Boru bükme makinesi, CNC bükme makinesi

transfluid Maschinenbau GmbH DB 622-CNC-R/L

Pipe bending machine, CNC, tube bending machine, CNC tube bender, pipe bender, tube bending system, tube processing, pipe technology, right/left bending, 3D tube bending, servo-electric, multi-axis bending machine, mandrel bending machine

Performance:
- Round tubes steel S235: 22 x 2.0 mm Ø
- Round tubes stainless steel 1.4571: 22 x 1.5 mm Ø
- Max. section modulus: 0.5 cm³ (S235)
- Bending angle: up to 180° + 10° overbend
- Bending axis speed: max. 300°/sec
- Feed axis speed: max. 1800 mm/sec
- Rotation axis speed: max. 600°/sec
- Bending axis repeatability: +/- 0.05°
- Length repeatability: +/- 0.05 mm
- Torsion repeatability: +/- 0.05°
- Tube loader length/useful length for mandrel bending: on request
- Radius range: max. 66 mm
- Bending height: 1150 mm
- Push force for length positioning: 2.5 kN
- Bending axis drive: servo-electric
- Torsion and length positioning: servo-electric
- Drive for auxiliary axes (e.g., clamping, mandrel in/out, etc.): servo-electric
- Bending head positioning: servo-electric
- Slide adjustment (radial): servo-electric
- Follower slide (axial): servo-electric
- Material clamping (collet): pneumatic

Machine equipment / Standard configuration:
- Bending head for right/left bending in one setup
- Bending head positionable horizontally and vertically, including rotation axis for switching head (right or left bending)
- Bending head positioning by means of a combined cross axis/rotation axis, enabling right/left bending in a single setup
- Bending direction freely programmable, alternating right/left
Dodpowvqgtsfx Af Dowc
- Each bending head in standard has a max. switch level of 50 mm and can accommodate at least two tool sets depending on tube size, e.g., to use different radii or form clamps
- Max. radius difference between layers: 1.5xD
- With hollow shaft to use tools for small radii
- Minimal clamping length at tube end due to wide-opening counterholder, allowing the torsion unit to move directly behind the bending tool
->A separate collet is needed for each tube Ø
- Chuck for using segment collets; depending on segment contour, already formed tube ends can be clamped
- Material clamping in the VWE pneumatic
- Foot switch for opening or closing the collet in the VWE, facilitating easy loading and unloading
- Follower counterholder for bends up to 180° (for radii up to max. 2xD, for larger bending radii the counterholder can be repositioned to ensure consistent support up to 180° bending angle)
- Support for the mandrel bar and tube over the entire length for correct positioning
- Mandrel can be programmed to retract automatically during the bending process
- Minimal quantity lubrication for automatic mandrel lubrication, adjustable lubricant volume, usable from tube inner Ø 13.5 mm
- Central lubrication to automatically lubricate all moving parts in the required cycle
- Air conditioning unit for electrical cabinet cooling
- Function activation via hand switch on the control panel
- All functions can be operated in manual mode by keyboard and mouse
- The machine is built according to the latest safety requirements. To comply with CE regulations, an additional safety enclosure is required (DB-SA...)

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.