Kullanılmış Manyetik Plaka satın al (4.462)
Sonuçları sırala
- En düşük fiyat En yüksek fiyat
- En son ilanlar En eski ilanlar
- En kısa mesafe Maksimum mesafe
- En yeni üretim yılı En eski üretim yılı
- En son güncelleme En eski güncelleme
- Üreticiler A'dan Z'ye Üretici Z'den A'ya
- Uygunluk
- En düşük fiyat
- Fiyat
- En yüksek fiyat
- Fiyat
- En son ilanlar
- Yayınlanma tarihi
- En eski ilanlar
- Yayınlanma tarihi
- En kısa mesafe
- Mesafe
- Maksimum mesafe
- Mesafe
- En yeni üretim yılı
- Üretim yılı
- En eski üretim yılı
- Üretim yılı
- En son güncelleme
- Son güncelleme tarihi
- En eski güncelleme
- Son güncelleme tarihi
- Üreticiler A'dan Z'ye
- Makine üreticisi
- Üretici Z'den A'ya
- Makine üreticisi
- A'dan Z'ye adlandırma
- Tanım
- Z'den A'ya adlandırma
- Tanım
- A'dan Z'ye model
- Model
- Modelden Z'den A'ya
- Model
- En düşük referans
- Referans
- En yüksek referans
- Referans
- En kısa çalışma süresi
- Çalışma süresi
- En uzun çalışma süresi
- Çalışma süresi
- Uygunluk
- Uygunluk
Küçük ilan
Avusturya
1.826 km
Manyetik matkap makinesi
PROMOTECHPRO-36 PM Battery
Ara
Durumu: yeni, Condition: New
Delivery time: approx. 2 - 4 weeks from order
Country of origin: Poland
Price: €2,595
Drilling capacity in structural steel: 12 mm
Shank: 19 mm Weldon
Motor power: 0.4 kW
Length: 361 mm
Width: 238 mm
Height: 352 mm
Weight: 14.5 kg
Hsdpfx Ageyrhtnsgsff
Max drilling capacity: 12 mm
Max annular cutter capacity: 36 mm
Max cutting depth: 50 mm
Stroke: 70 mm
Motor speed: 260 rpm
Min. workpiece thickness: 6 mm
This special battery-powered magnetic drilling machine with a permanent magnet base is designed for use in remote locations where no power supply is available. The base features very strong neodymium magnets and does not require power for operation. The PRO-36 PM Battery comes equipped with an LED monitoring system that emits green and red signals to indicate the machine’s current status and provide safety warnings. The drill can be used on convex (min. diameter 80 mm) and concave (min. diameter 1000 mm) materials. Up to 47 holes D=20mm in 10mm thick steel plates can be drilled when the PRO-36 PM Battery is equipped with the CAS LiHD 10.0 Ah battery pack.
Features and advantages:
• LED monitoring system flashes green if insufficient adhesion is detected, for example, due to a gap or workpieces being too thin
• Double guide system ensures exceptional precision and maintenance-free operation
• Overload protection
• Tilt sensor stops the motor if there is a machine interruption or if the machine detaches
• The control panel is equipped with so-called “vandal-proof” illuminated start/stop switches for the motor
Standard shipping set:
• Cordless drilling machine with cooling system
• Plastic case
• 4.0 Ah battery
• Handle (3 pcs)
• Safety strap
• 4 mm Allen key with handle
• Operating manual
OPTIONS (PRICES ON REQUEST):
Charger
Pressure cooling system
Vacuum pad
Vacuum pump
Pneumatic ejector
Küçük ilan
Avusturya
1.826 km
Manyetik matkap makinesi
PROMOTECHPRO-72T
Ara
Durumu: yeni, Condition: New
Delivery time: approx. 2 - 4 weeks from order
Country of origin: Poland
Price: €1,995
Drilling capacity in structural steel: 25 mm
Shank: 19 mm Weldon
Motor power: 1.6 kW
Tapping capacity: M20
Length: 266 mm
Width: 259 mm
Height: 505 mm
Weight: 18 kg
Max. drilling capacity: 25 mm
Max. annular cutter capacity: 70 mm
Max. cutting depth: 75 mm
Stroke: 190 mm
Motor speed: 120–190 / 290–450 rpm
Min. workpiece thickness: 8 mm
The PRO-72T magnetic drilling machine is suitable for drilling and tapping.
The powerful motor with variable speed control allows for annular cutter operations up to 70 mm (2-3/4") and drilling up to 25 mm (1").
The machine can cut threads up to M20 thanks to clockwise and counterclockwise rotation and the new tapping system from Promotech.
The two-speed gearbox with stepless speed control enables optimal speed adjustment depending on diameter, steel grade, or tool type.
The intelligent speed control system keeps the motor speed constant regardless of load.
The innovative 360° LED display simplifies operation and increases jobsite safety.
Features and benefits:
• Powerful motor with robust 2-speed gearbox
• Electronic speed stabilization system (ESSS) for constant speed independent of load changes
• Tapping possible in through- and blind holes
• Milling with carbide or HSS cutters as well as drilling
• Electronic clutch
• Overload and overheating protection
• Rugged construction for extended tool life
• Tilt sensor stops motor in case of machine displacement
• 360° visualization indicates current machine status and provides safety and diagnostic information, e.g. for worn carbon brushes
• Innovative lightweight smart magnet
• Magnetic Field Shape Control (MFSC) for maximum holding force on thin materials
• Energy Saving Base (ESB) only consumes 50% power in standby mode
• Semi-automatic spline adjustment for simple, quick, precise, and repeatable guide clearance setting without specialist knowledge
• Intuitive control panel on top of the drilling machine
• Large coolant tank
Standard scope of supply:
Hsdpfxeyrhrwj Aggeff
• Drilling machine
• Plastic case
• Handles (3 pcs.)
• MK3 arbor with 19 mm (3/4") weldon tool holder
• Safety strap
• Cooling system
• Protective spring for coolant hose
• MT2 drift
• 5 mm Allen key with handle
• 4 mm Allen key
• 2.5 mm Allen key
• 8 mm combination spanner
• Operating manual
OPTIONS (PRICES ON REQUEST):
Pressurized cooling system
Pipe clamping device
Küçük ilan
Avusturya
1.826 km
Manyetik matkap makinesi
PROMOTECHPRO-36 Battery
Ara
Durumu: yeni, Condition: New
Delivery time: approx. 2 - 4 weeks from order
Country of origin: Poland
Price: €1,695
Drilling capacity in structural steel: 12 mm
Tool holder: 19 mm Weldon
Motor power: 0.45 kW
Length: 316 mm
Width: 235 mm
Height: 328 mm
Weight: 11.5 kg
Max. drilling capacity: 12 mm
Max. annular cutter capacity: 36 mm
Max. cutting depth: 50 mm
Stroke: 70 mm
Motor speed: 260 rpm
Min. workpiece thickness: 6 mm
The PRO-36 Battery is a magnetic drill suitable for drilling holes up to 36 mm diameter using annular cutters. It can also drill holes up to 12 mm diameter with twist drills.
Hfodpfsyrhqtsx Aggjf
The cordless drill is equipped with an LED monitoring system that signals machine status and safety information in green and red. The control panel features so-called 'vandal-proof' illuminated start/stop switches (green/red).
Features and advantages:
• LED monitoring system displays current machine status and safety information
• LED system flashes green if insufficient adhesion is detected, e.g. due to a gap or workpieces being too thin
• Dual guide system ensures exceptional precision and maintenance-free operation
• Overload protection
• Magnetic field sensor automatically stops the motor if holding force is insufficient
• Magnetic Field Shape Control (MFSC) provides maximum holding force, even on thin materials
• Energy Saving Base (ESB) consumes only 50% power when the motor is not running
• Innovative intelligent magnet with reduced weight
Standard delivery set:
• Cordless drill
• Plastic case
• 4.0 Ah battery
• Handle (3 pcs)
• Safety strap
• Cooling system
• 4 mm Allen key with handle
• Operating manual
OPTIONS (PRICES ON REQUEST):
Charger
Pipe attachment
Pressure cooling system
Vacuum pad
Vacuum pump
Pneumatic ejection device
Küçük ilan
Avusturya
1.826 km
Manyetik matkap makinesi
PROMOTECHPRO-36
Ara
Durumu: yeni, Condition: New
Delivery time: approx. 2 - 4 weeks from order
Country of origin: Poland
Price: €595
Drilling capacity in structural steel: 12 mm
Shank: 19 mm Weldon
Motor power: 0.1 kW
Length: 175 mm
Width: 250 mm
Height: 312 mm
Weight: 10 kg
Max. drilling capacity: 12 mm
Max. annular cutter capacity: 36 mm
Max. cutting depth: 51 mm
Stroke: 70 mm
Motor speed: 350 rpm
The PRO-36 drills holes with a diameter of up to 36 mm using annular cutters.
The machine can also drill holes up to 12 mm in diameter using twist drills with a 19 mm (3/4”) Weldon shank.
Its compact design and excellent weight-to-performance ratio make this magnetic drilling machine a very popular choice among customers.
Features and Benefits:
• Double guide rod system ensures exceptional rigidity and maintenance-free operation
• Compact size and ultra-light weight—ideal for jobsite use
• Robust, one-piece carriage and gearbox housing for added stability
• Specially designed motor with heavy-duty gearbox
Hsdoyrhqmjpfx Aggjff
• Maintenance-friendly design for easy operation
• Magnetic Field Shape Control (MFSC) provides maximum holding force on thin materials
• Magnetic Power Adhesion Control module (MPAC) detects the holding power of the electromagnetic base, protecting both the operator and the machine when used on thin workpieces
Standard scope of delivery:
• Magnetic core drilling machine
• Metal case
• Chip guard/drill guard
• Coolant bottle unit
• Safety chain with carabiner
• Allen key size 4
• Operating manual
• Standard shipping weight: 16.7 kg
OPTIONS (PRICES ON REQUEST):
• 2-liter cooling system
• Vacuum pad
• Pneumatic ejector
• Pipe clamping device
Küçük ilan
Avusturya
1.826 km
Manyetik matkap makinesi
PROMOTECHPRO-50
Ara
Durumu: yeni, Condition: new
Delivery time: approx. 2 – 4 weeks after order
Country of origin: Poland
Price: €995
Drilling capacity in structural steel: 23 mm
Shank: 19 mm Weldon
Motor power: 1.15 kW
Length: 331 mm
Width: 254 mm
Height: 456 mm
Weight: 15.5 kg
Maximum drilling capacity: 23 mm
Maximum annular cutter capacity: 50 mm
Maximum cutting depth: 50 mm
Stroke: 160 mm
Motor speed: 240 / 480 rpm
Minimum workpiece thickness: 6 mm
The PRO-50 features a specially developed motor and a 2-speed gearbox (240/480 rpm) optimized to deliver suitable cutting speeds for HSS cutters up to Ø 45 mm and twist drills up to Ø 23 mm. The rigid frame, optimized via FEA software (Finite Element Analysis), enhances tool life and allows a cutting depth of up to 75 mm. Its compact design and innovative lightweight smart magnet make the machine exceptionally portable. Thanks to Magnetic Field Shape Control (MFSC), the PRO-50 achieves maximum holding force on thin materials. Both the operator and the machine are protected from working on overly thin workpieces by the Magnetic Power Adhesion Control (MPAC) module. Additionally, the PRO-50 is equipped with an Energy Saving Base (ESB), which consumes only 50% of its power when the motor is idle.
Features and benefits:
• Compact design with excellent weight-to-performance ratio
• Specially developed motor
• Motor speeds 240/480 rpm (under load)
• Spindle equipped with MT2 taper
• Innovative smart magnet with reduced weight
• Rigid construction extends tool life
• Large stroke accommodates long tools
• Motor cable with additional protective cover
• Magnetic Field Shape Control (MFSC) provides maximum holding force on thin materials
• Magnetic Power Adhesion Control module (MPAC) monitors the holding force of the electromagnetic base, protecting both the operator and the machine from working on too thin workpieces
• Energy Saving Base (ESB) consumes only 50% power when the motor is not running
Standard shipping set:
• Magnetic drilling machine
• Plastic case
• Handle (3 pcs)
• MT2 arbor with 19 mm (3/4") Weldon tool holder
• Safety strap
• Cooling system
• Protective spring for coolant hose
• MT2 drift
• 2.5 mm Allen key
• 5 mm Allen key
• 5 mm Allen key with handle
• 8 mm open-ended spanner
• Operating manual
OPTIONS (PRICES ON REQUEST):
Pipe attachment
Pressurized cooling system
Hfjdeyrhp Nopfx Aggof
Vacuum pad
Vacuum pump
Compressed air ejector
Küçük ilan
Avusturya
1.826 km
Manyetik matkap makinesi
PROMOTECHPRO-40 AD
Ara
Durumu: yeni, Condition: new
Delivery time: approx. 2–4 weeks from order
Country of origin: Poland
Price: €1,055
Drilling capacity in structural steel: 12 mm
Tool holder: 19 mm Weldon
Motor power: 1.1 kW
Length: 400 mm
Width: 126 mm
Height: 185 mm
Weight: 10 kg
Max. drilling capacity: 12 mm
Max. annular cutter capacity: 40 mm
Max. cutting depth: 40 mm
Stroke: 45 mm
Motor speed: 370 rpm
Min. workpiece thickness: 6 mm
The PRO-40 AD is a low-profile magnetic drilling machine that can be used even in the tightest spaces. It is the ideal solution for any application in confined areas where conventional magnetic drills are too large. Its powerful motor allows for drilling holes up to 40 mm in diameter and up to 40 mm deep.
An innovative, extremely strong magnetic base with high holding force, even with air gaps, enables operation on painted, rusted or thin surfaces. The Magnetic Power Adhesion Control (MPAC) protects both the drill and the operator by preventing the motor from switching on if the holding force is dangerously low, such as on surfaces that are too thin or unsuitable.
Hsdpfxsyrhp Ao Aggoff
The PRO-40 AD is compatible with both carbide and HSS cutters, as well as twist drills with a 19.05 mm Weldon shank.
Features & Benefits:
• Ultra-compact magnetic drill with only 185 mm height
• Extremely strong magnetic base with 1009 kgf (9900 N) holding force
• Compact and lightweight design, weighing only 10 kg
• Cutters up to 40 mm diameter with annular cutters
• Suitable for twist drills with 19.05 mm (3/4") Weldon shank
• Extended stroke of 45 mm allows cutting depths up to 40 mm
• Magnetic Field Shape Control (MFSC) for maximum holding power with thin materials
• Integrated chip guard
• Removable feed handle (with ratchet), mountable on either side
• Carrying handle for easy transport
• Cooling with coolant bottle
Standard equipment includes:
• Magnetic drill
• Plastic carrying case
• Handle
• Ejector pin 6.34 x 102 mm for HSS cutters
• Ejector pin 7.98 x 103 mm for TCT cutters
• Safety belt
• 4 mm hex key
• Operating manual
OPTIONS (PRICES ON REQUEST):
Extension for cutting
250 ml coolant bottle
Küçük ilan
Avusturya
1.826 km
Manyetik matkap makinesi
PROMOTECHPRO-36 Auto
Ara
Durumu: yeni, Condition: New
Delivery time: approx. 2–4 weeks from order
Country of origin: Poland
Price: €1,445
Arbor: 19 mm Weldon
Motor power: 1 kW
Length: 307 mm
Width: 221 mm
Height: 317 mm
Weight: 13.5 kg
Max. annular cutter capacity: 36 mm
Max. cutting depth: 51 mm
Stroke: 70 mm
Motor speed: 350 rpm
Min. workpiece thickness: 6 mm
The new PRO-36 AUTO is equipped with a unique LED monitoring system that displays the current condition of the magnetic drill and provides additional safety and diagnostic information. The Auto Feed Smart Drive System optimizes settings for each cutting/milling operation in automatic mode. The drill controller continuously selects the most efficient operating conditions based on the ratio of motor load, feed rate, and the range of permissible cutting parameters for the respective tool type and bore diameter. This results in longer service life for HSS and TCT cutters and improved machine performance.
Countersinking and machining thin workpieces with low magnetic adhesion (flashing green LED) can only be performed in manual mode. A safety strap protects the machine from falling in the event of loss of magnetic force.
Features and benefits:
• LED monitoring system displays the current status of the drill and provides safety and diagnostic information.
• The LED system flashes green when insufficient magnetic adhesion is detected, such as gaps or thin workpieces.
• Auto Feed Smart Drive individually optimizes milling parameters for each tool, depending on type (HSS or TCT) and bore diameter from 12 mm to 36 mm, significantly extending tool life.
• Tilt sensor stops the motor if the machine tilts.
• The double-rod guide system ensures exceptional rigidity and backlash-free operation.
• Magnetic Field Shape Control (MFSC) provides maximum holding force even on thin materials.
• Automatic feed control stops the machine once the cutter passes through the workpiece.
• Protection against automatic restart after power failure.
• Compact, robust design with an ultra-light weight of 13.5 kg.
Standard scope of delivery:
• Magnetic drill
• Metal case
• Safety strap
• Coolant tank
• Chip guard
Hjdsyrhppspfx Aggoff
• 4 mm hex key
• Instruction manual
Küçük ilan
Unterschleißheim
2.159 km
Plaka makasları - hidrolik
SAFANVS310-6
Ara
Durumu: kullanılmış, Üretim yılı: 1980, sac genişliği 3000 mm
sac kalınlığı 6 mm
kesme açısı
Hfsdpfxjvxwiho Aggof
yağ miktarı 150 l
toplam güç gereksinimi 15 kW
Makine ağırlığı yaklaşık 6,2 t
Alan gereksinimi yaklaşık 3,9 x 2,2 x 1,7 m
Ön stop sol, 2 destek kolu, motorlu arka stop,
Kesme aralığını elle ayarlama, 1 set yedek bıçak
Küçük ilan
Wijchen
2.685 km
Dikey plaka testere Elcon RSX-L 185 1996 model
ElconRSX-L 185
Ara
Durumu: kullanılmış, Üretim yılı: 1996, toplam uzunluk: 5.550 mm, toplam genişlik: 1.600 mm, toplam yükseklik: 2.730 mm, Weight: 1,000 kg
Panel Saw
Elcon 185 RSXL
Maximum cutting width: 4150 mm
Maximum cutting height: 1850 mm
Maximum cutting depth: 80 mm
3 kW motor
4,200 rpm
Saw blade diameter: 300 mm
Required air pressure: 6 bar
Machine dimensions: 5550 x 1600 x 2730 mm (L x W x H)
- Year of manufacture: 1996
- Documentation available: Yes
- CE marking present: Yes
- CE certificate available: No
Hsdpfx Agjyz U Nvsgsff
- Serial number: 960708
- Max. vertical cutting height [mm]: 1850
- Max. cutting width [mm]: 4150
- Max. cutting depth [mm]: 80
- Max. saw blade diameter [mm]: 300
- Horizontal cutting: Yes
- Vertical cutting: Yes
- Voltage [V]: 400
- Power consumption [A]: 8
- Fuse [A]: 16
- Power output [kW]: 3.0
- Transport dimensions: 5550 mm x 1600 mm x 2730 mm (L x W x H)
- Transport weight [kg]: 1000 kg
- Number of transport packages: 1
Financial information
VAT: The listed price is subject to VAT
VAT/margin scheme: VAT deductible for business customers
Delivery and trade-in possible at any time for all items in the industrial sector
Yorick Diebels
Küçük ilan
Niederlangen
2.634 km
Plaka makasları - hidrolik
BAYKALHGL 3100 x 6
Ara
Durumu: kullanılmış, Üretim yılı: 1998, Sheet width: 3060 mm
Sheet thickness: 6.0 mm
Sheet thickness (stainless steel): 4.0 mm
Frame gap: 3100 mm
Hold-downs: 16 units
Stroke rate max.: 10 - 15 strokes/min
Oil capacity: 160 liters
Cutting angle: 1.6°
Backgauge - adjustable: 6.0 - 750 mm
Control: ELGO P9521
Total power requirement: 18.5 kW
Weight: 6300 kg
Dimensions (L x W x H): 3900 x 2300 x 1630 mm
Equipment:
- Robust electro-hydraulic swing-beam shear
- ELGO digital display model P9521 for electric backgauge
* Backgauge travel path X = 750 mm
* Backgauge with backlash-free ball screw
* Travel speed: 100 mm/sec
- 1x sturdy side stop
* with T-slot, flip-stop, and millimeter scale
- 2x stable front support arms
- Electric cutting length limitation
* Cutting length limitation to increase strokes/min
- Manual blade gap adjustment
* Centrally operated on right side frame
- Front support sheets
Hfodpfx Asyq Szmjggef
- Front finger/entry guard
- Jog operation with pushbuttons on left-side control panel
- Safety guard: safety device behind the machine
- Operating manual
Küçük ilan
Niederlangen
2.634 km
Plaka makasları - hidrolik
HACOTS 306
Ara
Durumu: kullanılmış, Üretim yılı: 1983, sac genişliği 3050 mm
sac kalınlığı 6.0 mm
sütun genişliği 3000 mm
kesme açısı 0,5 - 3 °
vuruş hızı 9 / 14 vuruş/dakika
tutma aygıtı 18
toplam güç gereksinimi 10 kW
Makine ağırlığı yaklaşık 4800 kg
Alan gereksinimi yaklaşık 3750 x 1600 x 1650 mm
Teçhizat:
- hidrolik / kılavuzlu sac makasları
- elektrikli arka durdurucu 10-750 mm
- elektrikli kesme açısı ayarı
Hfedpsvxlpiofx Aggjf
- manuel kesme boşluğu ayarı
- 1x yan durdurucu
- Ön tarafta parmak koruması
- ayak anahtarı
Küçük ilan
Almanya
2.417 km
Plaka taşıma arabası
BeckMobillifter ML-120
Ara
Üretim yılı: 2024, Durumu: yeni, mobil plaka taşıma arabası
yeni teşhir cihazı, üretim yılı 2024
- Plaka yüksekliklerinin 1600 mm'ye kadar istiflenmesi, elektrikli tahrikli
- İleri-geri eğim açısı 100°, elektrikli tahrikli
- Baş menteşe dönme açısı saat yönünde/tersi 180°
- Baş menteşe toplam dönme açısı: 360°
- Taşıma kapasitesi 120 kg
- Plaka boyutları: maksimum 2100 x 3200 mm
- Toplam yükseklik 2090 mm
- Genişliği ayarlanabilir 6 güçlü vakum emici ile birlikte
Mobilifter ML-120 aşağıdakilerden oluşur:
Hfedjw I Upnopfx Aggjf
- mobil alt şasi
- elektrikli kaldırma ve eğme sistemi
- otomatik vakum ünitesi
- kablosuz elektrikli kumanda
- ağırlık: 170 kg
Mevcutluk: kısa sürede teslim
Stok yeri: Flörsheim
Küçük ilan
Niederlangen
2.634 km
Plaka makasları - hidrolik
EHTTrumaCut M 1630
Ara
Durumu: kullanılmış, Üretim yılı: 2005, Sheet width: 3050 mm
Sheet thickness: 16 mm
Frame gap: 3100 mm
Strokes per minute: 16
Backgauge - adjustable: 10 - 1000 mm
Cutting angle: 0.5 - 2.5°
Hold-downs: 13 units
Oil capacity: 300 l
Total power requirement: 22 kW
Weight: 14,000 kg
Dimensions: 4100 x 2300 x 2000 mm
Equipment:
- Electro-hydraulic guillotine shear with guided ram
- ELGO P9724 NC digital control unit
* Setpoint/actual value input for backgauge possible
* Digital value display
- Electro-hydraulic adjustment of cutting angle
- Electro-hydraulic adjustment of blade gap
- Front finger guard
- 1x heavy-duty side stop with T-slot and mm scale
- 3x front support arms
- Hydraulic sheet hold-downs
- 2x emergency stop buttons at front
- Rear safety device (protective grid)
- Original operating manual
* Special accessories included:
- Backgauge system with conveyor belt
Hfjdpfx Agsyzi Nwogef
* With pneumatic sheet support device
* Conveyor belt with pneumatic scrap diverter
* Return to Sender (sheet return to operator)
Küçük ilan
Niederlangen
2.634 km
Plaka makasları - hidrolik
ATLANTICATS 3000
Ara
Durumu: kullanılmış, Üretim yılı: 2002, Sac genişliği 3050 mm
Sac kalınlığı 6 mm
Arka dayama 1000 mm
Kesme açısı 0,5 - 3 °
Baskı elemanı 18 adet
Strok sayısı 9-17 strok/dak
Toplam güç ihtiyacı 7,5 kW
Alan ihtiyacı yaklaşık 3800 x 2000 x 1600 mm
Ağırlık 4500 kg
Donanım:
- Elektrikli arka dayama
- Elektrikli kesme açısı ayarı
- Manuel kesme aralığı ayarı
Hfedpfx Asyrhvvoggof
- SP 9 kontrol ünitesi
- Makinenin arkasında ışık bariyerli koruma sistemi
- Ön parmak koruması
- 1x yan dayama
- Kullanım kılavuzu
Küçük ilan
Niederlangen
2.634 km
Plaka makasları - hidrolik
ATLANTICATS 3000
Ara
Durumu: kullanılmış, Üretim yılı: 1998, Sac genişliği 3050 mm
Sac kalınlığı 6 mm
Arka dayama 10–750 mm
Kesim açısı 0,5–3°
Baskı tutucu 18 adet
Hodpfx Agsw S Nknjgsff
Vuruş sayısı 9 / 14 vuruş/dakika
Toplam güç gereksinimi 7,5 kW
Alan ihtiyacı yaklaşık 3750 x 1600 x 2450 mm
Ağırlık 4800 kg
Donanım:
- elektro-hidrolik raylı sac makası
- önde, sol tarafta kontrol paneli
- elektro-hidrolik kesme açısı ayarı
- manuel bıçak aralığı ayarı, önden (eksantrik)
- elektro-motorlu arka dayama 10–750 mm (bilyalı mil)
- analog pozisyon göstergesi + hassas ayarlama için el çarkı
- 1x yan dayama
- 3x destek kolu
- 1x serbest hareketli ayak pedalı
- ön parmak koruması
- Kullanım kılavuzu (PDF)
Küçük ilan
Niederlangen
2.634 km
Plaka makasları - hidrolik
ERMAKHGS 3100 x 6
Ara
Durumu: kullanılmış, Üretim yılı: 2008, Sac genişliği 3100 mm
Sac kalınlığı 6 mm
Arka dayama 1000 mm
Kesme açısı 1,2°
Tutma cihazı 14 adet
Strok hızı 18 vuruş/dak
Yağ içeriği 150 l
Toplam güç gereksinimi 11 kW
Alan gereksinimi yaklaşık 3900 x 1900 x 1600 mm
Ağırlık 5500kg
Teçhizat:
- hidro. Salıncak kesme makası
-ELGO kontrolü
- elektrikli arka dayama 1000 mm
- manuel kesme boşluğu ayarı
Hodpfx Ajvuz Tpoggeff
- Kesme uzunluğu sınırlaması
- Masadaki bilyalı silindirler
- 2x ön destek kolları
- 1x terazili ön yan durdurma
- ön parmak koruması, menteşeli
- arka güvenlik cihazı (koruyucu ızgara + ışık bariyeri)
- Ayak pedalı
- Kullanım kılavuzu
Küçük ilan
Einbeck
2.426 km
Weber Titreşimli Plaka CF 1 HD-III - Üretim Yılı 2025
WeberCF 1 HD-III
Ara
Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2025, Weber titreşimli plaka CF 1 HD-III CF 1 HD-III — Üretim yılı 2025
Kurt König Baumaschinen GmbH, Einbeck’in profesyonel kiralama parkından ikinci el.
Hfsdoy A Hbmjpfx Aggof
Durum & Bilgiler:
- Durum: Kiralamadan iade, düzenli bakımlı
- Fonksiyon: Tamamen çalışır durumda
- Ürün görselleri yakında — güncel fotoğraflar için lütfen bizimle iletişime geçin
- 37574 Einbeck’te randevu ile inceleme mümkündür
Fiyat 1.300 EUR + KDV | EXW Einbeck | Teslimat talep üzerine
Küçük ilan
Einbeck
2.426 km
Bomag Titreşimli Plaka BP 20/50 D - Üretim Yılı 2024
BomagBP 20/50 D
Ara
Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2024, Bomag Titreşimli Plaka BP 20/50 D — Üretim yılı 2024
Kurt König Baumaschinen GmbH, Einbeck’in profesyonel kiralama parkından kullanılmış.
Hedpsy A E U Sofx Aggjff
Durum ve Notlar:
- Durum: Kiralıktan kullanılmış, düzenli bakımdan geçmiş
- İşlevsellik: Tamamen çalışır durumda
- Ürün görselleri yakında — ilgileniyorsanız güncel fotoğraflar için lütfen bizimle iletişime geçin
- 37574 Einbeck adresinde randevu ile inceleme mümkün
Fiyat 1.900 EUR + KDV | EXW Einbeck | Teslimat talep üzerine
Küçük ilan
Einbeck
2.426 km
Weber titreşimli plaka CF 3/60 H - Üretim yılı 2024
WeberCF 3/60 H
Ara
Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2024, Weber titreşimli plaka CF 3/60 H — Üretim yılı 2024
Profesyonel kiralama filosundan, Kurt König Baumaschinen GmbH, Einbeck'ten kullanılmış.
Hsdpfx Agey A E U Esgoff
Durum & Notlar:
- Durum: Kiralamadan kullanılmış, düzenli bakımlı
- Fonksiyon: Tamamen çalışır durumda
- Ürün fotoğrafları yakında — güncel fotoğraflar için lütfen bizimle iletişime geçin
- 37574 Einbeck'te randevu ile yerinde inceleme mümkündür
Fiyat 1.950 EUR + KDV | EXW Einbeck | Teslimat talep üzerine
Küçük ilan
Wijchen
2.685 km
Dikey Plaka Testereleri Harwi Piranha 1250 2021
HarwiPiranha 1250
Ara
Durumu: kullanılmış, Üretim yılı: 2021, toplam uzunluk: 3.300 mm, toplam genişlik: 1.200 mm, toplam yükseklik: 2.150 mm, Weight: 500 kg
Price: On request
- Year of manufacture: 2021
- Documentation available: No
- CE marking present: Yes
- CE certificate available: No
- Serial number: 5026BW
- Max. horizontal cutting height [mm]: 1250
- Max. cutting width [mm]: 2500
- Max. cutting depth [mm]: 55
- Min. saw blade diameter [mm]: 250
- Max. saw blade diameter [mm]: 250
Hfsdpfx Agoyzm Hmjgof
- Bore diameter for saw blade [mm]: 30
- Horizontal cutting: Yes
- Vertical cutting: Yes
- Voltage [V]: 400
- Power consumption [A]: 6.6
- Fuse [A]: 16
- Power output [kW]: 3.0
- Transport dimensions: 3300mm x 1200mm x 2150mm (L x W x H)
- Transport weight [kg]: 500kg
- Transport packages [pcs.]: 1
Financial Information
VAT: The stated price is excluding VAT
VAT/margin scheme: VAT deductible for businesses
Delivery and trade-in possible at any time for all industrial equipment.
Yorick Diebels
Küçük ilan
Bad Honnef
2.537 km
Plaka testere HOLZ-HER 1255 - kullanılmış -
Holz-Her1255
Ara
Durumu: mükemmel (kullanılmış), Panel Saw HOLZ-HER 1255 -used-
Welded frame with extremely high rigidity,
pneumatically retractable movable support bar,
stable locking of the saw carriage at the top and bottom,
locking during vertical cuts is electrically monitored,
Hedpfx Ageyyzp Hjgjff
foldable plunge lever on the saw unit,
retractable riving knife for cut-outs,
control panel at eye level,
digital display on the longitudinal stop,
digital display for horizontal cuts,
strip cutting device,
roller conveyor system for transport,
trimmable support surface,
dust extraction system TRK,
dust-tested
----- Technical Data -----
Cutting length: 5,200 mm
Cutting height: 2,200 mm
Trimming height: 2,100 mm
Cutting depth: 60 mm
Minimum height on swing rail: 120 mm
Saw blade Ø: 250 mm
Motor: 4 kW
Extraction nozzle Ø: 120/100 mm
Compressed air: 6 bar
Space requirements (LxWxH): 6500x1650x3050 mm
Weight: 900 kg
Quality Info:
- fence rails renewed / overhauled
- complete basic inspection
- complete basic cleaning
- electrics checked
- immediately operational
Güven mührü
Machineseeker tarafından sertifikalandırılmış bayiler

Küçük ilan
Avusturya
1.826 km
Plaka bükme makinesi - 3 silindirli
HESSE by ISITANR 1270 x 68
Ara
Durumu: yeni, Durum: yeni
Teslim süresi: siparişten itibaren yaklaşık 10 hafta
Menşei ülke: Türkiye
Fiyat: 2900 €
Bükme uzunluğu: 1270 mm
Maks. bükme kapasitesi (inşaat çeliği): 1,2 mm
Üst merdane çapı: 68 mm
Motor gücü: 1,5 kW
Uzunluk: 1610 mm
Genişlik: 700 mm
Yükseklik: 1160 mm
Ağırlık: 385 kg
3 merdane
Asimetrik merdane düzeni - ön bükmeli
Alt ve arka merdanede tel kanalları
Hfedpfx Ageynndrogof
Alt merdanenin merkezi kol ile ayarlanması – dişli sistemli
Alt şase
Kullanım kılavuzu ALMANCA veya İNGİLİZCE
Küçük ilan
Almanya
2.357 km
Plaka delme değirmeni - Yatay
PAMA2/TR 8
Ara
Durumu: iyi (kullanılmış), Üretim yılı: 2007, Kontrol 840 D
Hodpfx Aswzyp Ujggeff
x-Ekseni 2500 mm
y-Ekseni 2500 mm
z-Ekseni 1700 mm
Kontrol - Siemens Sinumerik 840 D
Maks. iş parçası ağırlığı - 6000 kg
Mil çapı - 130 mm
Fener mili ilerlemesi - 700 mm
Takım tutucu - ISO 50 DIN 69871 - AD
Maks. mil torku - 1847 Nm
Toplam güç ihtiyacı - 65 kW
Makine ağırlığı yaklaşık 45 t
Alan ihtiyacı yaklaşık 10,9 x 9,3 x 5,7 m
Küçük ilan
Günzburg
2.255 km
Plaka makasları - mekanik
RAS82.25
Ara
Durumu: kullanılmış, Üretim yılı: 1980, Sac genişliği: 2540 mm
Sac kalınlığı: 2 mm
Paslanmaz çelik için sac kalınlığı: 1,25 mm
Strok sayısı: 63 strok/dak
Kesme açısı: 1,13°
Tabla yüksekliği: 750 mm
Tabla genişliği: 320 mm
Arka dayama - ayarlanabilir: 5,0-550 mm
Toplam güç ihtiyacı: 3 kW
Makine ağırlığı: yaklaşık 1600 kg
Donanım:
- Manuel arka dayama, analog göstergeyle
* önden ayarlanabilir
* tüm çalışma aralığında kademesiz ayar
- 1x uzun yan dayama
Hodpfx Aeyv N I Aeggoff
- 3x destek kolu
- serbest hareketli ayak pedalı
- İnce sac kesimleri için sac kaldırma aparatı
Küçük ilan
Günzburg
2.255 km
Plaka makasları - hidrolik
EHTTSS 6-31
Ara
Durumu: kullanılmış, Üretim yılı: 1977, Sac genişliği 3050 mm
Sac kalınlığı 6 mm
Ağırlık 7.000 kg
Ölçüler U-G-Y 3450x2200x1750 mm
Donanım/Aksesuarlar:
- Ayarlanabilir destek masası
- Sac kaldırma aparatı
- Açılı dayanak
- Sac destek kolları
Hjdpfx Aoyv Nzcsggsff
- Ayak pedalı
Sizin için aramayı kolaylaştırıyoruz: "manyetik plaka"
Yeni teklifleri hemen ve ücretsiz olarak e-posta ile alırsınız.
Arama görevini istediğiniz zaman kolayca sonlandırabilirsiniz.
Kullanılmış Manyetik Plaka (4.462)
Artık Machineseeker genelinde, 200.000’den fazla kullanılmış makineyle arama yapın.En popüler makine adlarını inceleyin:
- Elektromanyetik Plaka
- Manyetik Ayırıcı
- Manyetik Bant
- Manyetik Davul
- Manyetik Karıştırıcı
- Manyetik Sıkma Plaka
- Mech Plaka Kesme
- Nervürlü Soyunma Plaka
- Nervürlü Tuvalet Plaka Mühürler Masası






































































































































