Ekipman

Perkins PERKINS

Durumu: kullanılmış, Üretim yılı: 2023, çalışma saatleri: 5 h, yakıt türü: dizel, renk: mavi, güç: 10 kW (13,60 bg), kilometre: 5 km, Donanım: ek farlar, her tahrikli, kabin, kauçuk paletler, standart kepçe, Gekko Network KG in Gersthofen – Your supplier for vehicles of all kinds. You can reach us by phone, email, or in person.   Model: CX15CP   Technical Specifications:   Weight: 1,520 kg Bucket capacity: 0.025 m³ Bucket width: 380 mm Boom length: 1,560 mm Arm length: 793 mm Fuel tank capacity: 20 liters Hydraulic tank capacity: 13 liters Hydraulic system: Oil pump model DHP0010 Maximum oil pump pressure: 17 MPa Hydraulic pump flow rate: 28.5 l/min Performance: Rotational speed: 10 rpm Travel speed: km/h Gradeability: 25 % Ground pressure: 25 kN Bucket breakout force: 9.6 kN Boom digging force: 8.5 kN Engine: PERKINS, Rated power: 10.3 kW / 2,400 rpm, 14.7 kW / 2,200 rpm Maximum torque: 51.8 Nm Number of cylinders: 3 Air cooled Working Range: Max. digging radius: 3,225 mm Max. digging depth: 1,650 mm Max. digging height: 2,740 mm Max. dumping height: 1,970 mm Max. raised blade height: 170 mm Max. lowered blade depth: 220 mm Boom swing angle: 50° left / 70° right Dimensions: Wheelbase: 950 mm Track length: 1,290 mm Clearance: 405 mm Counterweight swing radius: 850 mm Width: 1,055 mm Track gauge: 180 mm Track height: 320 mm Length: 3,160 mm Height (without/with canopy): 1,570 / 2,200 mm Bledpfx Ajklwvcohxer Please note that some vehicles from our range may be located at our external storage facility and may not be available for immediate on-site viewing. Please contact us in advance in any case. Our complete range is available upon request. Construction equipment, other construction machinery Year of manufacture: 2021 Operating hours: 8 Emission sticker: -- Equipment: All-wheel drive Looking for other construction machinery or equipment? Feel free to contact us.

Durumu: yeni, Üretim yılı: 2023, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: HE-PG378-B/964/140917 - kogeneracja, toplam ağırlık: 26.100 kg, yakıt türü: gaz, çıkış akımı: 682 A, çıkış voltajı: 400 V, çıkış frekansı: 50 Hz, çıkış akım tipi: trifaze, sürekli (görünür) güç: 500 kVA, toplam uzunluk: 12.190 mm, toplam genişlik: 3.000 mm, toplam yükseklik: 3.300 mm, dönüş hızı (maks.): 1.500 dev/dak, motor üreticisi: Perkins, soğutma tipi: su, Gas / Biogas Power Generation Module / CHP HORUS type: HE-PG378-B with a turbocharged PERKINS 4006-23TRS2 engine (module); Year of manufacture: 2023 (according to the nameplate by the module manufacturer HORUS-ENERGIA Sp. z o.o.); At the Investor’s request and for an additional fee, the Module can be covered by a zero-hour inspection, warranty, and service provided by the manufacturer – HORUS ENERGIA Sp. z o.o. – for a period of 1 year or up to 8,000 operating hours, depending on the Investor’s preference. Rated output: 378 kW electric power (410 kW thermal power); Manufacturer of the complete module: HORUS-ENERGIA Sp. z o.o.; Module service history: (brand new); Engine runtime: 0 operating hours (brand new); The genset is currently located in central Poland; Bsdpfxow Ihudj Ahxelr The genset is installed in an enlarged 40 ft soundproof container; The container is divided into three zones: control room, engine room, and a section designed for parallel operation with a secondary power source; Equipment: standard setup for power and heat generation + MUZG controller (Gas Mixer Supply System) + ready for parallel operation with a secondary power source (i.e. shaft for input/output of mechanical power), Fuel: natural gas / LNG (after regasification), biogas (landfill, wastewater treatment plant, agricultural or industrial biogas plant), mine gas (methane drainage), (Methane content: 30 Vol.% < CH4 < 100 Vol.% – methane content within the range above 30% up to below 100% by volume.); Perkins – technical data sheet – in the link below; Manual + Operating and Maintenance Documentation (technical data) – available upon request after email confirmation of purchase interest; Photos of the genset + nameplate: see link below; The Gas / Biogas Genset / CHP is perfectly suited for operation as a prime or backup power source, for “island” operations in any type of enterprise, for example in CHP plants / heating plants, agricultural / landfill / industrial (wastewater treatment) biogas plants, mines extracting methane for energy purposes, industrial facilities for compressed air supply – in cooperation with compressor systems or as a generator for the power grid, in dairies, breweries, sugar factories, and in installations requiring fuel flexibility.