Buhar türbini

Nouvo Pignone ENK 32/45

Durum: yeni, Üretim yılı: 2024, Fonksiyonellik: tamamen fonksiyonel, basınç: 16 bar, giriş frekansı: 50 Hz, giriş akımı türü: trifaze, sıcaklık: 400 °C, giriş voltajı: 6.000 V, dönme hızı (dk.): 1.500 dev/dak, dönüş hızı (maks.): 1.500 dev/dak, soğutma tipi: hava, Industrial Steam Turbogenerator Howden – model KK&K TWIN CA46, NEW, never installed and never commissioned, still covered by manufacturer’s warranty. Following a long-term industrial strategy review, a Howden KK&K TWIN CA46 steam turbogenerator, fully equipped as per original OEM supply, is available for sale. The machine is NEW, fully manufactured and tested at OEM level, but has never been installed or put into service. It is still covered by the manufacturer’s warranty and is stored indoors in a controlled environment. Immediate availability eliminates the standard production lead times for this type of equipment, which are typically 24–36 months. Main supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Double-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless design, suitable for parallel operation with the grid Included systems: - Integrated oil system in base frame - Main mechanical oil pump and auxiliary electric oil pump - Local control panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and condition: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned Podpfsyidvdsx Ag Topw - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning with manufacturer support available Possible applications: - Biomass and waste-to-energy plants for production of electricity and process steam, immediate unit availability without multi-year production wait times - Industrial cogeneration (CHP) in plants with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping/repowering of existing plants as a fast-track alternative to new OEM supply with 24–36 month lead times Price: upon request. Further technical information and documentation available on request.

Üretim yılı: 1995, durum: ikinci el, Basınç 125 t Strok 10-80 mm Strok hızı 240 strok/dak Koç ayarı 80 mm Masa alanı 850x600 mm Ram alanı 760x550 mm 850x130 ayarlanabilir mm tablada açılır kapanır açıklık Masa yüksekliği 1100 mm Koç Ø 50 mm'de gömme Toplam güç gereksinimi kW Makine ağırlığı yaklaşık 13 t Yer ihtiyacı yaklaşık GxDxY: 3000x2000x3300 mm Psdpfx Agolp U Nqe Tjpw Pnömatik debriyaj-fren kombinasyonu Manuel koç ayarı Manuel kaldırma ayarı Makine numarası: 212341 Merkezi yağlama Makaralı besleme Alba GVHY300 Düzleştirici Soprem BRM 19/150/16/U

Durum: mükemmel (kullanılmış), Motorlu NC döner tabla Kademesiz döner tabla (adım 0.001 °) Ekli palet istasyonu: palet değiştirme tablası (2 palet) Üretici: Rückle Tip: PKTF 1200 Tabla ölçüsü: 1200 mm x 1200 mm Toplam yükseklik: 660 mm Merkezleme deliği: 100 H6 mm Sıkıştırma olukları: 7 adet Yuva boyutu: 22 H7 mm Yuva mesafesi: 160 mm Yer değiştirme ROD 250 döner kodlayıcı ile ölçülür. Durum: Çok iyi (kullanılmış) İsteğe bağlı olarak makine yatağıyla (seyahat = 2000 mm) Hakkımızda: MBM Maschinenservice & Gebrauchtmaschinen GmbH, SHW takım tezgahları için ücretsiz bir uzmandır. Ana odak noktamız takım freze tezgahlarıdır. Hizmetlerimiz arasında yedek parça temini, yerinde müşteri hizmetleri, makine revizyonları ve kontrol modernizasyonu bulunmaktadır. Hizmetler: - Kullanılmış makineler - yedek parçalar - satış sonrası servis - makine servisi - makine revizyonları - kontrol modernizasyonu Psdpfx Aefk R Tdsg Tepw

Durum: ikinci el, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING/MILLING SPINDLE - X-axis travel: 350 mm - Y-axis travel: ±80 mm - B-axis swivel range: 270° - Minimum B-axis resolution: 0.001° - Tool holder type: HSK-T40 - Spindle speed: 18000 rpm - Spindle drive power: 11 kW - Fixed tools on electric spindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE Ppsdjv Ig Avepfx Ag Tow - Y-axis travel: ±80 mm - B-axis swivel range: 270° - Minimum B-axis resolution: 0.001° - Tool holder type: HSK-T40 - Spindle speed: 18000 rpm - Spindle drive power: 11 kW - Fixed tools on electric spindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bar loader - Number of tools in magazine: 80 - Tool change time: 4.5 s ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 68 kW DIMENSIONS AND WEIGHT - Machine height: 2500 mm - Machine weight: 11000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning/milling spindle hours: 9,713 h EQUIPMENT - Control: Siemens Sinumerik 840D SL - Coolant tank * With high-pressure pump * With paper filter * Internal coolant supply (IKZ) - Chip conveyor - Spindle cooling - Workpiece removal

Durum: yenilenmiş (kullanılmış), BSTA 110H, BBV 202/120 beslemeli Ppjdpfx Agsizi Hmo Tow Mekanik olarak revize edilmiştir. CE dönüşümü mümkündür. Teklif için bizimle iletişime geçin. Arşiv fotoğrafı

Üretim yılı: 1996, durum: mükemmel (kullanılmış), Orta gerilim panoları metal kaplı hava yalıtımı - Un=6kV 1250A 40kA, ABB tarafından üretilmiştir, rv 1996, tip SR7 / 2, ABB devre kesicinin VD4 bileşenleri, SPAJ korumaları, SPAU ABB, kontrol gerilimi 220VDC, tamamen işlevsel, çok iyi durumda. 2 adet voltaj ölçümlü giriş, 2 adet pano voltaj ölçümü, 6 adet çıkış panosu, 1 adet kaplin (2 alan) toplam 12 alan Pedsg Ur Nfopfx Ag Tspw

Durum: yeni gibi (kullanılmış), Üretim yılı: 2015, nominal güç: 1.300 kW (1.767,51 bg), dönme hızı (dk.): 1.493 dev/dak, dönüş hızı (maks.): 1.493 dev/dak, giriş voltajı: 6.000 V, giriş frekansı: 50 Hz, toplam ağırlık: 6.100 kg, 1 asenkron elektrik motoru Üretici: Reform Elektromotorenbau GmbH Tür: Y2-500-4 Güç: 1300kW Hız: 1493 dev/dak Voltaj: 6000 volt Akım: 151.4 A cosΦ: 0,86 İzolasyon. Sınıf: F Frekans: 50 Hz Koruma sınıfı: IP55 Tasarım: Ayak (B3) Çalışma modu: S1 sürekli çalışma Podpfxev I Alye Ag Tjpw Ağırlık: 6100 kg Yapım yılı: 12/2015 Rulmanlar: NU228C3 / 6030C3 ve NU228C3 Soğutma: Hava Dalga yüksekliği: 500mm

Durum: mükemmel (kullanılmış), Üretim yılı: 2018, Fonksiyonellik: tamamen fonksiyonel, delme derinliği: 1.600 mm, besleme uzunluğu X ekseni: 3.000 mm, y ekseni ilerleme uzunluğu: 2.100 mm, Z ekseni ilerleme mesafesi: 1.500 mm, toplam ağırlık: 50.000 kg, X ekseni ilerleme hızı: 10.000 m/dak, Y ekseni ilerleme hızı: 10.000 m/dak, Z ekseni ilerleme hızı: 10.000 m/dak, maksimum mil hızı: 4.500 dev/dak, matkap çapı: 40 mm, masa uzunluğu: 2.100 mm, masa genişliği: 1.900 mm, CNC Heidenhain iTNC 640 AXES MOVEMENT Maximum drilling depth in a single operation, V-axis: 1,600 mm Table travel, horizontal movement X-axis: 3,000 mm Vertical movement Y-axis: 2,100 mm Column approach movement (milling), Z-axis: 1,500 mm Tilting of drilling slide (resolution 0.001°), A-axis: +30°/-15° Table rotation (resolution 0.001°), B-axis: 360° Maximum feed rate: 10,000 mm/min DEEP HOLE DRILLING AND MILLING SPINDLE ISO 50 Solid drilling section: 5 - 25 mm Maximum drill bit diameter: 40 mm Adjustable spindle speed: 1 – 4,500 rpm Spindle power S1: 17 kW Spindle torque: 324 Nm Standard tool holder for drilling: Ø 25 x 70 mm Maximum internal spindle pressure: 120 bar Taper type: ISO 50 DIN 69871/A Coolant system: YES ROTARY TABLE Rotary table dimensions: 1,900 x 2,100 mm Rotary table resolution (0.001°), B-axis: 360° Rotating table capacity: 20,000 kg T-slots: 22 mm OIL SYSTEM Hydraulic pump motor power: 4 – 7.5 kW Self-regulated oil pressure: 15 – 120 bar Self-regulated oil flow: 5 – 80 l/min Oil tank capacity: 800 – 1,000 L Cooled oil temperature: 25 – 32°C Filtration grade: 16 micron Ppjdpfx Asywnr Njg Tsw MACHINE DIMENSIONS AND WEIGHT: Width x Length x Height: 7,000 x 7,900 x 4,700 mm Machine weight: 50,000 kg DRILLING PERFORMANCE WITH GUN DRILL Maximum drilling depth: 1,600 mm Maximum rotation speed: 4,500 rpm Minimum drilling diameter: 6 mm Maximum drilling diameter: 40 mm THREAD CUTTING HEAD “IMSASISTEM” WORKING FEATURES Maximum rotation speed: 4,500 rpm Maximum threading on C40 type steel: M36 Machine complete with: • Remote Heidenhain electronic handwheel • 40-position ISO 50 tool changer magazine • Fume extraction unit 4,000 m3/h • Air/oil through spindle • M24 clamping threads at the table • Many tools and workholding accessories • Tool rack with various drill bits • Operation and maintenance manual and CE conformity declaration

Durum: yeni, Fonksiyonellik: tamamen fonksiyonel, basınç: 26 bar, güç: 47 kW (63,90 bg), sıcaklık: 305 °C, Unused Howden 4.7 MW Steam Turbine Generator Set (Project Cancelled) Ppodszcx U Dspfx Ag Tjw

Durum: mükemmel (kullanılmış), Üretim yılı: 2007, • Maximum possible drilling depth: 1200 mm • Maximum hole diameter: 32 mm • Minimum drilling diameter: 6 mm • Longitudinal travel (X-axis) table: 1800 mm • Transverse travel (Z-axis) column: 1,700 mm • Transverse travel (W-axis) drilling head: 1150 mm • Vertical travel (Y-axis) drilling head: 1200 mm • Clamping area NC table: 1500 x 1000 mm • Max. table load: 10 t • Rotary axis (B-axis) rotary table: 360° • Rotary axis (A-axis) drilling head: -25°/+15° • Feed rate: 1-15 m/min (Y-axis: 1-10 m/min) • Rapid traverse speed on all axes: 15 m/min (Y-axis: 10 m/min) • Maximum spindle speed: 6000 rpm • Minimum spindle speed: 60 rpm • Tool holder: SK 40 Ppedpfjxyf E Nsx Ag Tew • Tool clamping: OTT • Rated main drive power (100% ED, S1/40% ED, S6): 9/13 kW • Coolant tank capacity: 1000 l • Maximum coolant pressure: 100 bar • Low-pressure external and high-pressure internal cooling • Power supply: 3x 400 V; 50 Hz • Required space (L x W x H): 6550 x 5350 x 4130 mm • Machine weight: 12000 kg Deep hole drilling machine equipment • CNC control: HEIDENHAIN iTNC 530 • Interpolated rotary table with limited backlash, dimensions 1500 x 1000 mm • Swiveling drilling head +15°/-25° • Shank drilling head • Handwheel HR520 • Fixed supports (2 pieces) • Tool magazine: ELB tools 12 pieces (max. diameter: 32 mm / max. length: 1550 mm) Standard tools 12 pieces (max. diameter 140 mm / max. length: 400 mm) • Direct measuring and travel control system on X, Y and Z axis • Collision monitoring system for supports and drilling sleeves • Oil cooler • Coolant flow control system • Adjustable coolant nozzles • Cooling unit for control cabinet • Enclosed upper cover (roof) • Drip tray for machine and tank system (tray height 30 mm) • Extraction system • Infrared measuring probe • Drilling depth extension 1,200 mm (retrofit) • Chip conveyor