Uzatılabilir tekstil havai konveyör

P.E.P.

Durumu: kullanılmış, Üretim yılı: 2008, makine/araç numarası: ET226, Machine overview Automatic inline self-adhesive labeling machine, equipped with two self-adhesive application stations for front and back labeling. The system conveys containers in a linear path and ensures positive product control via an integrated spacing device, a wrap/roll unit, and a top hold-down counter belt. At the machine’s exit, a special smoothing system guarantees optimal adhesion and finish of the label. The device is suitable for medium to large containers between 1 and 10 liters, and was completely overhauled in 2022 to extend its service life and reliability. Designed and built by P.E., model PACK LAB, year of manufacture 2008. Technical specifications Configuration: Linear labeler with 2 self-adhesive stations Labeling method: Self-adhesive labels Label placement: Front and back (single or dual application) Optical alignment: Not equipped (mechanical guidance and product handling) Container range: 1–10 L containers (typically rigid bottles/cans with stable base) Product handling: Container spacing device, wrap/roll unit, top hold-down counter belt Discharge: Label smoothing system at machine exit Protection class: IP54 (machine and electric motors) Year: 2008 | Refurbished: 2022 Productivity: 6,000 containers/hour Automation & Control Control architecture: Industrial PLC-based control with 24 VDC auxiliaries for machine logic Power distribution: 400 V ±5%, 50 Hz, 3P + N + PE (neutral and separate protective earth) Instrumentation supply: 24 VAC / 230 VAC Operator interface: HMI with recipe/format management and station status (typical for this series) Sensors and interlocks: Safety interlocks, product presence monitoring, and label application monitoring Line integration Hnsdpfoyhcgzjx Acvoh Infeed control: Integrated spacing module stabilizes product spacing before labeling Product stabilization: Top hold-down counter belt and wrap/roll unit for precise label placement Discharge quality: Smoothing/pressing elements at the exit to ensure adhesion and finish Mechanical interface: Linear conveyor, suitable for integration into existing filling/packaging lines Utility interface: Standard industrial electrical connections as specified below; no optical alignment required Condition & Maintenance Modernization: Comprehensive overhaul in 2022, including inspection of application stations, drive components, belts/rollers, safety devices, and electrical sections Preventive maintenance: Routine maintenance of label unwind assemblies, rollers, belts, and sensors recommended according to operating hours and label materials Spare parts: Standard wear components, easy to maintain for long-term support Performance & Versatility Applications: Front and back labeling on a wide variety of rigid containers in the 1–10 L segment (e.g. food, beverage, household/industrial products)

Durumu: kullanılmış, Çift şaftlı öğütücü Hnedpexgtcvofx Acvsh Sürücü 37,50 kW

Durumu: kullanılmış, Üretim yılı: 2005, Fonksiyonellik: tamamen fonksiyonel, Tam işlevsel makineler ayrı olarak satılmaktadır: dolum makinesi, etiketleme makinesi, shrink fırını, kulplar, streç sarma makinesi. Hnjdpfow R Tgdsx Acvoh

Durumu: yeni, dingil konfigürasyonu: 3 dingil, yükleme alanı hacmi: 35 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.940 mm, Üretim yılı: 2026, Donanım: ABS, O.ME.P.S Silo Trailer----Type: CM 35 Axles and Suspension: Disc brakes 22.5" SAF axle assemblies, 3x 9t with air suspension; axle spacing 2 x 1310 mm; lift and lower valve; loading pressure gauge mounted on top of the tank; Wabco Smartboard; Wabco tire pressure monitoring system; first axle liftable, without tractor equipment, third axle liftable with Wabco Optiturn Rims and Tires: 6 wheels with tires size 385/65 R22.5, manufacturer’s choice, mounted on Alcoa Ultra One aluminum rims, 11.75x 22.5 ET 120 Braking System: Hnedpfx Ajx Nuf Hecvsh EBS 4S/2M WABCO pneumatic braking system with RSS, compliant with standard 98/12/EC - ECE R13/09; brake wear indicator connected Landing Gear: Mechanical landing legs with two speeds, 2x 20t static load with pivoting foot Electrical System: All lights in LED design, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the saddle plate on the frame, yellow side marker lights as required, rear position lights, front marker lights, rear license plate lights, all compliant with standard 97/28/EC-2007/35/EC, two multi-chamber rear lights at the turntable mounting, in aluminum brackets (compliant with 97/28/EC-2007/35/EC), two rotatable LED work lights top left and right of the tank, yellow warning beacon at the rear near the hose tubes, 2x reversing lights on the underrun protection, 2x reversing lights near the landing legs (each switchable from the energy console) Tank Construction: Horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank, 35,000 liters volume, 24 months tank warranty from delivery, 2" kingpin as per standard 94/20/EC Operating Parameters: Pressure vessel per Pressure Equipment Directive PED 97/23/EC; wall thickness approx. 5 mm; test pressure 3.0 bar – operating pressure 2.0 bar; operating temperature -40° to +80° Filling Options: 3 manholes DN 450 with swing and folding dome covers; each cover sealed pressure-tight with 4 wing nuts; support for dome covers on top for storage; closed rain deflector at front, open at rear Material Discharge: 2 material discharge cones with synthetic fabric loosening inserts; individual discharge pipelines DN 100, steel, routed to the rear; 2 pinch valves DN 100 AKO in the pipes; DN 100 ball valve with ring jet nozzle at the end; remote control for ball valve and Storz A coupling at the end of the discharge line Air Piping: A 2.5" stainless steel air distribution pipe mounted on the right operating side; air line routed to the front, up to end of silo with check valve and DN 65 connection hose for compressor with Storz B coupling; the air distribution pipe features ball valves for top air, auxiliary air, and loosening; top air 2" at rear right, PRESSURE INLET REAR RIGHT, external air connection Storz C at air pipe rear right; pneumatic connection with blow gun and spiral hose at upper walkway near climbing ladder; 1x vibrator on top of the tank; air line at walkway center top for cleaning with gun; air line in tool box below for cleaning with gun Ladder and Access Equipment: 1 aluminum ladder mounted at rear left of the vehicle; 1 pneumatic aluminum safety scissor railing with lock system acting on the brake; 1 aluminum safety walkway

Durumu: kullanılmış, Yuvarlak odun yongalama: 100-150 m3/saat Küçük atıkların ufalanması: 50-100 m3/saat Hnjdpfxohclffj Acvoh Ağırlık: 3165 kg Maksimum kütük çapı: 254 mm Söderhamn Eriksson 670-56 CC elektrik motorlu parçalayıcı. Söderhamn Eriksson 670-56 parçalayıcı, kağıt hamuru, lif levha ve sunta üretimi için talaş üretimi için tasarlanmıştır. Hem yuvarlak odun hem de kereste fabrikası atıkları hammadde olarak kullanılabilir. Chipper 670-56'nın beslemesi yataydır ve taneye 37,5 derecelik bir açı ile yapılır. Tutarlı yüksek kalitede yongalar alttan boşaltılabilir veya doğrudan yukarı doğru üflenebilir. Ellerindeki kaynakları akıllıca yöneten ahşap işleme şirketlerinden biri olun.

Durumu: yeni, yükleme alanı hacmi: 60 m³, toplam genişlik: 2.550 mm, toplam yükseklik: 3.930 mm, Üretim yılı: 2026, Donanım: ABS, OMEPS Tipping Silo Trailer----Type: CR 60 Chassis: Hnodpfxsx Nuf Te Acveh Two fully automatically welded I-beam longitudinal members with welded crossmembers, chassis width of 1,400mm, 2" kingpin, tipping cylinder: Hyva Axles and Suspension: 22.5" disc brakes, SAF axle assemblies (3x 9t) with air suspension, axle spacing 2 x 1310 mm, lifting and lowering valve, load gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels fitted with 385/65 R22.5 tires, as per manufacturer's choice, on Alcoa Dura Bright alloy rims, size 11.75x22.5 ET 120 Braking System: EBS 4S/2M WABCO compressed air braking system with RSS, in accordance with standard 98/12/CE - ECE R13/09; brake wear indicators connected Landing Legs: Mechanical landing legs with two speeds, 2x 20t load capacity with swivelling feet, rear crank support legs Electrical System: All lights are LED versions, 24V electrical installation comprised of: one 15-pin socket mounted in front of the saddle plate on the chassis rail, yellow side marker lights in required quantity, rear position lights, front marker lights, rear license plate lights, lighting as per 97/28/CE-2007/35/CE standard, 2 multi-chamber rear lights on aluminum brackets at the rotary bearing as per 97/28/CE-2007/35/CE standard, 1 LED work lamp on the tank, yellow warning beacon at the rear, installed at hose pipe height, 2x reversing lights in underrun protection, 2x reversing lights at the height of the supports (each can be deactivated at the power console) Tank Design: Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank, 60,000 liters capacity, tank warranty: 24 months from delivery Operating Parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° Filling Options: 5 manholes DN 450 with pivoting and folding domed covers. Each dome cover sealed pressure-tight with 4 wing nuts, rubber support for dome cover storage above, front rain gutter closed, rear open Material Discharge: 1 material outlet cone DN 800 made of stainless steel (INOX), foldable with INOX disc for loosening, discharge cone swingable to the side, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: One 2.5" stainless steel air distribution main installed on the operating (right) side, one 4" stainless steel air distribution pipe mounted at the rear of the tank, air valves (shut-off valves) in INOX, top air hose and air connection hoses with 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1m in front of the rotary bearing Ladder and Walkway: 1 aluminum ladder installed at the rear left of the vehicle, 1 aluminum safety scissor guardrail which can be erected from below with a separate folding ladder section, fixed with park brake when open, 1 aluminum safety walkway runs along the top left of the tank, anti-slip coating on the tank Discharge Hose Storage: 4 hose tube containers, 5 m long, DN 200 made of aluminum, with 4 hoses DN 100 and STORZ couplings, hose container for compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum version

Durumu: yeni, toplam genişlik: 2.550 mm, toplam yükseklik: 3.960 mm, Üretim yılı: 2026, Donanım: ABS, O.ME.P.S Tipping Silo Semi-Trailer----Type: CR 47 Chassis: Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400 mm, kingpin 2", tipping cylinder: Hyva Axles and Suspension: Disc brakes 22.5" SAF axle aggregates 3x 9t with air suspension, axle distance is 2 x 1310 mm, raise and lower valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels with tires size 385/65 R22.5, manufacturer’s choice, on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, according to standard 98/12/EC - ECE R13/09, brake wear indicator connected Landing Gear: Mechanical landing gear with two speeds, 2x 20t support load with swing foot, rear without additional support Electrical System: All lights in LED design, 24-volt electrical installation consisting of: one 15-pin socket mounted ahead of the fifth wheel on the chassis beam, yellow side marker lights in prescribed quantity, rear position lights, front clearance lights, rear license plate lights, lights according to standard 97/28/EC-2007/35/EC, 2 multi-chamber rear lights mounted at turntable height in aluminum consoles to standard 97/28/EC-2007/35/EC, 1 LED work light on the tank, yellow warning light at rear mounted at hose tube height, 2x reverse lights in underrun protection, 2x reverse lights at landing gear height (each switchable on the power console) Tank Assembly: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn) manufactured A single-compartment tank with a volume of 47,000 liters, tank warranty: 24 months from delivery Operating parameters: pressure vessel according to Pressure Equipment Directive PED 97/23/EC. The wall thickness is approx. 5 mm, test pressure 3.0 bar - operating pressure 2.0 bar, operating temperature -40° to +80° Filling Options: 4 manholes DN 450 with pivoting and folding dome lids. Dome lids are pressure-tight with 4 wing nuts each, rubber supports above for dome lid storage, drip edge closed at front, open at rear Material Discharge: 1 material discharge cone DN 800 made of INOX, foldable with INOX disc for loosening, discharge cone swivels to the side, shut-off valve DN 150 with white gasket, connection: STORZ-A Pneumatic Piping: A 2.5" stainless steel air manifold mounted on the right operating side, a stainless steel air distribution pipe 4" mounted at the rear of the tank, air valves (shut-off flaps) in INOX, air supply and connecting hoses in 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the turntable Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail operable from below with separate folding ladder section, equipped with parking brake when open, 1 aluminum safety walkway led along the left top of the tank, anti-slip coating on the tank Hose Carriage: Hjdpfx Acox Nufmovjnh 4 hose tube compartments 5 m length DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose compartment with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum design, left

Durumu: yeni, Uzunluk 1900 mm Genişlik 810 mm Yükseklik 860 mm İç boyutlar (UxGxY) 1,5 x 0,74 x 0,78 m Makine ağırlığı yaklaşık 200 kg Yer gereksinimi yaklaşık 1,9 x 0,81 x 0,86 m Dökme malların ve endüstriyel atıkların toplanması ve bertarafı için - boşaltma kabı - dökme yüklerin dahili depolanması için forklift ataşmanları - standart renkte toz boyalı: RAL 5010 mavi, RAL 6011 yeşil veya RAL 7016 antrasit grisi / istek üzerine özel boya - döner ve sabit tekerlekler için taban plakalı devirme cihazı - drenaj cihazı - sabit taban geçmeli cepli çerçeve - daha ucuz Yük merkezi - Kenar takviyeli sağlam çelik sac yapı Tank hacmi: yaklaşık 600 l Hodpfxsgvqz Ij Acvenh

Durumu: yeni gibi (kullanılmış), Üretim yılı: 2019, çalışma saatleri: 454 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: 7438, delme derinliği: 3.000 mm, toplam uzunluk: 11.515 mm, toplam genişlik: 5.415 mm, toplam yükseklik: 2.350 mm, iş parçası ağırlığı (maks.): 2.500 kg, toplam ağırlık: 14.450 kg, mil hızı (dk.): 13 dev/dak, maksimum mil hızı: 1.800 dev/dak, hızlı ilerleme Z ekseni: 6.000 m/dak, giriş akımı türü: Klima, giriş voltajı: 400 V, Skiving parlatma makinesi, boruların iç yüzeylerini tek geçişte iki işlemi birleştirerek finisaj için kullanılır: malzeme giderme (skiving) ve yüzey sertleştirme/parlatma (rulo parlatma). Olağanüstü yüzey kalitesi sağlar (Ra 0,1–0,4). Boru sabitlenir ve takım döner. Bu makine derin delme, delik büyütme (boring) veya honlama işlemleri için kullanılamaz. Makine, çok az kullanıldığından (yalnızca 454 saat) mükemmel durumdadır. 40-50-63-80-90-100-110-140 mm çaplarında takım seti mevcuttur ve fiyata dahildir. İş değişikliği nedeniyle satılmaktadır. Hnjdpsxzq Ryofx Acvjh

Durumu: kullanılmış, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2004, çalışma saatleri: 6.597 h, yük kapasitesi: 5.000 kg, kaldırma yüksekliği: 4.450 mm, serbest kaldırma: 840 mm, yakıt türü: dizel, direk tipi: simpleks, inşaat yüksekliği: 3.250 mm, fork taşıyıcı genişliği: 1.260 mm, çatalların uzunluğu: 1.360 mm, boş ağırlık: 8.700 kg, toplam uzunluk: 4.600 mm, çekiş tipi: Diesel, inşaat genişliği: 2.200 mm, Yan yükleyici Yük ağırlık merkezi: 700 Çatal genişliği: 160 mm Çatal kalınlığı: 65 mm Direk tipi: Standart Hsdpfx Acewttrgovonh Durum: Kullanıma hazır ve tam fonksiyonel Teknik durum: çok iyi Ön lastik tipi: Havalı Ön lastik boyutu: 27x10-12 Arka lastik tipi: Havalı Arka lastik boyutu: 27x10-12 Açıklama: Bu Battioni Pagani modelinin yanı sıra, Hamburg ve Gdansk depolarımızda yaklaşık 200 ağır hizmet forklift, kompakt forklift, forklift ve yan yükleyici stoklarımızda mevcuttur. Web sitemizi ziyaret edin - sago-online. Avantajlı koşullarda kiralama ve finansman imkanı her zaman mümkündür. Ayrıca, herhangi bir araç satın almadan kullanılmış ekipmanınızı da nakit olarak memnuniyetle satın alıyoruz. Sahibimiz Bay Peter Sawitzki, bu HT5KU hakkında size detaylı bilgi vermekten memnuniyet duyar. Not: Forklift ana servis atölyemiz, 8 ton ve üzeri forkliftler için tamir, bakım, revizyon ve özel yapıda uzmandır. İsterseniz aracınızı bizde komisyonlu satış için de sergileyebiliriz. 1x NIVO çatal; teleskopik çatallar 1360 / 2360 mm Isıtma, tam kabin, Platform yüksekliği: 820 mm

Durumu: mükemmel (kullanılmış), Üretim yılı: 2015, Tamamen yenilenen Stravis kereste fabrikası hattı, Jabłoński otomatik kenar kesme makinesiyle donatılmıştır. Durumu: Yeni gibi. Bu çizgi şunları içerir: 1. Basamaklı besleyicili 5m kütükler için kütük konveyörü 2. Caterpillar-zincirli kereste fabrikası 110 + 90 kW 3. Çok bıçaklı testere (2 x 75 kW) mil çapı 80 mm 4. Sol yığının hareketini durdurma mekanizmasına sahip l- 6m'lik rulolu konveyör 5. 0,8 m'den 5 m'ye kadar çapraz kesim 6. Taban konveyörü 7. Rulolu konveyör l=3,5m 8. Tahrikli rulo konveyör 4,5 m 9. Tahrikli rulolu konveyör l = 4,0 m, tahta boşaltma mekanizması ile 10. Çapraz konveyör bant b=3m, l=5m 11. Bir pikaplı çapraz bantlı konveyör b=2m, l=5m 12. Uzunlamasına bantlı konveyör b=0,4m, l=5m 13. Jabłoński otomatik kenar kesme makinesi 14. Kaz boynu Jablonski 15. Tahta genişliğini ölçen tarayıcılı çapraz besleyici 16. Kenar kesici için merkezleme 17 17. Ofset ayırıcı Hjdpov Iyhfsfx Acvonh 18. 0,8 m'den 3,0 m'ye kadar düzeltici 19. Kaz boynu 20. Jabłoński otomatik istifleyici 21. Jabłoński yenilenmemiş çapraz kesici 22. Kontrollü Bruks parçalayıcı (kayış veya titreşimli oluk eklemeniz gerekir) Müşteri yerinde montaj ve devreye alma imkânı. Tadilat öncesi çalışma halindeki makinenin videolarını gönderme imkânı. Hattı dönüş veya uzunluğu boyunca ayarlama imkânı. Hat için opsiyonel bir taban inşası. FIRSAT

Durumu: yenilenmiş (kullanılmış), pil kapasitesi: 500 Ah, batarya voltajı: 80 V, toplam yükseklik: 627 mm, toplam uzunluk: 1.025 mm, toplam genişlik: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes aquamatic system + Includes end cable and REMA 320 connector (other connectors can be fitted on request) + Capacity: minimum 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLACH - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Hnedpfjwzvzysx Acveh Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - top battery exchange Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Common battery sizes available—please inquire. Delivery available.

Durumu: yenilenmiş (kullanılmış), pil kapasitesi: 620 Ah, batarya voltajı: 80 V, toplam yükseklik: 784 mm, toplam uzunluk: 1.025 mm, toplam genişlik: 708 mm, Tested forklift battery for your truck - 80V 4PZS 620AH - DIN A + 1-year warranty + Includes Aquamatic system + Includes end connector & REMA 320 plug (other plugs can be fitted on request) + Capacity: min. 90-100% (C5 capacity protocol supplied upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,150 mm Width: 708 mm Height: 784 mm Weight: approx. 1,600 kg Suitable for the following models and more: Linde E 20 - 325-00 Linde E 20 / 600 - 387-00 Linde E 20 / 600 H - 1252-01 Linde E 20 / 600 H - 387-00 Linde E 20 / 600 RH - 387-00 Linde E 20 H - 387-00 Linde E 20 HOCH - 325-00 Linde E 20 HOCH - 336-00 Linde E 20 P - 325-00 Linde E 20 Z - 325-00 Linde E 25 - 325-00 Linde E 25 - 336-00 Linde E 25 - 387-00 Linde E 25 / 600 - 387-00 Linde E 25 / 600 H - 1252-01 Linde E 25 / 600 H - 387-00 Linde E 25 / 600 RH - 387-00 Linde E 25 CH - 387-00 Linde E 25 H - 387-00 Linde E 30 CH - 387-00 Linde E 30 H - 387-00 Linde E 30 P - 325-00 Linde E 30 SH - 1276-00 Linde E 35 - 337-00 Linde E 35 - 337- Linde E 35 P - 337-00 Linde E 40 P - 337-00 Linde K - 5231-00 Linde K - 5231-00 - Side change Linde K 12 Linde K 15 Linde P 200 - 370-00 Linde P 250 - 127-00 - Vertical Change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - Side Change Linde P 250 SWB - 5007-10 - Vertical Change Still MX-X Still R. 07-25 Still R 60-20 Still R 60-22 Still R 60-25 Still RX 60-25 Still RX 60-30 Jungheinrich EFG 25 Jungheinrich EFG 425 Jungheinrich EFG 425 K Jungheinrich EFG V 25 Jungheinrich EKX 515 Jungheinrich EKX 515 K Jungheinrich EKX 525 K Jungheinrich ETX Toyota 7FBMF20 Toyota 7FBMF25 Toyota 8FBMKT25 Toyota 8FBMKT30 Toyota FBM25 Toyota FBMF20 Toyota FBMF25 Crown TSP 6000 - B Crown TSP 6000 - C Crown TSP 7000 Atlet EH 25 Balkancar EV715 Balkancar EV720 Clark GEX25 Heli CPD 30 Heli CPD 35 Hubtex MQ 40 Hnedpfxowzvy Nj Acvsh Hyster E5XN Hyster J2.0 Hyundai 25BHA7 Mitsubishi FB25CN Nissan 1Q2L25Q Nissan QX25 Common battery sizes available – feel free to inquire. Transport possible.

Durumu: yenilenmiş (kullanılmış), Üretim yılı: 2005, Allgaier eleme makinesi | düz eleme makinesi tip ARSM 33-10 genel olarak elden geçirilmiş (atölyede elden geçirilmiş) - Marka: Allgaier - Tip: ARSM 33-10 - Üretim yılı: 2005 - Durum: elden geçirildi - Eleme kapasitesi: yaklaşık 200 - 220 srm/saate kadar (talaş ve talaş için) - Elek alanı: 10,0 m² x 2 = elek göz boyutu başına 20 m² - Kesirler: 3 - Ekran güverteleri: 4 adet + 1 adet ara kat - Tahrik gücü: 7,5 kW - U x G x Y: 7.000 x 3.540 x 2.700 mm - Makine ağırlığı: yaklaşık 8.000 kg - Makine rengi: RAL 6011 Reseda yeşili - Ekran ekleri serbestçe seçilebilir - Müşteri ihtiyaçlarına göre çıkışların tasarlanması Eleme makinesi tamamen elden geçirilmiştir. Oynak makaralı rulmanlar ve yay destekleri yenidir. Diğerlerinin yanı sıra aşağıdaki dökme malzemelerin elenmesi için uygundur: Hodpfx Ajq Iivaocvsnh - Ağaç yongaları - Talaş ve talaş - biyokütle - odun peletleri - Kömür - Atık odun - kabuk Titreşimli elek | Ağaç yongası eleği | Titreşimli elek makinesi | Stand eleği | Düz elek | Düz elek makinesi | Titreşimli elek | Rulo elek | Ağaç yongaları için eleme makinesi

Durumu: yenilenmiş (kullanılmış), pil kapasitesi: 775 Ah, batarya voltajı: 80 V, toplam yükseklik: 784 mm, toplam uzunluk: 1.024 mm, toplam genişlik: 852 mm, Tested forklift battery for your forklift - 80V 5PZS 775Ah - DIN A + 1-year warranty + Includes Aquamatik watering system + Includes end cable & REMA 320 connector (other connectors available on request) + Capacity: min. 90-100% (C5 capacity test report included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Weight: approx. 1,920 kg Suitable for the following models and more: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S-336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00/Hoch Linde E30P-325-00 Linde E30 SH-1276-00 Linde E35/600H-388-00 Hnjdpfxowzvxro Acvjh Linde E35 H-/HL-387-00 Linde E35 P-337-00 Linde E35 RHL-387-00 Linde E35 SH-1276-00 Linde E40-337-00 Linde E40 C-388-00 Linde E40 P-337-00 Linde E45/C/600H-388-00 Linde K 5231-00/sideways Linde P250-127-00 Linde P250L-127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB 35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Other standard battery sizes available, please inquire. Transportation available.