2019 Biesse Rover B 1650

Biesse Rover B 1650

Numerical control with bSolid software. The multi-document software application in the Windows environment enables the design of the finished product, definition of its processes, creation of work plans, simulation of machining operations on the 3D model of the machine, and generation of the required machine programs.

bSolid - 3-axis machining
bSolid - 5-axis machining module for surface processing with 5-axis units and interpolation movements on all 5 available axes (X,Y,Z,C,B). The module includes the following commands:
· Assignment to surfaces, three-dimensional roughing and finishing operations
· Spreading or projecting a path on a curved surface
Lsdpew D E A Eefx Ak Sjaa
· Machining on a plane
· Follow 2D or 3D curves with any type of tool

bSolid - 3D engraving
bSolid - Import external formats

Working areas: X = 5055 mm; Y = 1650 mm (may vary depending on configuration)
Z = 200 mm with modules H=74 mm
Z = 245 mm with modules H=29 mm
Workpiece capacity in Y:
* 1650 mm, with thickness up to 60 mm on modules with a height of 74 mm
* 1600 mm, with thickness over 60 mm on modules with a height of 74 mm.

10 ATS levels – 40 trolleys.
The system includes:
• 2 aluminium bars (No. 1 left and No. 1 right), on which the lateral stops slide.
• 10 aluminium work tables. The tables slide on hardened and ground linear guides with recirculating ball bearings. Locking is performed on both linear guides, front and rear, by four pneumatic cylinders. Control is provided via a button at the front of the work area. The slides run on steel guides positioned above the extrusion. Pneumatic locking system, divided into 2 locking zones in X. Automatic positioning (EPS) for work tables.

"EPS" (Electronic Positioning System) device for automatic positioning of the work tables and trolleys by NC, complete with locking mechanisms to eliminate possible operator errors.

Rear row stop, with 140 mm travel
Intermediate row stop, positioned at 405 mm, with 140 mm travel.
Front row stop, positioned at 1460 mm, with 140 mm travel
4 side stops with 140 mm travel (2 right + 2 left) with system
2 additional side stops with 140 mm travel (1 right + 1 left).
Sensor for checking whether the stops are lowered

12 clamps for clamping narrow workpieces
6 loading assistance bar lifts, for H=74 mm module

"5A" configuration, for Rover B. Configuration for high productivity and flexibility thanks to the two operating units (4 and 5 axes) and the possibility to change tools simultaneously. Includes the axes and slides for movement of the main operating units. Contains 2 inverters.

Second Y-axis. Enables separation of the front and rear Y-slides with independent drives. Both Y carriages have a maximum speed of 118 m/min.

13.2 kW (17.7 HP) electrospindle, HSK F63 interface, air-cooled.

Key features:
• 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 mode.
• 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 mode.
• Ceramic bearings.
• Clockwise and counter-clockwise rotation.
• Speed programmable from 1,000 to 24,000 rpm via NC.
• The pneumatic release is effected via a prismatic linear guide and recirculating ball bearing. A cover is included for chip extraction with 6 different positions i...

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.