Kenar Bander (Kenar bander)

SCM olimpic k 360

DIGITALLY CONTROLLED EDGE BANDER WITH EDGE TRIMMER (SPINDLES) & CORNER ROUNDING UNIT
Brand: SCM
Model: K 360 HP-T-ER1 Serial No.: AH/120944
Ref: 123304 Year: 2017

WORKING CAPACITIES:
- Panel height to be machined: 8 - 58 mm
Thickness 10 to 45 mm with corner rounding unit
- Panel length to be edged: 210 to 2500 mm
- Minimum panel width to be machined: 90 to 1100 mm
- Edge thickness (coil): 0.4 to 3 mm without corner rounding
max 3 mm with corner rounding unit
- Edge thickness (strip): max 6 mm without corner rounding
Dkjdpfjrx S Ipox Al Dsu
max 3 mm with corner rounding unit
- Edge width: panel thickness +2 mm on each side
- Feed (feed rate): 11 m/min
- Distance between panels: 600 mm
- Panel overhang relative to transfer chain: 30 mm

MACHINE CONFIGURATION:
- StarTouch control
- Barcode reader prepared
- Ø800 mm coil holder
- Frontal extension table
- Easy size: digitized positioning of infeed fence and working height
- Anti-adhesive spraying unit
- Edge trimmer (Rectifier RT-V) 12000 rpm
- Infrared pre-heating of panels at infeed
- Glue spreading unit (VC-VM) with interchangeable glue pot
for granules, capacity 1 kg. Heat-up time 12 minutes
Pneumatic pre-cutting guillotine
Digitally positioned pressure station with 3 rollers
including 1 motorized and timed roller
- Tilting end trimming unit 0-20° 12000 rpm
- Top/bottom flush trimming unit with digitized positioning and copying system. 1/4 round cutter 2 mm (or chamfer) 12000 rpm
- Corner rounding unit R2 mm 12000 rpm with digitized positioning
- Top/bottom radius scrapers R1 & R2 mm with digitized positioning
- Top/bottom straight scrapers
- Edge finishing misting device

OTHER FEATURES:
- Rectifier unit motors: 2x2 kW
- Trimming motors: 2x 0.19 kW
- Height adjustment motor: 0.30 kW
- Feed motor: 1.1 kW
- Flush trimming (milling) unit motors: 2x 0.65 kW
- CE Marked
- Lockable isolator, emergency stop buttons
- Main power supply: 380V. Three-phase 50 Hz
- Pneumatic supply: 8-10 bar (max), dry air
- Extraction: 1x Ø100 mm and 5x Ø80 mm
Spindles: 780 m³/h Flush trimming 360 m³/h Scrapers 2x360 m³/h

Maximum floor space required in operating position:
10.80 x 2.40 m
Dimensions for transport (LxWxH):
4.85 x 1.20 x 1.70 m
Weight: 1568 kg

Machine supplied with mounted tools, manual, spare parts list and diagrams.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.