Iberus Polska Marcin Rogacewicz
Iberus Polska Marcin Rogacewicz dan Pruszcz Gdanski
Woodworking Machines and Tools
Sn. (Bay) Marcin Rogacewicz
ul. Nad Radunia 74
83000 Pruszcz Gdanski
Polonya
Województwo pomorskie
Benzer satıcılardan güncel teklifler
Küçük ilan
Schwanberg
1.844 km
Geniş bant zımpara makinesi
OTTComet 2
OTTComet 2
Ara
Durumu: mükemmel (kullanılmış), Working width: 1360 mm
Workpiece thickness: 3 – 160 mm
Abrasive belt dimensions: 1,360 x 1,900 mm
Variable feed speed: 7 - 14 m/min
Feed motor power: 1.1 kW, 400 V, 50 Hz
Extraction connection diameter: 2 x 160 mm
Compressed air supply: 6 bar
Dimensions (L x W x H): 2160 x 2260 x 2025 mm
Weight: approx. 2200 kg
1st unit: Steel contact roller
Motor power: 15 kW, 400 V, 50 Hz
2nd unit: Fixed sanding pad for fine sanding of solid wood & pneumatically controlled, time-regulated sanding pad for veneer sanding
3rd unit: Cleaning brush
Abrasive belt oscillation with limit switch
Transport belt oscillation pneumatic
Motorised workpiece thickness adjustment with LED display
Units equipped with emergency brake system
Emergency stop button at machine infeed
Roller table extension at infeed
Complete documentation
Used machine notice:
• Subject to technical changes and prior sale.
• Prices are ex-site, loaded free on truck!
• The machine has been cleaned and function-tested.
Kjdsych Igepfx Abcell
• All machines are sold as seen without any warranty or guarantee. Buyers are welcome to inspect the machine on site.
• Special agreements are only valid in written form.
(We only respond to enquiries with your address and telephone number!)
Küçük ilan
Schwanberg
1.844 km
Geniş bant zımpara makinesi
BÜTFERINGOPTIMAT SGO 211/RK
BÜTFERINGOPTIMAT SGO 211/RK
Ara
Durumu: mükemmel (kullanılmış), Üretim yılı: 2008, Working width: 1100 mm
Workpiece thickness: 3 – 160 mm
Abrasive belt dimensions: 1,120 x 1,900 mm
Variable feed speed: 2.6 - 13 m/min
Feed motor power: 1.10 kW, 400 V, 50 Hz
Extraction connection diameter: 2 x 160 mm
Compressed air supply: 6 bar
Dimensions (L x W x H): 1705 x 1545 x 1905 mm
1st Unit: Steel contact roller, diameter 160 mm
Motor power: 15 kW, 400 V, 50 Hz
2nd Unit: Combination unit, rubber-coated contact roller (Sh 65), rigid sanding shoe
Motor power: 11 kW, 400 V, 50 Hz
Abrasive belt cleaning by compressed air
Kljdpfxoychqzs Abcjl
3rd Unit: Cleaning brush
Multifunctional display
Multifunction lever (conveyor belt, workpiece thickness adjustment)
Electronic belt oscillation
Pneumatic conveyor carpet oscillation
Motorized setting of workpiece thickness with LED display in 0.1 mm increments
Units with emergency brake device
Emergency stop button at infeed and outfeed
Motor protection switch
Infeed roller table extension with 2 loose rollers
Automatic star/delta starter
Complete documentation
Note on used machines:
• Technical data may be subject to error and prior sale.
• The stated prices are ex works, free loaded at location.
• The machine has been cleaned and functionally tested.
• All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the site.
• Special agreements are only valid in written form.
(We only respond to inquiries including your address and telephone number!)
Küçük ilan
İtalya
1.943 km
Yukarıdan dikey taşlama
KÜNDIGECO
KÜNDIGECO
Ara
Durumu: kullanılmış, makine/araç numarası: 006385, Maks. işlenebilir genişlik: 1000 mm
Min. işlenebilir kalınlık: 3 mm
Kedpfx Aoybawksbcjll
Çalışma masası: sabit yükseklik
Çalışma birimi sayısı: 2 hayır
Küçük ilan
Detmold
2.494 km
Geniş bant zımpara makinesi
HEESEMANNKSM 2
HEESEMANNKSM 2
Ara
Durumu: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, taşlama genişliği: 1.350 mm, toplam ağırlık: 5.500 kg, çalışma yüksekliği: 880 mm, Wide belt sander with cross and longitudinal units for sanding, including veneer before lacquering.
Kjdpfxeya I Rio Abcoll
The machine is fully functional, well maintained, and in very good technical condition.
The feed belt has been renewed.
Sanding width: 1300 mm
Working height: 880 mm constant
Workpiece thickness: max. 3–140 mm
Transport bed with individual conveyor belts
Drive: 3.0 kW three-phase motor, including blow-off device
Feed speed: adjustable from 4.5–22 m/min
Units: cross/longitudinal/brush
Brush roller unit: centrally height-adjustable
Diameter: 150 mm
Drive power: 1.5 kW
Bristle material: fiber
1. Cross sanding unit:
Wear-free braking system,
pneumatic belt tensioning,
belt tracking monitoring
pressure lamella belt system, intermittent blow-off device
Abrasive belt dimensions: 4900 x 150 mm
Belt speed: 12 + 24 m/s
Drive power: 13/17 kW
2. Longitudinal sanding unit:
Infinitely variable, electronic control of abrasive belt speed by frequency converter
Wear-free braking system,
pneumatic belt tensioning
intermittent blow-off device
Infrared belt control
Abrasive belt runs in counter direction
Abrasive belt dimensions: 2620 x 1350 mm
Belt speed: 0.3 – 12 m/s
Drive power: 11 kW
Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and display of error sources, workpiece passage, and feed speed
Electronically controlled pressure beam
Distance between control rollers: 40 mm
Pneumatic belt tensioning
The contact surfaces of the pressure beam automatically adjust to the shape of the passing workpieces
Weight approx. 5500 kg
Space requirement approx. 2550 x 2675 x 2400 mm
Küçük ilan
Detmold
2.494 km
Geniş bant zımpara makinesi
HEESEMANNFGA for veneer and intermediate sanding
HEESEMANNFGA for veneer and intermediate sanding
Ara
Durumu: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, taşlama genişliği: 1.350 mm, toplam ağırlık: 4.200 kg, Fine and smoothing sanding machine Heesemann, Type: FGA 6
For intermediate lacquer sanding, fine wood sanding, and sanding of films
The machine is fully functional, well maintained, and in excellent technical condition. The conveyor belt has been replaced.
Sanding width: 1300 mm
Working height: 880 mm constant
Max. workpiece thickness: 3–80 mm
Transport bed: With individual conveyor belts
Drive: 2.5 kW three-phase motor, incl. cleaning device
Feed speed: 4.5–22 m/min, adjustable
Units
Brush roller unit: Central height adjustment
Diameter: 150 mm
Drive power: 1.5 kW
Bristle configuration: Fibre
Longitudinal sanding unit
Infinitely variable, electronic control of the sanding belt speed via frequency inverter
Wear-free braking system
Pneumatic belt tensioning
Intermittent belt cleaning device
Infrared belt tracking
Sanding belt operates counter to feed direction
Sanding belt dimensions: 2620 x 1350 mm
Belt sanding speed: 0.3–12 m/s
Drive power: 11 kW
Graphical operating terminal for input of machine settings, including numerical thickness adjustment as well as fault, workpiece passage, and feed speed indicator
Electronically controlled pressure beam
Roller spacing: 40 mm
Pneumatic belt tensioning
The pressure beam's contact surfaces automatically adjust to the shape of the workpieces passing through
Workpiece vacuum clamping unit: Fan with 5.5 kW drive power
Operator side and terminal: left
Operating voltage: 400 V; 50 Hz
Required space: 2550 x 2220 x 2300 mm
Weight approx.: 4200 kg
Kedeya I Iujpfx Abcsll
(Subject to technical changes and errors, as well as prior sale)
Küçük ilan
Hampshire
3.128 km
Geniş bant zımpara makinesi
BoereSandrite 1100 KC
BoereSandrite 1100 KC
Ara
Durumu: mükemmel (kullanılmış), Üretim yılı: 2006, BOERE Sandrite 1100 KC Zımpara Makinesi. Üretim Yılı - 2006.
Makine mükemmel çalışır durumdadır.
£8.450 + KDV, Fabrika çıkışlı.
Kledpfxoya Ilas Abcol
2 x Ana motor.
Pnömatik bant gergisi.
Maksimum İş Parçası Yüksekliği: 150mm
Bant Ölçüsü: 1110 x 1900mm
İlerleme Hızı: 4,4 m/dk – 12 m/dk'ya kadar ayarlanabilir.
Birinci ünite: Sert kauçuk merdane, çok iyi durumda. (Kalibrasyon amaçlı).
İkinci ünite: Kombi, Yumuşak merdane ve pnömatik ped. (Masif ahşap yüzey işlemesi).
Makine bağlantılı ve her türlü demonstrasyon için hazırdır.
Küçük ilan
Trittau
2.490 km
Geniş bant zımpara makinesi
VietSV3-4.3 RVXR
VietSV3-4.3 RVXR
Ara
Durumu: iyi (kullanılmış), Üretim yılı: 2020, Fonksiyonellik: tamamen fonksiyonel, çalışma genişliği: 1.350 mm, Wide Belt Sander for Woodworking
Manufacturer: Viet Model: SV3-4.3 RVXR
Year: 2020
Technical Data
Manufacturer: Viet Italia S.r.l.
Model: SV3-4.3 RVXR
Year of Manufacture: 2020
Belt width: 1350 mm
Working height: 160 mm
Machine with head adjustment (fixed working height 900 mm)
Feed motor: 1.1 kW (1.5 HP)
Feed speed: 0.5–7 m/min
Calibration sanding unit, sanding roller diameter: 190 mm
Belt length: 2620 mm
Dimensions: approx. W 2.2 x D 3.5 x H 2.5 m (+ extraction)
Weight: 6.5 t (+ extraction)
Equipment
– Machine with movable head
– Sanding belt change on the left machine side
– Tool set
– Digital thickness gauge
– Heavy material at infeed
– Electropneumatic oscillation control
– Air filter with condensate separator and automatic drain
– Maintenance-free pneumatics
– Pneumatic lifting/lowering when switching aggregates on or off
– Machine with head adjustment (fixed working height 900 mm)
– Lifting system on 4 columns (spindles) with chain drive
– Table extension at the front and rear with 1 roller each
– Industry 4.0 (LAN) package with LAN network connection
– Hundredths-lifting system with inverter
– Electromechanical grit set
– Sanding belt speed adjustable via frequency inverter
– V-Spin unit with 15-disc sanding system / 80 mm diameter
The V-Spin unit comprises 15 disc brushes arranged in a row and moving counter-rotating. The combination of both movements allows the V-Spin unit to round sharp edges and remove slag or oxides.
– 16 support discs for V-Spin units diameter 80 Scotch-Brite + abrasive grain 80
– 16 support discs for V-Spin unit diameter 80 Tampico + abrasive grain 80
– X-Spin unit / sanding system with 15 discs / 123 mm diameter
Group consists of 5 rotary heads, each head equipped with 3 rotating brush pads, diameter 123 mm.
– Oscillating Scotch-Brite brush
– Linear cleaning systems
– Conveyor belt
Conveyor belt made of HYPALON rubber, heat- and oil-resistant, hardness 60 SH, smooth surface
– Belt cleaning blower for the conveyor belt incl. extraction
– IPC MONITOR 15" touch-screen control for operating the machine, up to max. 10 processing units.
– 2 Euro pallets of new sanding belts
– Technical documentation incl. operating manual
The control system manages the following processes:
– Start-up sequence of selected drive motors
– Storage of 1000 processing programs
Kodpoya Eyhjfx Abcsll
– Automatic positioning of the thickness controller
– Acoustic and visual signals at machine start-up
– Operating hours counter
– Automatic feed speed control depending on machining performance (displayed in sqm). This allows a longer service life of the sanding belt using statistics.
Extraction System
– Manufacturer: Ringler, Kärcher Group
– Model: RE 36/110 D11 IE3
– Power: 11.0 kW
– 2930 rpm
– Connection: 400 V / 19.54 A / 50 Hz
– Year: 12/2018
– Weight: 754 kg
All details without guarantee.
A demonstration is possible at any time in our exhibition hall.
Küçük ilan
Raasdorf bei Wien
1.817 km
Geniş bant zımpara makinesi
Ott
Ott
Ara
Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2001, Ott Deltatronic geniş bant zımpara makinesi
€9.500,00 KDV hariç.
Ott Deltatronic
Kedeyatgispfx Abcoll
Magelis kontrol ünitesi
Zımparalama kalınlığı: 3-160 mm
Zımparalama genişliği: 1350 mm
3 ünite
Ağlak zımparalama paketi
Vakum
Satinaj fırçası
Temizlik fırçası
Pnömatik sürgü
Üretim yılı: 2001
Durum: Çalışır durumda
Küçük ilan
Sierakowska Huta
2.150 km
130 Geniş Bant Zımpara Makinesi, 2 ünite
EUMUCOVENUS 2RK 1300
EUMUCOVENUS 2RK 1300
Ara
Durumu: mükemmel (kullanılmış), Catalogue number: 7871
TECHNICAL DATA
- Maximum workpiece width: 1300 mm
- Maximum workpiece height: 170 mm
2 sanding units:
1) Grooved rubber roller for calibration
2) Grooved rubber roller + segmented pad + steel roller
– From above:
2 rubber pressure rollers
First unit:
- Rubber pressure roller
Second unit:
- Rubber pressure roller
- Cleaning brush
- Rubber pressure roller
– From below:
- 3 rubber idle rollers
- Feed belt
- 3 rubber idle rollers
- Pneumatic belt oscillation controlled by photocells
- Electrically adjustable table height
- Pneumatic brake
- Infinitely variable feed speed via gear motor
- Vacuum pump
- Main motor: 15 kW
Klsdpfsx U Urqox Abcol
- Feed motor: 1.5 kW
- Pump motor: 4.6 kW
- Working pressure: 6-8 bar
- Extraction port diameters: 2x150mm, 2x80mm, 4x70mm, 120mm
- Overall dimensions (LxWxH): 1700x2250x2400 mm + pallet
- Transport dimensions (LxWxH): 1700x2250x2140 mm + pallet
- Weight: approx. 2000 kg
ADVANTAGES
– Italian manufacture
– 2 sanding units
– Segmented pad
– Vacuum pump
– Unpainted
– Used sander, in very good condition
Net price: 39,900 PLN
Net price: 9,500 EUR (based on the exchange rate of 4.2 EUR)
(Prices may vary depending on exchange rate fluctuations)
Açık artırma
Biter
d
h
min
s
Açık artırma bitmiş
Nordrhein-Westfalen
2.576 km
Geniş bant zımpara makinesi
BRUSH SandingSD 1300-8RS
BRUSH SandingSD 1300-8RS
Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2023, Fonksiyonellik: tamamen fonksiyonel, çalışma genişliği: 1.300 mm, iş parçası yüksekliği (maks.): 140 mm, kontrolör modeli: Xinje XD5, boş ağırlık: 4.500 kg, çalışma uzunluğu: 200 mm, TEKNİK DETAYLAR
1. İstasyon: 15x hızlı değişim bağlantılı disk tip aşındırıcı fırça
2. İstasyon: 15x hızlı değişim bağlantılı disk tip aşındırıcı fırça
3. İstasyon: Tanjantial yerleşimli 9x aşındırıcı fırça
4. İstasyon: Tam genişlikte, aşındırıcı fırçalı enine silindir
5. İstasyon: Tam genişlikte, aşındırıcı fırçalı enine silindir
6. İstasyon: Tam genişlikte hava jeti
Çalışma genişliği: 1.300 mm
Çalışma uzunluğu: 200 mm
İş parçası yüksekliği: 3 - 140 mm
MAKİNE DETAYLARI
Kontrol Ünitesi: Xinje XD5
Kledox Tt Uujpfx Abcel
Toplam güç ihtiyacı: 13,4 kW
Ölçüler & Ağırlık
Alan gereksinimi: yaklaşık 5,1 x 2 x 2,3 m
Makine ağırlığı: yaklaşık 4.500 kg
DONANIM
Modül ünitelerinin modüler kontrolü
Hız kontrolü için frekans invertörü
Otomatik ayarlanabilir çalışma yüksekliği aralığı
Son alanda osilasyonlu hava üfleme
Zımpara kağıdı ve fırçaların kolay bakımı ve değiştirilmesi
Yedek fırçalar
Aşındırıcı ekler
Balıksırtı desenli kauçuk konveyör bant, altında tam yüzeyli çelik plaka
Küçük ilan
Almanya
2.184 km
Geniş bant zımpara makineleri Heesemann EH 51.13
HeesemannEH 51.13
HeesemannEH 51.13
Ara
Durumu: kullanılmış, Üretim yılı: 1998, Used machine
Year of manufacture: 1998
1 wide belt sander with combination unit
with electronic segmented pressure beam
for sanding softwood and hardwood veneers
Calibration and fine sanding of solid wood
Calibration of workpiece carrier boards
Sanding of defective veneers and coatings
Intermediate sanding of PU, hydro, UV, nitrocellulose, and polyester finishes
Sanding of barrier foils
with graphical control terminal
NC-controlled thickness setting from 3–150 mm
Calibration roller activation via terminal
with patented CSD segmented pressure beam for compensation of workpiece tolerances up to 2 mm
Sanding width: 1,350 mm
Abrasive belt length: 2,150 mm
Abrasive belt speed, frequency-controlled, approx. 2–18 m/sec
Sanding unit drive: 15 kW
Feed speed: 5/10 m/min
Compressed air: 6 bar
Compressed air requirement: 15 NL/min
With belt blow-off system: 490 l/min
Extraction nozzle: 180 mm
Kjdox Rpghepfx Abcoll
Air requirement (sanding unit): 1,800 m³/h
Required air velocity: 20 m/sec
Total connected load: approx. 17 kW
Weight: approx. 2,500 kg
Dimensions (W x D x H): 2,090 x 1,670 x 2,020 mm
Availability: short notice
Location: Röllbach
Küçük ilan
Torcé
3.082 km
1350 mm geniş bantlı zımpara makinesi MFA 6
HEESEMANNPONCEUSE DE SURFACE MFA 6 1350 mm
HEESEMANNPONCEUSE DE SURFACE MFA 6 1350 mm
Ara
Durumu: iyi (kullanılmış), Üretim yılı: 2008, Fonksiyonellik: tamamen fonksiyonel, HESSEMANN 3-HEAD SANDER:
Abrasive belt dimensions: 2,620 x 1,400 mm
Kedpfx Aex Rdn Tjbcjll
1 Longitudinal sanding unit
(with contact roller for calibration work (steel))
Diameter: 250 mm
Belt speeds: approx. 18 m/s
22 kW
Wear-resistant brake unit, automatic length adjustment
Dust extraction system regulated in accordance with workpiece detection, reverse belt direction, automatic abrasive grain compensation via computer
Belt speeds: 1.0 – 18 m/s
Drive: 15 kW
1 Longitudinal sanding unit
Belt speeds: 1.0 – 18 m/s
Drive: 15 kW
Includes stepless sanding speed adjustment via electronic frequency inverter, with double purge hole configuration for dust extraction.
Wear-resistant brake unit, automatic length adjustment for varying abrasive belt edge lengths, dust extraction system controlled according to workpiece (can be disabled), reverse belt direction.
2 pressure beams with selective pressure adjustment system – CSD® system
Continuously adjustable pressure of individual pressure elements for single or multi-workpiece feed. Spacing: 32 mm. Compensation for workpiece tolerances up to 2 mm by maintenance-free pressure magnets. Working width as well as the start and end of sanding for the pressure beam are set electronically.
Pressure elements are activated by electro-lifting magnets, which continuously adjust the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology guarantees a consistently even contact pressure according to pad coverage on the workpiece. The risk of sanding through on edges is virtually eliminated due to this dynamic and continuous pressure force regulation.
Küçük ilan
Strenči
2.190 km
Geniş bant kalibrasyon zımpara makinesi
Ara
Durumu: kullanılmış, Geniş Bant Kalibrasyon Zımpara Makinesi
Üretici: Viet Spa Italia
Model: PL ICCC
Yıl: 1995
Güç: 54 kW
Hava Basıncı: 5–8 bar
Ağırlık: 6200 kg
Kljdsx N T Efspfx Abcjl
Küçük ilan
Schweiz
2.356 km
Ahşap planya makinesi
Costa
Costa
Ara
Durumu: mükemmel (kullanılmış), Üretim yılı: 1994, Fonksiyonellik: tamamen fonksiyonel, Costa Planing Machine
High-performance profile planer – machining center with 10 spindles, used exclusively for processing spruce timber.
Technical specifications:
- Working width up to 300 mm
- Multi-stroke spindle system for flexible profile and dimension processing
- Feed speed: 140 m/min to 200 m/min
- NC control for precise, repeatable setup and machining processes
- All spindles equipped with support bearings (hydraulic clamping) for exceptional smooth operation, dimensional accuracy, and surface quality
- Planing table in perfect condition, no visible signs of wear or damage
- Accurate working in terms of dimensions and angles across the entire working width
- The machine is in technically excellent condition and operates precisely and reliably.
Spindle configuration:
- Horizontal spindle
- Stroke spindle right, vertical
- Stroke spindle left, vertical
- Stroke spindle horizontal
Klodex N D Rrspfx Abcsl
- Stroke spindle right, vertical
- Stroke spindle left, vertical
- Top spindle, horizontal
- Bottom spindle, horizontal
- Bottom spindle, horizontal
- Jointing spindle bottom, horizontal
This spindle arrangement allows complete processing of the workpieces in one pass with high dimensional accuracy and surface quality.
Küçük ilan
Bitburg
2.566 km
Lake zımparalı geniş bant zımpara makinesi
HeesemannKSM8 CSD 1300 + EA2
HeesemannKSM8 CSD 1300 + EA2
Ara
Durumu: işlem için hazır (kullanılmış), Üretim yılı: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2
Year of manufacture: 1994
Condition: used - ready for operation
Description
Wide Belt Sander
Condition: functionality tested
- Working width: 1300 mm
- Cross sanding unit with belt blower device
- Longitudinal sanding unit with infinitely adjustable speed and belt blower device
Kodsx N A Aaepfx Abcjll
- Calibration roller, controllable via control panel
- Vacuum conveyor belt – feed speed steplessly adjustable
- Satin finishing roller
- Brush roller
- Machine settings and pressure control system CNC-controlled
- EA dedusting machine, high-pressure blowing system with rotating nozzles and ionization for statically charged dust
Location: ex site customer
- immediately available -
Machine must be dismantled by the customer
Küçük ilan
Łabuńki Pierwsze
1.604 km
VIET Challenge 323B
VietChallenge 323B
VietChallenge 323B
Ara
Durumu: mükemmel (kullanılmış), Üretim yılı: 2002, Fonksiyonellik: tamamen fonksiyonel, toplam yükseklik: 2.200 mm, toplam uzunluk: 2.750 mm, çalışma genişliği: 1.350 mm, taşlama genişliği: 1.350 mm, toplam ağırlık: 3.580 kg, taşlama yüksekliği: 160 mm, giriş akımı türü: trifaze, taşlama bandı uzunluğu: 1.620 mm, iş parçası genişliği (maks.): 1.350 mm, Wide belt sander VIET Challenge 323B
Specification:
• Condition – used, after a comprehensive inspection and calibration
• Manufacturer – VIET
• Model – Challenge 323B
• Working width – 1350 mm
• Sanding thickness range – 3-160 mm
• 3 sanding units:
- First: calibration roller, made of hard rubber
- Second: rubber roller with lower hardness, with pneumatic engage/disengage function
- Third: soft rubber roller, with pneumatic engage/disengage function
• All rollers have a diameter of 240 mm
• Option to work with engage/disengage on the 2nd and 3rd rollers, or in manual mode with fixed height setting
• Main motors: 2 x 11 kW
• Machine operated via touchscreen panel with memory for various programs and settings as required
• Display for error and fault notifications
• Infinitely variable conveyor feed speed – variator
• Electronic thickness gauge for the workpiece
• Paper blow-off mechanism – on the 2nd and 3rd sanding units
• Reliable limit switch oscillation
• Conveyor in very good condition
• Infeed/outfeed extension rollers
• Workpiece thickness measuring device
• Safety sensor preventing insertion of excessively thick workpieces
• Original paintwork
• Abrasive belt dimensions – 2620 x 1380 mm
• Extraction ports – 7 pcs
• Weight – 3,580 kg
Kledpfjx Nw Spox Abcel
• Year of manufacture – 2002
• Complete documentation from the manufacturer in Italian
• Overall dimensions: 270 x 225 x 220 cm (L x W x H)
Additional information:
• Perfect, factory technical and visual condition
• The photos provided show the actual condition of the item for sale
• Possibility to power up and test the machine on site
Küçük ilan
Almanya
2.327 km
Geniş bant zımpara makinesi Weber LCE-2-1350 (DK)
WeberLCE-2-1350 (DK)
WeberLCE-2-1350 (DK)
Ara
Durumu: kullanılmış, Üretim yılı: 2011, Used machine
Year of manufacture: 2011
Wide Belt Sander WEBER LCE-2-1350 (DK) Compact with two sanding belts for calibration, veneer and intermediate lacquer sanding. With a constant working height and the following equipment:
Sanding Units
Contact Roller Unit
· Grooved steel contact roller Ø 210 mm for precise calibration
· Mechanical adjustment of the contact roller for grit compensation
· Pneumatic lifting of the contact roller
Combination Unit with
· Grooved rubber contact roller Ø 130 mm, rubber hardness 60 Shore – mechanical adjustment of the contact roller for grit compensation
· Pneumatic lifting of the contact roller
· Electronically controlled sanding pad with ISA system 22/22
ISA (Intelligent Sanding Pressure Adjustment)
· Patented segmented pressure beam system with full tolerance compensation
· Pressure pad width 22 mm (movable in longitudinal and transverse direction)
· Universal lamella with spot-controlled activation for all sanding tasks (no need to change the sanding lamella between veneer and solid wood sanding)
· Tolerance compensation +/- 1 mm
ISA-Control
· High-resolution workpiece detection with a control roller for each pressure pad
· Unrestricted feed of complex part shapes – multiple feeding with minimal lateral spacing
· Sanding intensity individually adjustable on all edges
· Sanding pressure adjustable via pressure regulator
· Feed-controlled engagement and disengagement
Kljdpfx Aex Hll Esbcol
Drive
· Sanding belt speed from 2–18 m/s for high removal performance
· Wear-free DC braking
· Self-tensioning belt drive
Belt Control
· Automatic compensation of unequal sanding belt edge lengths
· Optical, non-contact, and self-cleaning sanding belt scanning on the exchange side
· Fine adjustment of oscillation on the belt exchange side
· Belt run-off switches left and right
Operating Terminal 'SIEMENS' MP 177 6"
· Graphical operator guidance via 6" color display
· Program memory with 18 programs
· All parameters adjustable via program
Thickness Overlimit
· Safety bar at machine infeed with the following functions:
· Automatic lifting of the contact roller and segmented pressure beam
· Feed stop
Feed
· Rubber-coated and spring-loaded pressure rollers before and after the sanding station
· Secure workpiece transport with multiple feeding by pressure lamellas with tolerance compensation
· High-quality transport belt made of natural rubber
· Infinitely variable feed speeds for calibration and fine sanding
· Table extensions of 400 mm at infeed and outfeed with rollers
Technical Data
· Working width: 1350 mm
· Sanding unit drive (frequency-controlled): 1 x 15.0 kW
Availability: approx. April 2026
Location: Heidelberg
Küçük ilan
Gronau (Westfalen)
2.617 km
Geniş bant zımpara
OttRSO-1300
OttRSO-1300
Ara
Durumu: mükemmel (kullanılmış), Üretim yılı: 1992, Fonksiyonellik: tamamen fonksiyonel, Geniş bant zımpara makinesi, zımpara makinesi 1300mm
Marka: Ott
Model: RSO-1300
Yıl: 1992
Çalışma genişliği: 1300mm
15 kW silindirle birliktedir
ve
11 kW ayakkabı ile
+ Fırça
Kledex E Amqopfx Abcjl
İlerleme hızı: 10m & 20m/dak.
Küçük ilan
Kaunas
1.965 km
Geniş bant zımpara
DMCUS 1350 M2
DMCUS 1350 M2
Ara
Durumu: kullanılmış, Üretim yılı: 2001, Fonksiyonellik: tamamen fonksiyonel, DMC US 1350 M2 Geniş Bant Zımpara, 2001 model satılıktır!
Kodpox Ezwhefx Abcjll
Küçük ilan
Almanya
2.547 km
Geniş bant zımpara makinesi Costa SA TS 1350
CostaSA TS 1350
CostaSA TS 1350
Ara
Durumu: kullanılmış, Üretim yılı: 2005, makine/araç numarası: A41213AC1, Teknik bilgiler:
- Üretici: Costa
- Tip: SA TS 1350
- Üretim yılı: 2005
- Çalışma genişliği: 1.350 mm
- Zımpara bant ölçüsü: 2.620 x 1.380 mm
- Zımpara yüksekliği: 3-160 mm
- İlerleme hızı: 5 - 25 m/dk
- 1. Ünite:
- Boyuna zımparalama ünitesi
- Bant ölçüleri: 2620 x 1380 mm
- Elektronik zımpara patiği, Costa sistemi
- Temas silindiri mesafesi: 32 mm
- Segman genişliği: 32 mm
Kedpfx Abox Ex Tmecjll
- Tahrik motor gücü: 11 kW
- Toz alma fırçası çapı: 180 mm
- Kullanıcı tarafı: sol
- Yükseklik ayarı: motorlu
- Vakumlu taşıma bandı
- Toplam bağlantı gücü: 20 kW / 43 A
- Genişlik: 1.924 mm
- Uzunluk: 2.059 mm
- Yükseklik: 2.185 - 2.375 mm
- Emme bağlantısı: D 2x100 mm + 2x160 mm
- Hava debisi: 4.830 m³/saat, 24 m/s'de
- Basınçlı hava: 6 bar, 880 NL/dk
- Volt, Hz: 400 / 50
- Maksimum gerilim dalgalanması: +/- %5
- Ağırlık: 3.100 kg
- Lokasyon: Blomberg stokta
Küçük ilan
Bern
2.419 km
Geniş bant zımpara
KündigBrilliant-2 1350-REd-L
KündigBrilliant-2 1350-REd-L
Ara
Durumu: kullanılmış, Üretim yılı: 2012, Fonksiyonellik: tamamen fonksiyonel, Grinding unit with contact roller
Diagonal unit with segmented sanding pads (35 mm segment width)
2 motors, 15 & 11 kW, 400V
Working height clearance: 200 mm
Kljdpfxsx Eh Svo Abcsl
Constant working height (machine upper section adjustment)
Abrasive belt dimension: 1350 x 2000 mm
ENORMATIC automatic thickness adjustment
PLC control with touch screen and operating hours counter
Machine in intermediate lacquer sanding configuration
Pneumatic raising/lowering of the contact roller
Vacuum unit complete with integrated fan
Infinitely variable feed speed via touch screen
Stepless sanding belt speed and belt air jet on 2nd unit
Drive roller for sanding pads rubber-coated
Machine dimensions approx. 1,800 x 1,800 x 2,100 mm (LxWxH)
Weight approx. 2,800 kg
Küçük ilan
Cantù
2.263 km
Geniş bant zımpara
DMC SCM GROUPUNISAND 2000
DMC SCM GROUPUNISAND 2000
Ara
Durumu: iyi (kullanılmış), Code: 0260
Brand: DMC SCM GROUP
Model: UNISAND 2000 - CE Standard
Automatic wide belt sander with 2 longitudinal units and 1 transverse unit at the infeed, suitable for furniture manufacturing, joinery, custom-made fittings, panels, wooden doors, window frames, semi-finished products, and various applications – compliant with CE standards.
Technical Data:
- Maximum working width: 1350 mm
- Minimum working width: 52 mm
- Minimum workpiece length: 400 mm
- Minimum/maximum working height: 4/170 mm
- Feed belt with variable speed drive
- Longitudinal abrasive belt dimensions: 1370 x 2620 mm
- Transverse abrasive belt dimensions: 150 x 6550 mm
- Lamellar belt dimensions: 140 x 6300 mm
Klsdpfex Dm Tvsx Abcel
- Automatic belt tracking
- Automatic table height adjustment
- Digital display for working thickness
- Control panel with dust-resistant membrane keyboard
- Electronic abrasive belt oscillation system
- Rubber-coated pressure rollers
- Automatic belt tracking
1st Unit: Transverse sanding pad with 6550 mm development, equipped with a lamellar belt to ensure stability and optimal abrasive belt tensioning.
Sectioned electronic pad "EPICS" with "HYDRA" electronic control, 46 individually controlled sectors, 30 mm pitch. LED display for monitoring active pad sectors. The unit comes with blowers for cleaning the abrasive belt. 2-speed motor: 12/15 kW. Suction hood diameter: 160 mm.
Combined longitudinal calibrating/sanding unit with steel roller and sectioned electronic pad "EPICS" (46 sectors, 30 mm pitch), and reading barrier (46 sectors). Abrasive belt size: 1370 x 2620 mm. Roller diameter: 220 mm. Motor power: 15/18.5 kW. Oscillating blowers with electronic control.
Sectioned electronic sanding pad "EPICS" (46 sectors, 30 mm pitch), reading barrier (46 sectors). Motor power: 15 kW. Oscillating blowers.
Scotch-Brite satin finishing roller
- Diameter: 150 mm
- Motor power: 3 kW
- Suction hood diameter: 160 mm
Vacuum table
Electronic control: HYDRA 35
Compressed air: 8 bar
Dimensions (assembled): 3200 x 2900 x 2400 mm (H)
Dimensions (for transport): 3200 x 2300 x 2400 mm (H)
Weight: 4400 kg
Küçük ilan
Izdebnik
1.722 km
Geniş bant zımpara makinesi
SCMSANDYA 5S
SCMSANDYA 5S
Ara
Durumu: yeni gibi (kullanılmış), working width 1350 mm
calibrating unit with a steel roller
combination unit with two rubber rollers and a segmented pad
oscillation controlled by photocells
machine functions activated from control panel
belt cleaning system
variable feed speed adjustment of sanding belt on the second unit
pneumatically actuated segmented pad with adjustment
year of manufacture: 2007
Kodpfox Daz Hex Abcjll
electric table adjustment
material thickness gauge
vacuum hold-down table
Küçük ilan
Spatenhof
1.841 km
Geniş bant zımpara
KündigPremium-2 1350 RP
KündigPremium-2 1350 RP
Ara
Durumu: kullanılmış, Kündig Premium-2 1350 RP
Swiss quality product
Constant table machine / automatic head positioning
Wide belt calibration and fine sanding machine
1st unit: grooved rubber contact roller, 80 Shore
Contact roller height infinitely adjustable according to grit scale
2nd unit: pneumatic sanding pad unit
Sanding belt drive motor power: 15 kW
Working width: 1350 mm
Max. workpiece pass-through height: 200 mm
Feed speed: 3–15 m/min, steplessly adjustable
Automatic workpiece thickness adjustment
ENORMATIC quick setting with feed activation (for long workpieces)
PLC control with touchscreen and "teach-in" memory for automating and managing all work programs
Infeed and outfeed tables with roller supports
Kledpex A T Epsfx Abcjl
Additional outfeed table, foldable
Machine is KÜNDIG factory serviced
First delivered 2018 from training center / upon retirement
Few operating hours
Available from stock Lieboch / Leasing available
Küçük ilan
Kanada
8.848 km
Yukarıdan dikey taşlama
LOEWERDISC MASTER 3DBB
LOEWERDISC MASTER 3DBB
Ara
Durumu: kullanılmış, makine/araç numarası: 008349, Maks. işlenebilir genişlik: 1300 mm
Min. işlenebilir kalınlık: 100 mm
Çalışma masası: ayarlanabilir
Vakum halısı: evet
Çalışma ünitesi sayısı: 3 adet
Ksdpfx Abox A Tfiocoll























































































































































































































































































































































































