Kenar bantlama makinesi

BIESSE STREAM A

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2008, Fonksiyonellik: denenmemiş, X ekseni hareket mesafesi: 4.175 mm, Y ekseni hareket mesafesi: 1.550 mm, iş parçası yüksekliği (maks.): 40 mm, milling sayısı: 30, azami seyir hızı: 80.000 mm/dak, TECHNICAL DETAILS X-axis travel: 4,175 mm Y-axis travel: 1,550 mm X-axis traverse speed: 80 m/min Y-axis traverse speed: 80 m/min Z-axis traverse speed: 30 m/min Max. workpiece height: 40 mm Number of suction traverse beams: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X direction: 10 Total number of spindles: 30 Nodpfx Abeyttcwjdewd Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool change Liquid-cooled Saw unit Tool magazine 1 Number of slots: 18 Tool magazine 2 Number of slots: 10 EQUIPMENT NC positioning suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 7350

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2008, Fonksiyonellik: denenmemiş, kontrolör modeli: POWERCONTROL, iş parçası uzunluğu (maks.): 4.300 mm, iş parçası genişliği (maks.): 2.200 mm, X ekseni ilerleme hızı: 80 m/dak, TEKNİK DETAYLAR Maks. panel genişliği: 2.200 mm Maks. panel uzunluğu: 4.300 mm Maks. ana testere bıçağı çıkıntısı: 125 mm Maks. ilerleme hızı: 80 m/dak Testere ünitesi Maks. takım çapı: 450 mm Motor gücü: 13,5 kW Nwsdpfx Aboyttqzsdsd Gravür ünitesi Maks. takım çapı: 180 mm Motor gücü: 2,2 kW MAKİNE DETAYLARI Kontrol ünitesi: POWERCONTROL İşleme masası Kaldırma tablası kat sayısı: 4 Pens sayısı: 10 Makine, gerçek ve hukuki durumu ile ('görüldüğü ve beğenildiği şekilde'), fotoğraf dokümantasyonları ve tanımlayıcı karakterdeki teknik/ticari belgeler temel alınarak satılıp teslim edilmektedir. Alıcı, ürünü teslim almadan önce inceleme hakkına sahip olup, kurulumu, sabitlenmesi ve makinenin nihai kullanım yerinde kullanımı ile ilgili tüm sorumluluğu üstlenir. Harici referans: 5552

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2007, Fonksiyonellik: denenmemiş, iş parçası yüksekliği (maks.): 60 mm, kenar kalınlığı (maks.): 20 mm, kontrolör modeli: POWER CONTROL PC22, dönüş hızı (maks.): 12.000 dev/dak, Auction extended by one week due to updated technical data! Nwjdpfx Aoyqx U Hebdod TECHNICAL DETAILS Workpiece Dimensions Panel height: min. 12 mm Panel height: max. 60 mm Edge thickness: min. 0.4 mm Edge thickness: max. 20 mm Milling and Gluing Unit Pre-milling unit: available Motor power: 3 kW Speed: 9,000 rpm Adhesive tank for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Edge Processing Unit 1 End trimming: available Number of motors: 2 Motor power: 0.80 kW Speed: 12,000 rpm Edge Processing Unit 2 Top and bottom rough flush trimming: available Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge Processing Unit 3 Corner rounding: available Number of motors: 2 Motor power: 0.4 kW Speed: 12,000 rpm Edge Processing Unit 4 Milling unit for rough processing: available Motor power: 4 kW Speed: 9,000 rpm Edge Processing Unit 5 Edge scraper blade Edge Processing Unit 6 Glue scraper blade Edge Processing Unit 7 Polishing unit: available Number of motors: 2 Motor power: 0.18 kW Edge Processing Unit 8 Belt sanding unit: available Motor power: 1.5 kW Control software: POWER CONTROL PC22 Total connected load: 42 kW

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2004, Fonksiyonellik: denenmemiş, iş parçası yüksekliği (maks.): 60 mm, iş parçası genişliği (maks.): 2.800 mm, kenar kalınlığı (maks.): 20 mm, kontrolör modeli: IMATRONIC MT, The machine has the following configuration: Unit 1: Router with CNC positioning Unit 2: Router with NC positioning, hot-melt glue tank, hot-melt glue pre-press Edge Jointing + Edge Processing Unit 1: Edge banding unit (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling unit (1 motor) with automatic timer sequence Unit 5: Milling unit (1 motor) with automatic timer sequence Unit 6: Belt sanding unit (1 motor) Unit 7: Belt sanding unit (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Nwsdpfx Absyttrxodjd Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed chains: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the place of destination. External reference: 6561

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2012, Fonksiyonellik: denenmemiş, kesme genişliği (maks.): 4.500 mm, X ekseni ilerleme hızı: 140 m/dak, bölüm uzunluğu (maks.): 2.200 mm, Donanım: CE işareti, dozaj cihazı, TECHNICAL DETAILS The machine is equipped with two saw carriages. The technical specifications apply to both: Nwjdoyxn Adopfx Abdod Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum tool diameter (saw unit): 380 mm Maximum tool diameter (scoring unit): 200 mm Saw blade protrusion: 95 mm Number of rip saw grippers: 5 Number of cross-cut saw grippers: 8+4 Maximum feed speed: 140 m/min Connected load, saw unit 1: 15 kW Connected load, saw unit 2: 15 kW Connected load, scoring unit 1: 2.2 kW Connected load, scoring unit 2: 2.2 kW MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: Biesse-OSI EQUIPMENT Second flexible push system Quick-change system for saw blades Label printer for barcodes CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the place of destination. External reference: 5711

Durumu: incelemesiz (kullanılmış), Fonksiyonellik: denenmemiş, güç: 55 kW (74,78 bg), Üretim yılı: 2010, dönüş hızı (maks.): 2.965 dev/dak, TEKNİK DETAYLAR Nsdoyttk Ijpfx Abdswd Motor devri: 2.965 dev/dak Maksimum çalışma basıncı: 8,5 bar Hava kurutucu Model: ABT 102 Basınçlı Hava Kurutucu Maksimum çalışma basıncı: 21 bar MAKİNE DETAYLARI Kontrol modeli: HMI PLC KAESER Motor gücü: 55 kW Çalışma gerilimi: 400/460 V Makine, fotoğraf dokümantasyonu ve teknik/ticari belgelere dayanarak mevcut gerçek ve hukuki durumu ile ('görüldüğü ve beğenildiği gibi') satılır ve teslim edilir. Alıcı, ürünü teslim almadan önce inceleme hakkına sahiptir ve makinenin kurulumu, emniyeti ve nihai kullanım yerinde kullanımı ile ilgili sorumluluğu üstlenir. Harici referans: 7548

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2014, Fonksiyonellik: denenmemiş, güç: 25 kW (33,99 bg), iş parçası yüksekliği (maks.): 60 mm, kenar kalınlığı (maks.): 12 mm, X ekseni ilerleme hızı: 18 m/dak, Donanım: CE işareti, TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Maximum feed speed: 18 m/min Sequence of work steps: Section 1 Work step: Positioning Motor power: 2.5 kW Automatic control Edge preheater Nwedpfjytr Rgsx Abded Glue pot Glue preheater Roll magazine Section 2 Work step: Trimming Number of motors: 2 Section 3 Work step: Edge milling Number of motors: 2 Motor power: 0.55 kW NC positioning Section 4 Work step: Rounding Number of motors: 2 NC positioning Section 5 Work step: Milling Number of motors: 1 Motor power: 3.5 kW Section 6 Work step: Edge scraping Section 7 Work step: Glue scraping Section 8 Work step: Brushing Number of motors: 2 MACHINE DETAILS Total power: 25 kW EQUIPMENT Panel support guide Spray unit Control with more than 20 control systems CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documentation of a descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6216

Durumu: incelemesiz (kullanılmış), Üretim yılı: 2005, Fonksiyonellik: denenmemiş, güç: 19 kW (25,83 bg), X ekseni hareket mesafesi: 4.175 mm, Y ekseni hareket mesafesi: 1.730 mm, milling sayısı: 20, Takım tareti 1'deki takım istasyonu sayısı: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverses: 8 Number of tool magazine slots: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Nsdpfx Aboyttf Sodswd Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid cooled MACHINE DETAILS Total installed power: 19 kW Control system model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, milling cutters, and aggregates are not included in the scope of delivery. Safety fences are included subject to availability (left side only). The machine is sold and delivered in its actual and legal condition ('as seen and approved'), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6906