Balya makinesi

PAAL Likon 700

Technical specifications of the Nikon 700 horizontal automatic press with conveyor belt

Basic configuration and technical data:
Main components of the press
- 1 automatic channel baler PAAL LIKON 700G/S
- 1 automatic strapping device
- 1 hydraulic system
- 1 electrical control system

Press performance
- Pressing force at approx. 315 bar: 198 t (1,940 kN)
- Specific pressing force: 160 N/cm³
- Nominal throughput (idle): 725 m³/h
- Volumetric capacity at 35 kg/m³: 485 m³/h
- Drive power (motors): 2 x 55 kW
- Pump output: 2 x 420 l/min

Throughput based on bulk density:
• Density 15 kg/m³ (e.g. film) 6 – 15 t/h
• Density 35 kg/m³ (e.g. mixed commercial waste) 13 – 33 t/h
• Density 60 kg/m³ (e.g. mixed paper) 21 – 54 t/h
• Density 80 kg/m³ (e.g. mixed paper) 26 – 69 t/h
• Density 100 kg/m³ (e.g. commercial waste) 32 – 80 t/h

Press dimensions
- Length, width, height: see drawing
- Channel cross-section (H x W): 110 x 110 cm
- Feed opening (L x W): 200 x 102 cm
- Feed opening height: 3.45 m
- Number of binding wires: 5
- Bale weight: up to 1,300 kg
- Bale dimensions: 110 x 110 cm
- Bale length: adjustable

Hydraulics
Dkedexfmcaspfx Af Dou
- Hydraulic oil tank volume: 2,100 l
- System pressure: 315 bar
- Machine weight: approx. 44 t
- Operating voltage: 3 x 380–420 VAC / 50 Hz / N / PE
- Year of manufacture: 2012
- Operating hours: only 7,145 h
- Hardox steel liner plates in the press chamber
- Press feeding conveyor: PAAL chain conveyor type KES-1900

Technical data (conveyor):
- Conveyor width: approx. 1,900 mm
- Axle distance: approx. 16,000 mm
- Conveyor pathway: approx. 3.75 m horizontal below floor, then inclined at 30° over a length of approx. 9.18 m, then decline at less than 20° for the remaining length and feeding into the baler
- Conveyor speed: 0.29 m/sec
- Conveyor drive power: 5.5 kW

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.