Kullanılmış Herkules satın al (5)

Durumu: kullanılmış, Swing diameter over bed: 2400 mm Swing diameter over carriage: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Faceplate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Iiodpfx Adexddvns Rjh Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over carriage: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in spindle faceplate: 300 - 1600 mm (up to 2050 mm with special jaws) Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Infinitely variable faceplate speed, 4 ranges: 1.5 - 150 rpm Maximum torque at nominal speed: 220,000 Nm Main motor power: 185 kW Flange center angle: 70° Carriage Cross-slide travel: 500 mm Longitudinal slide travel: 1400 mm Rapid traverse longitudinal: 2000 mm/min Rapid traverse cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Max. cutting force at carriage: 20,000 kg Tailstock Removable faceplate diameter: 1650 mm Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Features Copying device for first carriage Copy length: 8500 mm Max. copying depth in one pass: 500 mm Boring device: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Max. boring depth in one pass: 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² with an overhang of 1000 mm Decreasing chip section with increasing boring depth Taper turning attachment, adjustable angle up to 8°, max. taper length (single pass) 2000 mm, setting accuracy ± 5 minutes. Taper turning attachment, adjustable angle up to 15°, max. taper length (single pass) 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane at the headstock.

Durumu: kullanılmış, Roll sets for profile bending machine, 3-roller ring bending machine HERKULES WETZLAR The rollers fit a profile bending machine HERKULES WETZLAR type BO 238 N Shaft diameter: 60 mm with 18 mm keyway 2 pieces roller set no.1, roller diameter = 110 mm, roller width = 180 mm 2 pieces roller set no.2, roller diameter = 160 mm, roller width = 40 mm Ijdjglaq Iopfx Ad Rjih 3 pieces roller set no.3, roller diameter = 150 mm, for pipe diameter Ø 33 mm, roller width 87 / 115 mm - Roller set no. 3 with adapter ring from Ø 93 to Ø 60 mm without keyway The machine had 2 driven rollers Total weight of all rollers: 57 kg Good condition

Durumu: kullanılmış, Üretim yılı: 2017, makine/araç numarası: 117119, Ref. No. 25158 Iisdpfx Aexay D Hed Reh Teknik veriler: - Hacim akışı yaklaşık 220 m³/h - Toz sınıfı M - Bağlantı rakoru 50 mm - Çekmece - Pnömatik bağlantı - Tahrik gücü 400 V / 1,3 kW - Alan ihtiyacı (G x Y x D): 1000 x 1350 x 500 mm - Ağırlık yaklaşık 120 kg

Durumu: iyi (kullanılmış), HERKULES BO 230 K2 / Halka ve profil bükme makinesi, merdane setleri dahil -Teknik veriler için görsellere bakınız -6 adet merdane seti -Kullanım aletleri -Makine taşıma tekerlekleri ile donatılmıştır Ölçüler: Isdpfxoxbh Trj Ad Rjih UxGxY: 1,6x1,6x1,7 metre; Ağırlık: 1,8 ton Hatalar ve giriş yanlışlıkları olabilir.

Durumu: kullanılmış, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2270 mm Turning length: 12,000 mm Control: SIEMENS 820T Drive power: 185 kW Faceplate diameter: 1850 mm Spindle speed: 1.6 – 175 rpm Maximum workpiece weight: 70,000 kg Technical data CONTROL: SIEMENS 820T Working area Maximum swing diameter over cross slide: 2270 mm Maximum swing diameter over bed: 2400 mm Maximum turning length with 30 mm slide: 12,000 mm with 80 mm slide: 11,500 mm Clamping diameter in headstock faceplate: 300 – 2040 mm Clamping diameter in tailstock faceplate: 300 – 1300 mm Steady rest capacity: 1000 – 1750 mm Load capacity: 35 t Roller steady rest capacity: 800 – 1100 mm Load capacity: 30 t Roller steady rest capacity from M0911: 300 – 1100 mm Maximum workpiece weight: 70,000 kg Main drive, faceplate Faceplate diameter: 2200 mm Faceplate speed, infinitely variable in 4 steps: 1.6 – 175 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Slides Top slide travel: 735 mm Cut-off slide travel, 35 mm wide: 720 mm Planing slide travel, 80 mm wide: 720 mm Stepless adjustment of slides Rapid traverse longitudinal: mm/min Rapid traverse planar: mm/min Infinitely variable feeds, longitudinal: 0.05 – mm/min Infinitely variable feeds, planar: 0.05 – mm/min Maximum cutting force on support: 200,000 N Planing slide: Heavy-duty cutting and BTS system Tailstock Diameter of faceplate (removable): 1850 mm Faceplate clamping diameter: 1300 mm Flange center angle: 70° Rapid adjustment: 2,000 mm/min Special equipment Iedpfsxc Ny Asx Ad Rjih SIEMENS control Slide measurement system Boring bar holder with boring bar mount Ø 300 mm