Balya presi

Presto HPK 50 BS

Koşul: mükemmel (kullanılmış), Üretim yılı: 2014, çalışma saatleri: 8.900 h, makine/araç numarası: LP50VH2, Used Presona LP50 VH2 baler in good working condition with conveyor belt Technical data: LP 50VH2 Theoretical volumetric capacity: 730 m³/h Maximum actual throughput under load: 340 m³/h Output depending on material bulk density: 30 kg/m³ = 7–9 t/h 50 kg/m³ = 8–9 t/h 100 kg/m³ = 11–14 t/h Hopper length: 1,500 mm Hopper width: 1,100 mm Filling chamber volume: 2.7 m³ Bale width: 1,100 mm Hodsyrhi Njpfx Ambol Bale height: 720 mm Bale length: adjustable Bale weight: 400–550 kg Number of vertical tying wires: 5 pcs. Press force: 50 t Specific pressure: 63 N/cm² Max. hydraulic pressure: 250 N/cm² Oil tank capacity: 600 l Motor power 400 V, 50 Hz: 1 x 45 kW Oil cooler: 1 x 1.5 kW Net weight approx.: 16 t Year of manufacture: 2014 2) Feed conveyor Conveyor type: Chain conveyor Year of manufacture: 2014 Specifications: Conveyor width: approx. 1,300 mm Length of horizontal section: 5,500 mm Length of inclined section: approx. 10,800 mm Conveyor weight: approx. 6 t Scope of delivery: Baler, control cabinet, operator panel, conveyor belt for sale. Documentation (operating manual, CE declaration, electrical/hydraulic diagram) is complete. Inspection by appointment is possible. No liability is assumed for technical information or potential errors. Video footage can be provided on request.

Koşul: yenilenmiş (kullanılmış), Üretim yılı: 2000, çalışma saatleri: 32.169 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 60 t, dolum açıklığı genişliği: 1.100 mm, dolum ağzı uzunluğu: 1.320 mm, balya genişliği: 1.100 mm, balya yüksekliği: 720 mm, balyanın ağırlığı: 750 kg, toplam ağırlık: 22.000 kg, yağ tankı kapasitesi: 900 l, For sale is a complete baling plant consisting of conveying equipment, baler (partially overhauled and tested), and wire stations. Technical Data – Baler: Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours as of November 2024 Main press force: 60 t Pre-press force: max. 25 t Feed chute dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Bale dimensions: 1,100 x 720 mm, length variable Drive motor power: 45 kW Total connected load: 60 kW Tying system: 5-fold vertical Throughput rates at a bulk density of: 30 kg/m³: approx. 5.5 t/hour 50 kg/m³: approx. 10 t/hour 100 kg/m³: approx. 16 t/hour Bale weights: 400 to 750 kg (depending on material) PLC control: Telemecanique TSX Micro Hodpfxsviwdme Ambol Machine weight (press): approx. 22 t Scope of delivery: 1 chain belt conveyor 1 Bollegraaf baler HBC 60A with shredder 1 maintenance platform with access ladder 2 wire stations with redirecting pulleys for 10 wire reel stands (without wire) The following repair and overhaul works have been carried out: - Hydraulic oil tank drained, cleaned and refilled with new oil - Oil filter and air filter replaced - Hydraulic block partially resealed - Hydraulic hose at hydraulic block replaced - Wire feed grooves in the floor passages welded and smoothed - Tying unit cleaned and serviced - Electrical system overhauled, some door/flap contact switches replaced - Shredder repaired - General maintenance carried out, greased - Machine tested in operation (without material), in manual and automatic mode – see function video Remarks: The plant has already been fully dismantled, is in storage, and available for prompt loading. Documentation (operating manual, CE, electrical/hydraulic schematics) is available. Inspection by appointment. Specifications provided without liability for technical data or possible errors.

Koşul: mükemmel (kullanılmış), Üretim yılı: 2015, çalışma saatleri: 20.331 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 100 t, dolum açıklığı genişliği: 970 mm, dolum ağzı uzunluğu: 1.800 mm, balya uzunluğu: 1.200 mm, balya genişliği: 1.100 mm, balya yüksekliği: 750 mm, balyanın ağırlığı: 750 kg, toplam ağırlık: 33.000 kg, Good day, We are pleased to offer you, without obligation, a pre-owned complete bale press line consisting of an HSM baler, type VK 8818 R-FU, including conveying equipment and wire tying stations. The following technical data has been taken from the manufacturer's operating manuals and brochures. We cannot guarantee the accuracy or completeness of this information. Technical Data Balepress: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales produced: 29,020 bales (as of September 2025) Main press force: 1,000 kN Specific pressing force: 120 N/cm² Cutting edge ejector press force: 121 kN Feed hopper dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm (length adjustable from 600 up to 2,000 mm) Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput: Bulk density 20 kg/m³: 12.86 t/hour Bulk density 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 to 750 kg/bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Control panel: Siemens TP 700 Press dimensions: 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyors: 35,000 x 8,480 x 7,745 mm (L x W x H) Press weight: approx. 33 t (main press approx. 12 t, press channel with bale gripper approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors with equal performance Manual activation/deactivation of the number of wire windings to save tying wire for non-expansive material Cutting edge ejector with 121 kN press force Wire break and end sensor monitoring with automatic press shutdown Bale slide Hodpeyz Af Ejfx Ambel Visual warning signal mounted on the control cabinet Condition of the press: The complete press system (baler and conveyor technology) is in good, immediately operational condition, regularly cleaned, lubricated, and serviced weekly by the operator as per manufacturer's instructions. Technical data for the chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year built: 2015 Belt speed: 0.36 m/second Feed belt length: 7,000 mm Incline belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Effective width: 1,638 mm Total conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Maintenance platform - Bale chute - Wire redirection stations - Wire reel trolleys (without wire reels) - Stadler KF 1800 chain belt conveyor - Cross-running sliding belt conveyor - Pit cover from feed conveyor to pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant is already dismantled, stored, and can be loaded at short notice upon receipt of payment. We would be pleased if this or any of our other presses would be of interest to you. Your service team Mertens & Frowein GmbH

Koşul: iyi (kullanılmış), Üretim yılı: 2011, çalışma saatleri: 40.000 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 88 t, dolum açıklığı genişliği: 990 mm, dolum ağzı uzunluğu: 1.800 mm, balya uzunluğu: 1.200 mm, balya genişliği: 1.100 mm, balya yüksekliği: 750 mm, toplam ağırlık: 23.000 kg, yağ tankı kapasitesi: 2.000 l, güç: 90 kW (122,37 bg), hacim debisi: 643 m³/saat, Good day, We hereby offer you, without obligation, a used baler including conveyor belt, wire tying stations, and bale slide from the manufacturer HSM GmbH + Co. KG, model VK 8818 FU. The following technical data has been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we do not assume any liability. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours, as of July 2025 Main press force: 880 kN Specific pressing force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Press dimensions assembled: 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used at a recycling facility to compact paper, cardboard, and film. The baler is in good condition and will be replaced by a new, larger machine in May/June 2026. Until then, the machine can be inspected in operation with material feed. We would be pleased if this baler is of interest to you. Your service team, Hedpfxoymmtco Ambsl Mertens & Frowein GmbH

Koşul: ikinci el, makine/araç numarası: 11403, Rotor kanatları: 2 x 7 yıldız Rotor genişliği: 1200 mm Rotor çapı: 350 mm Hsdpfx Amsyx Nlysbel Giriş: 850 x 1200 Güç: 30 kW

Koşul: iyi (kullanılmış), Üretim yılı: 2005, çalışma saatleri: 15.606 h, Fonksiyonellik: tamamen fonksiyonel, presleme kuvveti: 50 t, dolum açıklığı genişliği: 1.050 mm, dolum ağzı uzunluğu: 1.250 mm, balya uzunluğu: 1.200 mm, balya genişliği: 1.100 mm, balya yüksekliği: 700 mm, balyanın ağırlığı: 500 kg, güç: 30 kW (40,79 bg), hacim debisi: 160 m³/saat, Good day, Hedpsyplwfefx Ambjl We hereby offer you, without obligation, a used baler from the manufacturer Presto GmbH & Co. KG, type HPK 50 B. The following technical data have been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we cannot assume any liability. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Pressing force (main ram): 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions (with a bulk density of 60 kg/m³): approx. 6.7 t/h Machine weight (press): 12.5 t Note: The machine has been serviced in our workshop (the main control valve on the hydraulic block was replaced) and tested under operating conditions, both in manual and automatic mode. The machine documentation is available in German. Viewing of the baler is possible by appointment at our workshop. We would be pleased if this machine is of interest to you. Your Serviceteam Mertens & Frowein GmbH