Özel amaçlı kamyon

VOLVO FH500 6x2 Wechselsystem mit F545RA.2.27 L214

Durumu: yeni, kilometre: 500 km, güç: 375 kW (509,86 bg), yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı uzunluğu: 3.800 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2024, Donanım: ABS, elektronik denge programı (ESP), is filtrasyon filtresi, klima, navigasyon sistemi, vinç, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, Wheelbase 3,700 mm, VIN: Will be provided later. • For the detailed vehicle equipment, please refer to the attached documents. • Oil pump type: LEDUC • Fifth wheel with sliding function and self-lubricating (Jost JSK type), mounted on subframe • Front support cover with company logo (etched/smooth steel sheet) Superstructure: Crane swap system: The superstructure including crane can be dismantled, allowing the fifth wheel to be mounted on the chassis. Operation of the crane and superstructure including the fifth wheel is also possible. The vehicle is equipped with two fifth wheels, each longitudinally adjustable. • Mounting/bolting of crane and main outrigger to the subframe. Installation of all hydraulic and electrical connections. Installation location: front • Flatbed made of steel/welded construction, removable • Length approx. 3,800 mm, width approx. 2,480 mm • Flatbed superstructure painted in RAL (chassis color) • Removable aluminum side panels, Suer make, height 600 mm, anodized version with steps, removable 'Kinngripp' stakes • Standard flatbed floor with welded 4 mm steel checker plate painted in RAL (chassis color) • 6 retractable lashing rings per side, 2,500 daN each, mounted in a slotted profile with flexible positioning • 4 chain lashing points, 6,500 daN (2 front, 2 rear on the superstructure) • Robust front wall made from a welded frame, welded-on 4 mm steel plate and 5 accessory hooks, front wall height approx. 1,300 mm, steel painted version with 2 folding lashing eyes for tie-down straps, welded on • Cladding sheets and fenders made from aluminum checker plate (sandblasted, powder-coated, and painted) • Multifix stake pockets, two rows approx. 800 mm spacing from front wall and rear • Mountings (for outrigger pads, crane plates) made from galvanized steel • Additional stabilizer mounted under the chassis • Installation of underride protection at the rear and additional stabilizer, including hydraulic and electrical connections • Duomatic and red/yellow connections, at the front for semi-trailer as well as rear for trailer • New crane, FASSI F545 RA 2.27, continuous rotation, fully assembled, installed, and parametrized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For detailed crane equipment, please refer to the attached documents • Series 5450 • Initial TÜV and UVV inspection and parametrization of the crane according to the technical regulations and load charts of FASSI loader cranes Additional Equipment and Crane Accessories: • 5 crane support pads with holders, positioned as per assembly drawing • AWC (automatic rope length control) • Operator’s manual, maintenance book, and crane inspection log Lighting: • 2 integrated LED working lights in the front wall • 2 rotating beacons on the FH cab roof • 2 strobe lights in the engine hood • 2 LEDs under the superstructure at the rear, left and right, arrangement as agreed • 4 LED work lights, 2 left and 2 right under the superstructure in the stabilizer area • 4 yellow LED light strips, one mounted on each stabilizer For further information, please feel free to contact us upon request. Ljdpoy E A Stofx Ak Sehf

Durumu: yeni, kilometre: 500 km, güç: 375 kW (509,86 bg), yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı uzunluğu: 3.800 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2024, Donanım: ABS, elektronik denge programı (ESP), is filtrasyon filtresi, klima, navigasyon sistemi, vinç, Chassis – New Vehicle: – MODEL YEAR 2024 • Manufacturer/Model: Volvo FH500 6x2, Wheelbase 3700 mm, VIN: To be provided. • For detailed vehicle specifications, please refer to the attached documents. • Oil pump type: LEDUC • Fifth wheel coupling with sliding mechanism and self-lubricating system (Jost JSK type), mounted on the subframe • Front stabilizer cover with company logo (engraved / smooth steel plate) Bodywork: Crane Swap System: The superstructure, including the crane, is removable, and a fifth wheel coupling can be mounted on the chassis for this purpose. Operation with crane and superstructure including fifth wheel coupling is also possible. The vehicle is equipped with two fifth wheel couplings, each longitudinally adjustable. • Mounting/bolting of the crane and main support beam to the subframe. • Installation of all hydraulic and electrical connections. Mounting location: front • Flatbed design as a removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm Ledpjy E A Sgjfx Ak Sohf • Flatbed body painted in chassis RAL color • Removable aluminium side panels, Suer brand, height 600 mm, anodized version with integrated steps, removable drop-in stakes (Kinngripp type) • Standard flatbed floor with welded 4 mm steel checker plate, painted in chassis RAL color • 6 retractable lashing eyes, 2500 daN each side, mounted in slotted rails for flexible configuration • 4 lashing points for chains, 6500 daN (2 front, 2 rear on the superstructure) • Sturdy front wall consisting of welded frame, welded 4 mm steel plate and 5 accessory hooks, front wall height approx. 1300 mm, painted steel, with 2 welded, foldable lashing loops for straps • Trims, mudguards made of aluminium checker plate (sandblasted, powder-coated, and painted) • Multifix posts pockets, 2 rows spaced approx. 80 cm from front wall and rear • Holders (for outrigger pads, crane plates) made of galvanized steel • Additional stabilizer mounted below the chassis • Mounting of underride guard at the rear and on the additional stabilizer, including installation of hydraulic and electrical connections • Duomatic and red/yellow connections, at the front for semi-trailer and also at the rear for trailers • New crane, FASSI F545 RA 2.27, continuous rotation, fully mounted, installed and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For detailed crane specifications, please refer to the attached documents • Series 5450 • The initial TÜV-UVV inspection and parametrization of the crane are carried out in accordance with the technical regulations and load diagrams of FASSI loader cranes Additional Equipment and Crane Accessories: • 5 crane support plates with holders, arrangement as per manufacturing drawings • AWC (automatic rope length control) • Operating instructions, maintenance manual, and crane inspection log book Lighting: • 2 LED work lights integrated into the front wall • 2 rotating beacons on FH cab roof • 2 strobe lights in the bonnet • 2 LED lights under the body at the rear, left and right (arrangement as agreed) • 4 LED work lights, 2 left and 2 right under the body near the support legs • 4 yellow LED light strips, one mounted to each support leg Further information available upon request.

Durumu: yeni, kilometre: 500 km, güç: 375 kW (509,86 bg), yakıt türü: dizel, toplam ağırlık: 26.000 kg, dingil konfigürasyonu: 3 dingil, renk: beyaz, vites türü: otomatik, emisyon sınıfı: Euro 6, yükleme alanı uzunluğu: 3.800 mm, yükleme alanı genişliği: 2.470 mm, Üretim yılı: 2024, Donanım: ABS, elektronik denge programı (ESP), is filtrasyon filtresi, klima, navigasyon sistemi, vinç, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. • For detailed vehicle specifications, please refer to the attached documents. • Oil pump type: LEDUC • Fifth wheel with sliding device and self-lubricating (Type Jost JSK), mounted on the subframe • Front stabilizer cover with company logo (laser-engraved/Smooth steel sheet) Superstructure: Crane Exchange System: The superstructure including crane can be dismounted, allowing a fifth wheel to be installed on the chassis instead. Operation with crane and superstructure incl. fifth wheel is also possible. The vehicle is equipped with two fifth wheels, each longitudinally adjustable. • Mounting/bolting of the crane and main support carrier onto the subframe. Installation of all hydraulic and electrical connections. Mounting position: front • Flatbed design as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Flatbed painted. Color tone RAL (chassis color) • Removable aluminum drop sides, make Suer, height 600 mm, anodized finish with integrated steps, side stakes Kinngripp removable. • Standard flatbed floor with welded 4 mm steel chequer plate, painted to RAL (chassis color) • 6 retractable lashing eyes, 2500 daN each side, fitted in perforated rail for flexible arrangement • 4 x chain lashings, 6500 daN (2 front, 2 rear on the body) • Sturdy front wall consisting of welded frame, welded-on 4 mm steel sheet and 5 accessory hooks; front wall height approx. 1300 mm, steel painted, with 2 foldable rings for lashing straps, welded on • Skirting and fenders from aluminum chequer plate (sand-blasted, powder-coated and painted) • Multifix side stake pockets: two rows, spaced some 80 cm from front wall and rear • Holders (for outrigger pads, crane plates) made of galvanized steel • Additional stabilizers installed under the chassis • Mounting of rear underrun protection and supplementary stabilizers, including installation of hydraulic and electrical connections • Duomatic and red/yellow couplings at the front for semi-trailers as well as at the rear for trailers • New crane, type FASSI F545 RA 2.27, continuous slewing, fully mounted, installed, and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For detailed crane specifications, please refer to the attached documents • Series 5450 • Initial TÜV-UVV (German safety inspection) acceptance and parameterization of the crane will be carried out in accordance with the technical guidelines and load diagrams of FASSI Cranes Additional Equipment and Crane Accessories: • 5 x crane support pads with holders, arranged per production drawing • AWC (automatic rope length control) • Operating instructions, maintenance manual, and crane inspection logbook Lighting: • 2 x integrated LED work lights in the front wall • 2 x beacon lamps on the FH cab roof • 2 x flashing lights in the engine hood • 2 x LEDs under the superstructure at the rear, left and right, arrangement as agreed Lhsdpfx Aey E A Sajk Ssf • 4 x LED work lights, 2 left and 2 right under the superstructure at the area of the stabilizer legs • 4 x yellow LED light strips, one fitted to each stabilizer leg Further information available upon request.