari müşterilere! Tüm bilgiler garanti verilmeden sunulmuştur! Hatalar ve ara satışlar mümkündür!
Guedpeyqcbqofx Abtsa
Daha fazla ikinci el makine keşfedin
Küçük ilan
Izdebnik
1.722 km
Ağaç parçalayıcı
SPOERRIRĘBAK
Ara
Durumu: yeni gibi (kullanılmış), motor gücü 22kW
şaft genişliği 410mm
Gjdpfx Abjx Sycietjua
tahrikli çekme makaraları
30mm ve 15mm elekler
giriş genişliği 430mm
Küçük ilan
Mirkovci
1.521 km
Ağaç tornalama maki̇nesi̇ / torna
ELIO VALERI copy latheVALERI 4M/65 E
Ara
Durumu: mükemmel (kullanılmış), Model: 4M/65E
Durum: Çok iyi
Boyutlar: 80,00 (Y) x 60,00 (G) x 120,00 (U) inç
Ek Açıklama:
- Otomatik kopya torna tezgahı
Godpfsxz Tfajx Abtjua
- Kürek, bel, sap, silah dipçiği, balta, ayak, kriket sopası vb. üretimi için.
- Aynı anda 4 parça işler.
- Freze (zımpara aparatı yok)
- Slayt üzerinde hız ayarı.
- Sorunsuz çalışıyor
Küçük ilan
Mediniai Strėvininkai
1.942 km
Ağaç parçalayıcı
OSMEKA
Ara
Durumu: iyi (kullanılmış), 380V
22kW
Gusdpfx Ajydf Dbebtoa
Küçük ilan
Kecskemét
1.541 km
Ağaç işleme makinesi
RandekSPL 728
Ara
Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2005, Fonksiyonellik: tamamen fonksiyonel, RANDEK DÖNER ÇAPRAZ KESİM TESTERE
Gujdpfxjvryhgs Abtea
Küçük ilan
Petershagen
2.512 km
Ağaç kütüğü yarı römorku
PAVIC3-Achs Plattform-Auflieger/Leergew. ca. 7,1t
Ara
Durumu: yeni, azami yük ağırlığı: 32.900 kg, toplam ağırlık: 40.000 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 13.510 mm, yükleme alanı genişliği: 2.450 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, PAVIC OptiPa PRSH 27 flatbed semi-trailer for the transport of timber and long materials.
* Chassis length approx. 13,510 mm (front frame to front frame)
* Chassis width approx. 2,540 mm (outer frame to outer frame)
* Ride height unladen approx. 1,400 mm at a fifth wheel height of 1,200 mm
* Fifth wheel load max. approx. 16,000 kg
* Front overhang (kingpin to front edge of front frame) 1,550 mm
* 2" kingpin, SAE-standard, replaceable from below
* Spare wheel holder for 1 spare wheel
* 16 stake pockets recessed in the outer frame
* 8 pockets for stanchion storage, distributed centrally along the entire length
* Front bulkhead approx. 2,500 mm high, corners angled with sheet metal cladding
* Steel floor, 4/6 mm checker plate covering
* Outer frame with rounded edges and lashing holes approx. every 500 mm
* First axle lift, automatic function, with starting aid
* Axle spacing approx. 1,310/1,310 mm
* Premium tyres 385/65 R 22.5
* EBS brake system with Roll Stability Program
* Smartboard/TIM/Info center, in addition to the hand & service valve
* LED lighting system
* LED work lights
* 2x plastic toolboxes
For further information, please feel free to contact us.
Gujdovw Hnwopfx Abtea
Küçük ilan
Burghaun
2.382 km
Westtech Woodcracker C350 ağaç kesme ataçmanı / OQ70/55 / DEMO 2024
WesttechWoodcracker C350 Fällgreifer / OQ70/55 / DEMO 2024
Ara
Üretim yılı: 2024, Durumu: kullanılmış, For inquiries regarding the attachment, please contact Mr. Herden (by phone) for assistance.
Westtech Woodcracker C350 Felling Grapple / incl. collection grapple / incl. tiltator / incl. autospeed function / incl. electrohydraulic switching / in stock & immediately available / Year of manufacture: 2024 / DEMO unit / very good condition
Price: €36,990.00 net / €44,018.10 gross
Cutting diameter softwood (mm): 400
Cutting diameter hardwood (mm): 350
Grapple opening (mm): 1,430
Shear opening (mm): 700
Own weight (base – full equipment) (kg): 1,150 – 1,620
Recommended main circuit flow (l/min): 70 – 150
Recommended operating pressure (bar): 280
Recommended auxiliary circuit flow (l/min): 45–60
Carrier vehicle operating weight (t): 14 – 20
Equipment features:
- Collection grapple
- Autospeed function
- Endless rotating tiltator
- Electrohydraulic switching between collection grapple and tiltator
- OilQuick OQ 70/55 adapter plate
Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available.
Our warehouse stocks a very large selection of various Westtech products, all immediately available!
Mr. Herden (Phone) will be happy to assist you.
Upon request, we are also pleased to provide you with a financing offer.
We are an official Westtech sales and service partner.
We are an official OilQuick sales and service partner.
We are an official Holp sales and service partner.
We are an official Gierking GMT sales and service partner.
We are an official Weber MT sales and service partner.
We are an official DMS sales and service partner.
We are an official Seppi M. sales and service partner.
We are an official Magni telehandler sales and service partner.
We are an official JCB construction machinery sales and service partner.
We are an official Mercedes-Benz sales and service partner.
Godpoyltvhjfx Abtjua
We are an official Iveco sales and service partner.
Moreover, with 800 commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany.
We supply the complete Westtech range!
Subject to errors and prior sale!
Internal no.: 241097
= Further Information =
New: No
Part suitable for: intended use forestry
Please contact Marius Herden for further information.
Küçük ilan
Kuchl
2.021 km
Ağaç torna makinesi / torna tezgahı
MIDI2 Plus SET
Ara
Durumu: yeni gibi (kullanılmış), DEMONSTRATION MACHINE
For sale is a demonstration machine: MIDI2 Plus wood lathe with a center height of 178 mm, including PRO DDMIDI-105 machine stand!
The lathe was only used for a short period for demonstration purposes at Hödnerhof, thus it can be described as as-new with full warranty/guarantee.
Technical data:
- Center height approx. 178 mm / swing over bed 355 mm
- Distance between centers approx. 400 mm (extendable with optionally available bed extensions)
- Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm
- Spindle thread M33 x 3.5 (taper MK2) with ASR (Euro) anti unscrewing groove*
- Tailstock with interchangeable quill 100 mm MK2, trapezoidal thread and measuring scale!
(Optional: interchangeable quill with ER25 collet system for drilling)
- Motor 1 HP (230 V) with high-quality frequency inverter
Gusdpfx Absu Szlzotsa
- Weight approx. 53 kg
The machine is located in Kuchl A-5431. Subject to prior sale!
(No shipping possible)
Related terms: wood lathe, turning machine, lathe, turning, woodturning, lathe tools, machine
Reference: DDMIDI2-PLUS-VH
Küçük ilan
Oppenau
2.406 km
Ağaç kütüğü yarı römorku
DOLL3-Achs-Sattelauflieger LOGO 10
Ara
Durumu: yeni, azami yük ağırlığı: 34.720 kg, toplam ağırlık: 39.500 kg, dingil konfigürasyonu: 3 dingil, yükleme alanı uzunluğu: 9.195 mm, toplam genişlik: 2.550 mm, Üretim yılı: 2026, Donanım: ABS, 3 Dingilli Yarı Römork LOGO 10X
* Çelik düz sac kaplama, kral pimi üzerinde kaynaklı
* Arka çelik baklava sac kaplama, kaynaklı
* Elektronik havalı süspansiyon
* 3 tek dingil, SAF marka, 9 t disk frenli
* 1. dingil kaldırılabilir
* Manuel mekanik destek
* Şasi: 6x ExTe D10 (Poz. 4 çift cepli, Poz. 5 düz kütük cepli ve hızlı kilitli takoz sistemi)
* Kütük yüksükleri: 8x ExTe D7 teleskopik + 4x ExTe D10 teleskopik
* Lastikler: 385/55 R 22,5 çelik jantlı
* EBS fren sistemi
* Üçgen reflektör entegreli LED arka aydınlatma
* 4x LED çalışma lambası (1.800 lümen)
* Alüminyum hava tankı
* Şasiler arasında 3x tutucu koruyucu
* Şasi + takozlar RAL 9011 grafit siyahı
* Tüm montaj parçaları AB normlarına uygun
Gedpforymwzex Abtsua
Resimler orijinalden farklılık gösterebilir. Bilgiler bağlayıcı değildir.
İletişim:
Niclas Lott
Tel.:
Küçük ilan
Ursberg
2.237 km
Ağaç parçalayıcı
die magnetprofisAustragsband Zerkleinerer Magnet Hackgut
Ara
Durumu: yeni, Üretim yılı: 2026, Aluminum Angle Conveyor Belt with Substructure
including adjustable leveling feet and machine feet for leveling uneven floors
Horizontal section: 2,500 mm
Inclined section: 6,000 mm
Bend angle: 45°
Height of horizontal section: 350 mm
Total conveyor length (measured on the floor): 6,750 mm
Gujdpfxjyhzhzj Abtja
Discharge height at conveyor end: 4,500 mm
Design:
Aluminum structural construction
- Reinforced double profile 90 x 45 mm
- Full-surface discharge sheet, 2.0 mm, galvanized
Drive roller + deflection roller made of S235 steel, welded and machined
Ø 100 x 620 mm, crowned and turned, shaft fixed with plummer block bearings.
Drive: shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec
Connection: 230/400 V, 50 Hz, protection class IP54
Drive pre-wired up to motor terminal box
(Startup must be performed by a qualified electrician)
PU Conveyor Belt DM 10/2 0+005 PU including PU wave edge, petrol matt
Belt width: 600 mm
2 pcs. wave-edged sidewalls, 50 mm high, 25 mm wide, high-frequency welded
42 pcs. T-40 cleats, 400 mm long, approx. 401 mm pitch
Belt material: 2-ply, especially cross-stable
In the bend area, the belt is guided on both sides by 3 hold-down rollers each.
The belt is supplied with a 70 mm non-edged zone on both sides.
Due to the wave-edged sides, the usable belt width is reduced:
Usable width: 300 mm, as follows:
(Top view) transverse arrangement 70+25+5+400+5+25+70 mm
Special Features:
Belt guided via PVC wedge strip on the running surface, profile 10 x 6 mm
- including widened substructure for head load stability
- including cut-out in the discharge sheet
- including sliding joints on drive and deflection rollers
- including non-magnetic zone for overhead magnetic separator
- including holder for DMPM1200 in the inclined section
Discover custom solutions for your industry!
As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and further processing industries. Our extensive product portfolio includes everything from conveyor systems, flat conveyor belts, incline conveyors, and angle conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnets, and dosing bunkers—each customized to our customers' individual requirements.
We understand that every industry and project is unique. That's why we tailor our solutions precisely to your specifications. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For every problem, we find the right solution—no job is too specialized!
Challenge us! Contact us to find out how we can translate your requirements into bespoke solutions. Together, we’ll shape the future of your production processes!
Conveyor belt, conveyor system, discharge conveyors, belt conveyors, magnetic separators, overband magnets, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, grate magnets, metal separator, block magnet, filter systems, dosing bunker, feed hopper, filling systems.
Küçük ilan
Ursberg
2.237 km
Ağaç parçalayıcı
die magnetprofisWinkelförderband Industrie Heavy duty
Ara
Durumu: yeni, Üretim yılı: 2026, Aluminium Angled Conveyor with Substructure
including adjustable leveling feet and machinery feet for compensation of uneven surfaces
Horizontal section: 3,500 mm
Inclined section: 2,100 mm
Incline angle at bend: 45°
Total conveyor length measured on the floor: 5,000 mm
Guedpfxjyhzhue Abtea
Discharge height: 2,000 mm
Height of horizontal section: 500 mm
Design:
Aluminium modular construction
- Triple-reinforced profile 135x45 mm
- Fully covered discharge sheet, 2.0 mm galvanized
Drive roller + return roller made of S235 steel, welded and machined
Ø150x820 mm crowned-turned, shaft fixed with bearing units.
Drive: Shaft-mounted geared motor 1.1 kW, belt speed 0.77 m/sec
Connection 230/400V, 50Hz, protection class IP54
Drive pre-wired up to motor terminal box
(Commissioning must be carried out by a qualified electrician)
PVC conveyor belt DM 15/4 0+007 PVC, including PVC wave edge, green
Conveyor belt width: 800 mm
2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded
32 pcs. T-50 cleats, approx. 355 mm pitch
Belt material: 2-ply, highly cross-rigid
In the bend area, the belt is guided on each side by 3 hold-down rollers.
The belt is designed with a 70 mm edge-free zone on each side.
Due to the double wave edge, the usable belt width is reduced:
Usable width: 490 mm, calculated as follows:
(Top view) crosswise: 100+50+5+490+5+50+100 mm
Discover tailored solutions for your industry!
As an innovative mechanical engineering company, we are proud to offer customized solutions for the recycling, food, and further processing industries. Our extensive product portfolio covers everything from conveyor systems, flat conveyors, incline conveyors and angle conveyors to Z-shaped conveyors. Additionally, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements.
We understand that every industry and every project is unique. That’s why we adapt our solutions specifically to your needs and specifications. Complex projects are exciting challenges for us, and we look forward to developing innovative solutions together with you. With us, there are no off-the-shelf products – for every problem, we find the right solution!
Challenge us! Contact us and discover how we can transform your requirements into bespoke solutions. Together, we shape the future of your production processes!
conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems
Küçük ilan
Ursberg
2.237 km
Ağaç parçalayıcı
die magnetprofisWinkelförderband Z-Förderband
Ara
Durumu: yeni, Üretim yılı: 2026, Fonksiyonellik: tamamen fonksiyonel, Aluminum Z-shaped conveyor belt with substructure, including adjustable feet and omnidirectional transport casters with locking brakes.
Horizontal section: 800 mm
Inclined section: 3,000 mm
Second inclined section: 1,200 mm
Angle at each bend: 60°
Total conveyor belt length (measured on the floor): 3,500 mm
Height of the horizontal section: 400 mm
Design:
- Aluminum construction profile, double-reinforced 90x45 mm
- Full-surface discharge plate, 2.0 mm galvanized
- Drive drum and tail drum: S235 steel, welded and machined
Ø100x720 mm, crowned and precision-turned, shaft mounted on pillow block bearings.
- Drive: Mounted gear motor, 1.10 kW, belt speed: 0.53 m/sec
- Electrical connection: 230/400V, 50Hz, protection class IP54
- Drive supply cable pre-installed up to the motor terminal box
(Commissioning must be carried out by a qualified electrician)
Gsdpfoyhzhnex Abtjua
PU conveyor belt DM 10/2 0+005 PU with wave edge, petrol matte finish, AS (anti-static), especially laterally rigid with a hard cover
- Conveyor belt width: 700 mm
- 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded
- 34 pcs. T40 cleats, centrally positioned, 430 mm long, spacing approx. 299 mm
- Belt material: 2-ply, extra laterally rigid
- In the bend area, the belt is guided on each side by 3 hold-down rollers
The belt is manufactured with a 70 mm edge-free zone on both sides.
Due to the wave edge on both sides, the usable belt width is reduced:
Usable width: 500 mm, calculated as follows:
(Top view) cross arrangement: 70+25+5+500+5+25+70 mm
Belt guidance via PVC V-guide on the running surface, profile 10x6 mm
- Including cut-out in the discharge plate
- Including slide bearings in the drive and tail drums.
Küçük ilan
Burghaun
2.382 km
Westtech Woodcracker C300 ağaç kesme tutucu / Tiltator / YENİ
WesttechWoodcracker C300 Fällgreifer / Tiltator / NEU
Ara
Durumu: kullanılmış, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone).
Westtech Woodcracker C300 Felling Grapple / incl. endlessly rotating tiltator / incl. accumulation grapple / incl. automatic lubrication system for tiltator / NEW unit / in stock & immediately available
- Softwood cutting diameter (mm): 350
- Hardwood cutting diameter (mm): 300
- Grapple opening (mm): 1,430
- Shear opening (mm): 550
- Own weight (basic – fully equipped) (kg): 750 – 1,080
- Recommended main circuit flow rate (l/min): 70 – 150
- Recommended auxiliary circuit flow rate (l/min): 45 – 60
- Recommended operating pressure (bar): 280
- Carrier vehicle operating weight (t): 12 – 18
Equipment features:
- incl. Autospeed function
- incl. accumulation grapple
- incl. endlessly rotating tiltator
- incl. electro-hydraulic switching between accumulation grapple and tiltator
- incl. automatic lubrication system for tiltator
We keep a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available.
Our warehouse offers a very large selection of various products from Westtech, all available immediately!
Mr. Herden (Phone) will be happy to assist you.
On request, we will also be glad to provide you with a financing offer.
We are an official distribution and service partner for:
- Westtech
- OilQuick
- Holp
- Magni Telehandlers
- DMS
Guedpfjykhu Aex Abtoa
- Gierking GMT
- Weber MT
- Seppi M.
- JCB Construction Machinery
- Mercedes-Benz
- Iveco
In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany.
We supply you with the complete Westtech Woodcracker range!
Errors and prior sale excepted!
= Further information =
New: Yes
Part suitable for: Use in forestry
Contact Marius Herden for further details.
Küçük ilan
Burghaun
2.382 km
Westtech CL190 ağaç kesme tutucu / Demo / 2025
WesttechCL190 Fällgreifer / Demo / 2025
Ara
Üretim yılı: 2025, Durumu: kullanılmış, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone).
Westtech Woodcracker CL190 Felling Grapple / in stock & immediately available / Year of manufacture: 2025 / DEMO unit / very good condition
Price: €3,895.00 net / €4,635.00 gross
- Cutting diameter softwood (mm): 250
- Cutting diameter hardwood (mm): 190
- Grapple opening = shear opening (mm): 685
- Own weight (basic – fully equipped) (kg): 210 - 400
- Recommended main circuit flow rate (l/min): 40 - 80
- Recommended main circuit operating pressure (bar): 250
- Recommended auxiliary circuit flow rate (l/min): 20 - 30
- Recommended auxiliary circuit operating pressure (bar): 200
- Carrier vehicle operating weight (t): 2.5 - 7.5
We also have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available.
Our warehouse holds a very large selection of various Westtech products, all immediately available!
Mr. Herden (phone) will be happy to assist you.
On request, we are happy to provide you with a financing offer.
We are an official Westtech sales and service partner.
We are an official Gierking GMT sales and service partner.
We are an official OilQuick sales and service partner.
We are an official Weber MT sales and service partner.
We are an official Holp sales and service partner.
We are an official DMS sales and service partner.
We are an official Seppi M. sales and service partner.
We are an official Magni telehandler sales and service partner.
We are an official JCB construction equipment sales and service partner.
Gsdpfoyi R Ddjx Abtjua
We are an official Mercedes-Benz sales and service partner.
We are an official Iveco sales and service partner.
Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany.
We supply the complete Westtech Woodcracker range!
Subject to errors and prior sale!
Internal No.: 252332
= More information =
New: No
Part suitable for: Intended use forestry
Please contact Marius Herden for more information.
Küçük ilan
Burghaun
2.382 km
Westtech Woodcracker C300 ağaç kesme tutucu / Tiltator / YENİ
WesttechWoodcracker C300 Fällgreifer / Tiltator / NEU
Ara
Durumu: kullanılmış, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone).
Westtech Woodcracker C300 Felling Grapple / incl. endlessly rotating tiltator / incl. accumulation grapple / NEW machine / in stock & immediately available
Cutting diameter softwood (mm): 350
Cutting diameter hardwood (mm): 300
Grapple opening (mm): 1,430
Shear opening (mm): 550
Net weight (basic – fully equipped) (kg): 750 – 1080
Recommended main circuit flow rate (l/min): 70 – 150
Recommended auxiliary circuit flow rate (l/min): 45 – 60
Recommended operating pressure (bar): 280
Carrier vehicle operating weight (t): 12 – 18
Equipment features:
- incl. Autospeed function
- incl. accumulation grapple
- incl. endlessly rotating tiltator
- incl. electrohydraulic switching between accumulation grapple and tiltator
We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available.
Our warehouse holds a large selection of various Westtech products that are available for immediate delivery!
Mr. Herden (phone) will be happy to assist you.
We are happy to provide you with a financing offer on request.
We are an official Westtech distribution and service partner.
We are an official Magni telehandler distribution and service partner.
We are an official Gierking GMT distribution and service partner.
We are an official OilQuick distribution and service partner.
We are an official Weber MT distribution and service partner.
Guedeyix Nnspfx Abtoa
We are an official Holp distribution and service partner.
We are an official DMS distribution and service partner.
We are an official Seppi M. distribution and service partner.
We are an official JCB construction machinery distribution and service partner.
We are an official Mercedes-Benz distribution and service partner.
We are an official Iveco distribution and service partner.
Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany.
We offer the complete Westtech Woodcracker product range!
Errors and prior sale excepted.
= More information =
New: Yes
Part suitable for: application in forestry
Please contact Marius Herden for further information.
Küçük ilan
Varberg
2.621 km
Ağaç parçalayıcı
Vecoplan + CPM + JFKVHZ 1300
Ara
Durumu: kullanılmış, Üretim yılı: 2019, Fonksiyonellik: tamamen fonksiyonel, giriş voltajı: 400 V, giriş frekansı: 50 Hz, Vecoplan VHZ 1300 crusher/chipper, CPM hammer mill, fan and cyclone filters by JFK. Machine in good condition, has only been in operation for approximately 50% of one year. The line is complete with all conveyors.
Guodpfx Absympx Uotea
Küçük ilan
Petershagen
2.512 km
Ağaç kütüğü yarı römorku
SCHWARZMÜLLERHolz Auflieger mit Schemel und Rungen TÜV NEU
Ara
Durumu: kullanılmış, azami yük ağırlığı: 33.780 kg, toplam ağırlık: 39.000 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2019, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Donanım: ABS, Schwarzmüller tomruk yarı römorku, şasi ve dikmeler ile
* BPW akslar, havalı süspansiyon ve disk frenler
Gusdpfxoyld U Io Abtea
* 1. aks kaldırılabilir
* Yedek tekerlek tutucu
* Lastik ebatı 385/65R22,5
* Alüminyum jantlar
* Çalışma lambası
* 2x saklama dolabı
* Jost destek ayakları
Daha fazla bilgi için size memnuniyetle yardımcı oluruz.
Güven mührü
Machineseeker tarafından sertifikalandırılmış bayiler

Küçük ilan
Saint-Jean-de-Sauves
2.969 km
Ağaç makası
HOLTECASC35-15S
Ara
Durumu: iyi (kullanılmış), Üretim yılı: 2015, HOLTEC ASC35-15S SHEAR
For materials: wood offcuts, Ertalon profiles, fiberglass, particle boards, etc.
Power: 11 kW. Includes vibrating conveyor, shear, and scrap discharge conveyor.
Control cabinet included.
Cutting width: 350 mm
Godpfx Absyttgcotjua
Cutting height: 150 mm
Log length: 60-220 mm
Low energy consumption, quiet operation, no waste or dust.
Küçük ilan
Kuchl
2.021 km
Ağaç torna makinesi / torna tezgahı
TWISTER XL
Ara
Durumu: yeni gibi (sergi parçası), EX-DEMONSTRATION MACHINE
Guodpfx Aotpxx Iebtja
For sale is an as-new Drechselmeister TWISTER XL wood lathe with a center distance of 800 mm. The demonstration machine is in its original condition, so you receive the full warranty.
Technical Data
- Center height: 250 mm
- Swing over bed: 490 mm (up to 900 mm with optional outboard turning attachment!)
- Center distance: approx. 800 mm (extendable!)
- Spindle mount: M33 x 3.5 with ASR (European) safety groove*
- Spindle and tailstock taper: MK2
- Frequency inverter (2 belt speeds):
- 60 – 1,350 rpm and 150 – 3,600 rpm
- Quill travel: 150 mm (with scale) and trapezoidal thread spindle
- Motor: 2 HP
- Weight: approx. 290 kg
The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale!
Shipping by freight forwarding:
Austria: €125.00 incl. VAT
Germany: €150.00 incl. VAT
South Tyrol: €180.00 incl. VAT
Related terms: wood lathe, turning machine, lathe, turning, woodturning, turning tools, machine
Reference: R-A0117
Küçük ilan
Kuchl
2.021 km
Ağaç torna makinesi / torna tezgahı
MIDI PRO
Ara
Durumu: yeni gibi (sergi parçası), DEMONSTRATION MACHINE
For sale is an as-new Drechselmeister MIDI PRO bench lathe with a distance between centers of 450 mm.
The demonstration unit is in its original condition, thus you receive the full warranty.
Technical specifications
- Center height: approx. 178 mm (turning diameter 355 mm above the bed)
- Distance between centers: approx. 450 mm (extendable!)
- Speed ranges: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm
- Spindle thread M33 x 3.5 (taper MK2) with ASR (Euro) anti-release groove*
- Tailstock with replaceable quill MK2, 100 mm
- Motor: 0.7 kW / 1 HP (230 V)
- Forward and reverse operation
- Four-prong drive center and live center MK2
- Tool rest 250 mm (shank 25.4 mm)
- Faceplate 95 mm
- Assembled weight approx. 67 kg
- Weight of individual components (for easy transport, e.g. to markets):
- Headstock 27 kg
- Bed 26.4 kg
- Tailstock 7.5 kg
- Complete tool rest 6.2 kg
The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale!
Freight shipping:
Austria: €60.00 incl. VAT
Germany: €70.00 incl. VAT
South Tyrol: €95.00 incl. VAT
Gujdpfjtpn Tlsx Abtea
If you are interested in this machine, please provide your complete address in the contact form so we can process your inquiry in a professional manner!
Thank you, your NEUREITER Team
Related terms: woodturning lathe, lathe, turning machine, lathe bed, woodturning, turning tools, woodturner, wood turning, machine
Reference: R-A0117
Küçük ilan
Kuchl
2.021 km
Ağaç torna makinesi / torna tezgahı
Twister FU 180
Ara
Durumu: yeni gibi (sergi parçası), DEMONSTRATION MACHINE
For sale is an as-new Drechselmeister Twister FU 180 woodturning lathe with a center distance of 560 mm.
The demonstration machine is in its original condition, therefore you receive the full warranty.
Technical Specifications
- Center height: 180 mm
- Swing over bed: 358 mm (can be increased with optional external turning device – depending on the workpiece!)
- Distance between centers: approx. 560 mm (extendable!)
- Spindle thread: M33 x 3.5 with ASR (Euro) anti-loosening groove*
- Spindle and tailstock taper: MK2
- Speeds (2 belt stages): 50 – 1,230 rpm and 150 – 3,700 rpm
- Quill travel: 100 mm (graduated scale), with trapezoidal leadscrew
- Motor: 1.1 kW / 1.5 HP (230 V)
- Total width: 1,345 mm
- Weight floor-standing version: 144 kg
The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale.
Freight shipment:
Austria: €95.00 incl. VAT
Germany: €120.00 incl. VAT
South Tyrol: €140.00 incl. VAT
If you are interested in this machine, please provide your complete address details in the contact form so we can process your inquiry professionally.
Thank you, your NEUREITER team
Related terms: woodturning lathe, lathe, turning machine, turning lathe, woodturning, turning tools, woodturning, turning, machine
Godpfxjtphy As Abtsua
Reference: R-A0117
Sizin için aramayı kolaylaştırıyoruz: "ağaç dikmek"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.
Kullanılmış Ağaç Dikmek (777)
Artık Machineseeker genelinde, 200.000’den fazla kullanılmış makineyle arama yapın.En popüler makine adlarını inceleyin:

Şimdi bilgi alın
+44 20 806 810 84
+44 20 806 810 84
Şimdi ilan ver
*ilan başına/ay














































































































































































































































