Briket presi

UMP Technika BP500A

Durumu: kullanılmış, Üretim yılı: 2019, çalışma saatleri: 4.000 h, Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: BP 500 A, DESCRIPTION BRIQUETTING PRESS This press is designed for compressing secondary raw materials into briquettes (briquette shape - rectangular). Technical data of the press: Dimensions: - Length: 1800 mm (2100 mm for transport) - Width: 1800 mm (2000 mm for transport) - Height: 1900 mm (2200 mm for transport) - Net weight: 2945 kg Power supply: - 380 V, 50 Hz, 33 kW, 70-100 A Output capacity: - 450 kg/h (+/-50 kg depending on the type and fraction of raw material) Hfsdpfxsxmav Ne Ad Ren Noise level: - A-weighted sound pressure at operator’s position: 77.8 dB +/- 5 dB Compression pressure: - Minimum: 1000 kg/cm² - Maximum: 1700 kg/cm² Hydraulic pressure: - Maximum 300 bar Raw material moisture content: - Not more than 14% Briquette dimensions: - Width: 150 mm - Thickness: 60 mm - Length: 40-105 mm Permissible operating ambient temperature: - -20°C to +35°C (up to +50°C with additional cooling system) The press consists of: Electrical system: Controls the hydraulic system of the press. Equipped with four electric motors: the first (30 kW) drives the main hydraulic pumps, the second (1.1 kW) operates the cooling hydraulic pump, the third (0.55 kW) drives the fan for the oil cooling system, and the fourth (1.5 kW) drives the sawdust feed auger. Motor and hydraulic valve operation is managed via contactors and intermediate solid-state relays, controlled by a microprocessor with expansion modules. An LCD touch screen is provided for visualization and parameter adjustments. Hydraulic system: Using pumps, high and low-pressure hydraulic and solenoid valves, and hoses, the system manages the operation of the hydraulic cylinders. There are three hydraulic cylinders: the first – main, for sawdust compaction; the second – vertical, for initial sawdust densification; the third – forming, for pushing briquettes into shape. Additionally, there is an oil cooling system with a pump and air cooler. Oil filtration is performed by a main high-capacity filter, a cooling system filter, and a fine cleaning filter. Material feeding is performed via an integrated loading hopper. The raw material, once inside the hopper, is intermittently mixed to prevent bridging. The mixer is driven by a chain from the auger gearmotor. The auger cyclically feeds material into the vertical press cylinder column. The hopper is equipped with two level sensors (lower and upper). If the hopper is enlarged, the sensors can be relocated as needed. Control: Dual-mode control is provided – manual and automatic. All control equipment is installed in the electric cabinet. Automatic control is the normal working mode, not requiring operator intervention. Manual mode is used for press adjustment, fault detection, cylinder reset to initial positions, or in emergency situations. Operation is facilitated by a display located on the electric cabinet door, showing entered parameters, which can be changed as needed, as well as press status and error notifications.