CNC torna ve freze merkezi
Okuma Mac Turn 550 W

Name: Okuma Mac Turn 550 W
Brand: Okuma
Availability: InStock

Üretim yılı

2005

Koşul

Kullanılan

Konum

Biebrich

CNC torna ve freze merkezi Okuma Mac Turn 550 W

Haritayı göster

Makineye ait bilgiler

Makine tanımı:: CNC torna ve freze merkezi

Üretici:: Okuma

Modeli:: Mac Turn 550 W

Üretim yılı:: 2005

Koşul:: iyi (kullanılmış)

Fiyat ve Konum

Konum:: Biebrich, Almanya

Çağrı

Teklif detayları

Liste kimliği:: A21491247

Son güncelleme tarihi:: 22.04.2026

Açıklama

The machine has been serviced annually under a maintenance contract with Okuma.

Okuma Mac Turn 550 W / 9-axis turning-milling center
Year of manufacture: 2005
Control: OSP-E 100 L / extension kit “M” Kit One Touch IGF
Milling spindle slide X/Y/Z/B
Sub-spindle W axis
Main spindle with C axis
Sub-spindle with C axis
Lower turret slide X/Z axis
Max. turning diameter: 720 mm
Turning length: 2,000 mm
Distance between tailstock and spindle nose: 2,505 mm
Y axis: 250 mm / +/- 125 mm
Main spindle speed up to 3,500 rpm
Spindle power: 30 kW
Lower turret with 12 positions, without driven tool stations
Lower turret with steady rest, thus only 9 positions instead of 12
Self-centering steady rest 35 - 240 mm
Ppedpoyt Nvtjfx Ambsr
Milling spindle stepless B axis 0.001°
Magazine for 80 tools
HSK 100 interface
New Forkhart 3-jaw chuck, Ø 400 mm, valued at €12,000
Sub-spindle currently with mandrels, supplied without mandrels
Enlarged main spindle, 110 mm, Ø 150/110 mm
Spindle nose size 11
2-stage clamping pressure
Sub-spindle as hollow-shaft motor, speed up to 3,800 rpm
Ethernet LAN interface
Renishaw in-process measurement
Additional measuring system for Y axis
Tool length 450 mm instead of 350 mm
Automatic doors for both doors
Chip conveyor
Gravity band filter with clean tank 900 liters
Frequency-controlled supply pump up to 20 bar

The machine has been serviced annually under a maintenance contract with Okuma.

In 2023, the cable carrier of the W axis, including all hoses, was replaced.
In October 2024, the linear guides for X/Y/Z were renewed.
The performed work was carried out by Okuma:
- Machine cleaned
- Sheet metal and covers disassembled
- 8-axis removed
- Gantry column dismantled and lifted out of the machine. ATC dismantled and removed from the machine
- All linear guides removed
- Mounting surfaces of the ZA axis cleaned
- New ZA axis linear guide, including carriages, installed and tightened to the specified torques
- New ZA axis ball screw, including bearings, installed
- Base plate of the gantry installed and tightened to specified torques or screwed to the carriages. Lubrication lines connected
- ATC, including attachments, installed and connected
- New YA and XA linear guides installed and tightened to the specified torques. New YA axis ball screw, including bearings, installed
- Gantry column installed and lubrication lines connected. XA base plate positioned and aligned
- 8-axis mounted and aligned
- H1 turret installed
- Drive motor for the 8th axis mounted
- Assembly of 8th axis and new H1 as well as geometry setting
- Function test of 8th axis and H1
- Run-in program for B-axis approx. 12h, after which old oil removed from the 8th axis
- Run-in program for H1 and defect report for OEG created
- Left door installed, various sheet metal parts adjusted
- Chuck installed
- Adjusted zero points
- Checked tool change

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.

Tedarikçi

Beri kayıtlı: 2002

65 çevrimiçi ilan

Çağrı

İstek gönder

Telefon & Faks

+49 6486 ... ilanlar

Faks:

Bu reklamlar da ilginizi çekebilir.

Küçük ilan

CNC torna ve freze merkezi Niles-Simmons N30/2500 MC

Almanya

2.357 km

CNC torna ve freze merkezi
Niles-SimmonsN30/2500 MC

Çağrı

Üretim yılı: 2002, Koşul: işlem için hazır (kullanılmış), İki işleme modülü ile, X ekseni: -50 ila 725 mm, Y ekseni: -200 ila 300/-250 ila 250 mm, hızlı hareket X-, Y-, Z-ekseni: 18/12/30 m/dak, kontrol: Siemens Sinumerik, sıcaklık aralığı: 5-40°C, akım türü/frekans: 3 PEN/50Hz, anma gerilimi: AC 400V, kontrol gerilimi: DC 24V, yardımcı gerilim: AC 230V, bağlantı gücü: 102kVA, anma akımı: 148A, anma akımı (hızlı): 148A, sigorta (yavaş): 160A, uzunluk: 8000 mm, genişlik: 3000 mm, yükseklik: 4000 mm, ağırlık: yaklaşık 17 ton, çalışma saati: yaklaşık 80.000 saat. Makine tamamen çalışır durumda, Z ekseni bilyalı vida (dolaşımlı mil) 2024 yılında yenilenmiştir, düzenli bakımlıdır. Dokümantasyon, pano, hidrolik ünite, filtre elemanları ve talaş konveyörü ile birlikte, yerinde inceleme mümkündür. Ppedpfxswbuyzj Ambsr

Detayları gör

Küçük ilan

Offenbach an der Queich

2.426 km

İç taşlama makinesi
VOUMARD400 CNC U2 L10 T2

Çağrı

Koşul: iyi (kullanılmış), Üretim yılı: 2014, Spindle speeds: 170 - 18,000 rpm Machine weight: approx. 7.5 t Installation space required: approx. 5.00 x 4.00 x 2.20 m --> Control retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm Swing diameter: 350 (500) mm Workpiece length: 300 (1,300) mm Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min --> Grinding feed speed: 0 - 9.99 m/min --> Infeed rate: 0 - 99.99 m/min --> Step infeed value during reversal: 0 - 0.999 mm Ppjdpsw Intasfx Ambjr --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min / R --> Grinding feed speed: 0 - 5 m/min / R --> Infeed rate: 0 - 99.99 m/min / R --> Step infeed value during reversal: 0 - 0.999 mm / Ø --> Workpiece headstock swiveling capability: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Traverse speed: 5 m/min --> Center height over workpiece table: 200 (300) mm --> Center height over grinding table: 330 (430) mm --> Workpiece spindle bore: 50 (70) mm --> Year of manufacture: 1988

Detayları gör

Küçük ilan

Wiesbaden

2.457 km

Dikey şerit testere
MössnerSSF 1050

Çağrı

Üretim yılı: 1984, Koşul: ikinci el, makine/araç numarası: 25 948, Boğaz: 485 bzw. 1050 mm silindir-Ø: 500 mm geçiş yüksekliği: 380 mm tablo boyutu: Arbeitstisch 780 x 800 mm testere kuşağı uzunluğu: ueber 2 Laufraeder 3920-4050 mm testere bant genişliği azami: 20 mm bant hızı: 15-940 m/dak motoru: 380 V, 4 kW yer gerekinceye: 950 x 2130 x 2100 mm ağırlık: 1740 kg Ppodpfx Asb N Eh Hember

Detayları gör

Küçük ilan

CNC torna ve freze merkezi DMG MORI NLX 2500 SY / 700

Westhausen

2.277 km

CNC torna ve freze merkezi
DMG MORINLX 2500 SY / 700

Çağrı

Koşul: iyi (kullanılmış), Üretim yılı: 2017, çalışma saatleri: 8.800 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: NL2561708843, milling sayısı: 2, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel distance X-axis mm: 260 Travel distance Y-axis mm: ±50 Travel distance Z-axis mm: 795 Max. turning length mm: 705 Max. turning diameter mm: ø 366 Max. swing over bed mm: ø 920 Max. swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool Magazine Number of tool stations: 20 Tool holder: BMT40 Max. speed driven tools rpm: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min/5 min/continuous) Rapid traverse rate: 30 Main Spindle Max. spindle speed rpm: 4,000 Spindle drive power kW: 18.5/18.5/15 (25%ED/50%ED/continuous) Max. torque Nm: 49 Sub-Spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11/7.5 (25%ED/continuous) Max. torque Nm: 22 Sub-spindle travel distance mm: 734 Coolant System Tank capacity liters: 366 Equipment Chip conveyor Signal beacon Machine operating time: Power-on hours: 19,393 Cutting time: 8,800 Rated power kVA: 48 Base Machine: Dimensions / Weight Length mm: 5,330 Ppedsyzxcgjpfx Ambsr Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360 The tools shown, driven tools, and both chucks are not included in the scope of delivery.

Detayları gör

Küçük ilan

CNC torna freze merkezi DMG CTX gamma 1250 TC

Almanya

2.357 km

CNC torna freze merkezi
DMGCTX gamma 1250 TC

Çağrı

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2009, Fonksiyonellik: tamamen fonksiyonel, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC Year of manufacture: 2009, used as a demonstration machine until 2011, in production since 2012 Ppodsw Hg Nlepfx Amber The machine can be inspected under power by appointment. Condition: Very good (high precision), immediately ready for operation. Spindle hours (as of August 1, 2025): 9,580 h The heart of the machine is the integrated travelling column with turning-milling spindle and interpolating B-axis. Basic machine data: * Partial hollow clamping device (hydraulic) * C-axis * Upper cross-slide with turning/milling spindle as a motor spindle, with hydraulic clamping when turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct linear measuring systems on X, Y, and Z1 axes * USB interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Work area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Distance between spindle centers: 1,510 mm * Maximum bar diameter: 65 mm Main Drive I: * Drive power (100% / 40% duty cycle): 24 / 34 kW * Speed range: up to 5,000 rpm * C-axis speed: up to 5,000 rpm Turning-Milling Spindle: * Tool holder: Capto C6 * Spindle speed: up to 12,000 rpm * Drive power (100% / 40% duty cycle): 13.2 / 22 kW Tool Magazine: * Number of tools: 36 * Machine dimensions approx. (W/D/H): 6,860 x 4,220 x 2,530 mm * Total machine weight approx.: 18.5 t EQUIPMENT: Good equipment … * No steady rest * Complete documentation available No guarantee for completeness or correctness of the technical data and equipment. Detailed technical data sheet and further information on the equipment available upon request.

Detayları gör

Küçük ilan

Yüzey taşlama makinesi Ziersch GmbH ZT 820

Almanya

2.357 km

Yüzey taşlama makinesi
Ziersch GmbHZT 820

Çağrı

Üretim yılı: 2008, Koşul: işlem için hazır (kullanılmış), Zımparalama aralığı: 2000x900mm, enine hareket: 875mm, boyuna hareket: 2450mm, tabla ile iş mili merkezi arasındaki mesafe: 845mm, manyetik sıkıştırma plakası boyutları: 2000x800mm, maks. tabla yükü: 2.3t, ilerleme hızı boyuna eksen: 1000-30.000mm/dak, ilerleme enine eksen: 0.01-2000mm/dak, ilerleme dikey eksen: 0.001-1500mm/dak, taşlama taşı boyutları: 500x100x203.2mm, taşlama mili motor gücü: 22kW, uzunluk: 6800mm, genişlik: 3450mm, ağırlık: 13t. Yerinde inceleme mümkündür. Ppedpfxeuyk N Io Amber

Detayları gör

Küçük ilan

Almanya

2.445 km

Soğuk haddeleme makinesi
EXCELLOXK 875

Çağrı

Küçük ilan

Cnc torna tezgahı Mazak Slant Turn 40 MC

Schlüchtern

2.382 km

Cnc torna tezgahı
MazakSlant Turn 40 MC

€5.500

Başlangıç fiyatı KDV dahil değil

Çağrı

Küçük ilan

İşleme merkezi - yatay DECKEL DMC 80 H duoBLOCK

Almanya

2.394 km

İşleme merkezi - yatay
DECKELDMC 80 H duoBLOCK

Çağrı

Koşul: ikinci el, Üretim yılı: 2006, Teknik detaylar: x-yolu: 800 mm y-yolu: 800 mm z-yolu: 800 mm Hız: 12.000 1/dak Takım tutucu: SK 50 Kontrol: SIEMENS 840D atölye değirmeni Takım değiştirme cihazı: 240 kez Palet boyutu: 630 x 630mm mm İş Mili: 52 kW / 430Nm Toplam güç gereksinimi: 87 kVA Makine ağırlığı yaklaşık: 15 ton horiz. Palet depolu işleme merkezi, NC döner tabla, 2 katlı palet değiştirici, IKZ 40 bar, Renishaw MP 10 kızılötesi ölçüm probu için hazırlık, probsuz, Takım kırılması izleme mekanizması, Ppedpfx Amopumdceber MQL, İş mili merkezinden hava üfleme, Yağ buharı çıkarma el, el. el çarkı, TRANSMIT işlevi, doğruluk paketi, BA 4, lamine cam bölmeli sağ kapı, Kurulum istasyonu, depolama ve geri alma makinesi, ana bilgisayar ve 10 palet dahil olmak üzere toplam 14 palet için FASTEMS FPC 1000 palet istasyonu dahil yaklaşık 98.500 çalışma saati ana şalter AÇIK yaklaşık 45.500 iş mili saati *

Detayları gör

Küçük ilan

CNC torna ve freze merkezi MAZAK INTEGREX e-650H II

Almanya

2.357 km

CNC torna ve freze merkezi
MAZAKINTEGREX e-650H II

Çağrı

Koşul: işlem için hazır (kullanılmış), Üretim yılı: 2009, Fonksiyonellik: tamamen fonksiyonel, CNC Turning and Milling Center (Multi-Function Machine) | Make: MAZAK Model: INTEGREX e-650H II | Year of manufacture: 07/2009, Commissioning: November 2009 The machine can be inspected under power by appointment. Condition: Fully functional / operational. Operating hours (as of 10.03.2026): - Total: 91,430 h - Automatic operation: 52,054 h - Automatic machining: 38,974 h - Manual machining: 31,316 h TECHNICAL DATA: Working area: - Max. swing diameter: 920 mm - Max. swing diameter over tool slide: 920 mm - Max. turning diameter: 1,100 mm Main spindle: - Max. speed: 1,600 rpm - Min. speed: 35 rpm - Spindle bore: 260 mm (1,000 rpm) - Spindle nose: A2-11" - Spindle bearing inner diameter: 220 mm - Rated power (30 min duty / 100% continuous duty): 45.0 / 37.0 kW - Max. torque: 4,500 Nm Tailstock (programmable): - Taper: MK 6 Milling spindle: - Turret type: Single spindle with ATC Pjdpfx Ajyuq Dzsmbepr - Tool shank: ISO taper 50 - Max. tool diameter: 260 mm - Max. tool length: 500 mm - B-axis index increment: 0.0001° - B-axis positioning for turning - Min./max. milling spindle speed: 35 - 10,000 rpm - Milling spindle motor, AC: 37 kW Travels: - X-axis: 1,025 mm - Y-axis: 650 mm - Z-axis: 6,423 mm - B-axis swivel range: 240° Dimensions: - Spindle center height: 1,350 mm - Length: 13,267 mm - Width: 3,938 mm - Height: 3,920 mm - Weight: 41 t Additional information: - Rated power (100% continuous duty): 99.5 kVA Automatic tool changer: - Number of tools: 120 positions, SK50 DIN 69871 EQUIPMENT / SPECIAL FEATURES: - Numerical control: MAZATROL MATRIX - Further high-quality special equipment ... - Documentation - CE marking No guarantee for the completeness and accuracy of the technical specifications and equipment. - Subject to prior sale - A detailed technical data sheet and information on equipment are available on request.

Detayları gör

Burada reklam verin