Takım kesici

DECKEL FP2

Koşul: mükemmel (kullanılmış), Üretim yılı: 1979, Fonksiyonellik: tamamen fonksiyonel, Universal Milling Machine Deckel FP2 with 3-Axis Active – TNC 111 Heidenhain Digital Readout with Accessories – Excellent Condition Technical Data: >> Year of manufacture: 1979 Machine no.: 2202-10512 >> Fixed angle table >> Spindle speed: 25 – 2500 rpm >> Infinitely variable feed in all 3 axes >> Rapid traverse in all 3 axes >> Drive power: 2.2 kW >> Spindle brake >> Travel (X/Y/Z): 400/220/400 mm >> Vertical milling head can be shifted 150 mm on spindle carrier >> Vertical and horizontal quills – extendable, SK40 taper Codpfx Aley H Ibcjcjgt >> Drawbar system M16 >> Weight approx. 1400 kg Accessories and Features: >> 3-Axis TNC 111 Active digital display Heidenhain >> Coolant system >> Central lubrication >> 1 accessory cabinet with the following: Collets, tool holders, clamping tools, steady rest, Dividing head with 3-jaw chuck, machine vice, steady rest, index plates, and much more About the Machine: Offered here is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from a laboratory within a government facility and has seen very little use. It comes with an accessory cabinet containing a wide assortment of tools. The machine has very minimal play in the cranks and all spindles move smoothly. The geometry is outstanding. Even at maximum speed, the milling machine runs quietly. On this newer FP2 model, feed is steplessly adjustable in all three axes and each axis features rapid traverse. A major advantage is the active 3-axis digital readout. With this Heidenhain path control, you can enter dimensions which the machine automatically positions to. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Koşul: yenilenmiş (kullanılmış), Üretim yılı: 1984, Universal takımlı freze makinesi DECKEL FP 3 3 eksenli Heidenhain TNC 11 aktif dijital gösterge ile Üretim yılı: 1984 Hareket mesafesi: X 500 Y 300 Z 400 mm Cedpfx Asxuh Rdjlcegt Devir aralığı: 25 – 2500 dev/dak Aşağıdaki aksesuarlarla birlikte: Sabit açı masası, bağlama yüzeyi 850 mm x 400 mm Döner masa, 450 mm çapında, bölme diskli Oymacı kafa (stosskopf) Kaydırılabilir dik freze kafası Uzayabilir matkap mili Kademesiz ilerleme potansiyometre ile Çeşitli freze milleri SK 40 / S22 x 2 Talaş tavası X, Y, Z eksenleri için otomatik merkezi yağlama pompası Makine aydınlatması Soğutma sistemi 4 adet makine ayağı Kullanım kılavuzu

Koşul: iyi (kullanılmış), Üretim yılı: 1962, Mil montajı, dikey + yatay SK / ISO 40 Açısal tabla sıkıştırma yüzeyi 700 x 285 mm Seyahat X ekseni 500 mm Y ekseni 200 + yaklaşık 250 mm Z ekseni 400 mm Mil kovanı stroku yaklaşık 80 mm Csdjm Uygvopfx Alcegt 18 ana iş mili hızı 40 - 2000 rpm 18 besleme hızı 8 - 400 mm/dak Hızlı travers 1200 mm/dak Tahrik gücü 2,2 kW Boyutlar U x G x Y 1150 x 1050 x 1650 mm Makine ağırlığı 1000 kg Aksesuarlar / özel özellikler: - Dikey freze kafası, dönebilen R/L - Sabit açılı sıkma tablası - Tüm eksenlerde ilerleme + hızlı travers Siegfried Volz Takım Tezgahları Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Üretim yılı: 1987, Koşul: işlem için hazır (kullanılmış), Üç adet eski Hermle ve Deckel freze makinesi mevcuttur. 1) Hermle FW 801 yatay freze makinesi, takım tutucu: SK40, hareket mesafesi X/Y/Z: 430mm/150mm/420mm, devir hızı: 2000 devir/dak, makine boyutları X/Y/Z: yaklaşık 2250mm/1700mm/1500mm, ağırlık: yaklaşık 1000kg. 2) Hermle FW 710 üniversal freze makinesi, takım tutucu: SK30, tabla boyutları X/Y: 710mm/190mm, hareket mesafesi X/Y/Z: 400mm/150mm/350mm, devir hızı: 2240 devir/dak, makine boyutları X/Y/Z: yaklaşık 1500mm/1000mm/1800mm, ağırlık: yaklaşık 700kg. 3) Deckel FP 2, üretim yılı: 1987, takım tutucu: SK40, hareket mesafesi X/Y/Z: 300mm/220mm/400mm, tabla boyutları X/Y: 620mm/390mm, maks. tabla yükü: 250kg, devir hızı: 3150 devir/dak, ilerleme: 3600mm/dak, hızlı hareket: 4000mm/dak, makine boyutları X/Y/Z: yaklaşık 2500mm/2100mm/1800mm, ağırlık: yaklaşık 1250kg, kontrol ünitesi: Heidenhain TNC 355. Yerinde inceleme mümkündür. Tek tek satış mümkündür, ancak toplu satış tercih edilmektedir. Csdpfoy I Adhex Alcogt

Koşul: mükemmel (kullanılmış), Deckel FP1 AKTIV (3-Axis Aktiv) Machine No.: 2102-3240 Year of manufacture: approx. 1988 Travel paths: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment/Accessories: - 3-axis active digital readout HEIDENHAIN type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Quill travel on vertical milling head: 60 mm Cgsdpfjyll A Tox Alcot - Vertical milling head can be swiveled and extended horizontally by 100 mm - Coolant system (coolant tank integrated in the machine base) - Documentation - Central lubrication system - Machine vice - Various tool holders/collets/tools Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Geometry inspection videos can be provided upon request. Backlash Y-axis: 0.1 mm Backlash X-axis: 0.2 mm Backlash Z-axis: 0.15 mm Runout horizontal spindle: 0.001 mm Runout vertical spindle: 0.001 mm Deviation in parallelism Y-axis: 0.002 mm (measuring length 150 mm) Deviation in parallelism X-axis: 0.01 mm (measuring length 300 mm) Geometry measurement videos can be provided upon request. The following parts have been renewed: - Gears in the horizontal head replaced and gear shaft newly mounted - New guide cover Z-axis + various attachments - Machine refurbished - New LEDs installed - Y-axis chain tensioner overhauled - Reference point programming checked - Function test performed

Koşul: işlem için hazır (kullanılmış), DECKEL FP 2 universal milling machine from educational institution -Well-maintained, original condition -Travels X/ Y/ Z: 400x200x400mm -3-axis digital readout 'NEW' -Angle table - clamping surface 700x350mm -Spindle speed range 40 - 2000 rpm -Automatic feeds / rapid traverse on all three axes -Tool holder ISO 40 -Vertical / horizontal milling attachment -Swiveling vertical head with quill -Coolant system -Spindle nut X-AXIS 'NEW' -Machine feet -Various tool holders -Chip tray - machine base -Documentation Cgodpfx Aex Hyuhelcjt Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight: 1500 kg Errors and omissions excepted.

Koşul: işlem için hazır (kullanılmış), Deckel FP 2 NC Universal Milling Machine TNC 320 / 321 Travel: x- 300mm | y- 300mm | z- 400mm Infinitely variable speed: 31.5 - 5000 rpm Feeds: 2-4000/min Rapid traverse: 4000/min Tool holder: SK 40 Quill stroke: 80 mm Machine weight: 1350 kg You are welcome to arrange a viewing appointment. We can organize cost-effective shipping for you! Cgsdpfxoxfkm As Alcst You will receive a proper invoice. For international customers, a net invoice can also be issued. The prerequisite is a valid VAT ID number. Subject to prior sale. Visit our shop and browse our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations in technical data or errors in the item description may occur and are subject to change.

Koşul: yenilenmiş (kullanılmış), Please read the technical specifications in full. If this machine is a serious investment option for you, we kindly request your complete credentials, including correct telephone number and email address, in order to provide you with an offer. Deckel FP1 AKTIV (3-axis Active) Machine no. 2102-5745 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment: - Active 3-axis digital readout HEIDENHAIN type TNC 113 - Infinitely variable feed in X, Y, and Z axes - Quill travel on vertical milling head: 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Coolant system (coolant tank in machine base) - Documentation - Central lubrication Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Geometry inspection videos can be provided on request. Backlash Y axis: 0.15 mm Cgsdpfsxpwfgox Alcst Backlash X axis: 0.3 mm Backlash Z axis: 0.2 mm Run-out horizontal spindle: 0.002 mm Run-out vertical spindle: 0.002 mm Parallelism deviation Y axis: 0.002 mm (measuring length 150 mm) Parallelism deviation X axis: 0.002 mm (measuring length 300 mm) The following parts have been renewed: - Central lubrication checked - Heidenhain digital display overhauled - Wiper set installed - LEDs on active display replaced - Oil change - Vertical milling head newly re-bedded - Oil sight glass replaced Price net, ex works, loaded from stock.

Koşul: işlem için hazır (kullanılmış), Universal milling machine / DECKEL FP 2 with 3-axis Heidenhain digital display ND 780 - Travel paths X/Y/Z 450x230x400 mm - Automatic feeds / rapid traverse in all 3 axes - Heidenhain 3-axis digital display ND 780 - Speed range 40-2000 rpm - Universal tilting/swiveling/rotary table - Horizontal / vertical milling device with vertical sliding head Cgedpfey Ipgijx Alcot - Tool holder ISO 40 - Coolant system - Chip tray - Various tool holders & collets - Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1600 Kg Errors and omissions excepted.

Koşul: mükemmel (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, -KOM 3149- Offered here is a slotting head for a Deckel FP2 milling machine. The slotting head can be rotated 360 degrees on the flange plate. All guide surfaces are in very good condition. The dimensions of the slotting head can be found in the last picture. Csdpfx Aljwxxd Secsgt Size: approx. 600 mm x 450 mm x 500 mm Weight: approx. 35 kg

Koşul: ikinci el, Motor power: 3 kW Total power requirement: 3 kW Weight: 1,400 kg OFFER We can offer you—subject to prior sale and errors—without obligation and ex stock: DECKEL Universal Tool Milling Machine with FAGOR 3-axis digital readout Type: FP 3 Year of manufacture: Serial No. Table travels: longitudinal (motor/manual) 490 / 500 mm vertical (motor/manual) 370 / 380 mm cross-slide travel (motor/manual) 290 / 300 mm Fixed angle table 2230 420 x 800 mm Installation height under spindle: 90 – 470 mm Spindle taper: SK 40 18 spindle speeds: 40 – 2,000 rpm 18 feeds: 10 – 500 mm/min Rapid traverse: 1,500 mm/min Spindle drive: 3 kW Total drive: 3 kW - 380 V - 50 Hz Weight: 1,400 kg Accessories / Special features • FAGOR 3-axis digital display V 300 (glass scales) with advanced functions such as chain dimension, absolute measurement, mm/inch switching, etc. • Movable DECKEL universal vertical milling head, swivels +/- 90° • Original DECKEL tooling cabinet with a wide range of tooling, such as various tool holders, collet chuck with approx. 20 collets, long arbor, various spacing rings, drivers, clamping elements, operating tools, etc. • DECKEL large fixed angle table, 420 x 800 mm, mounted • DECKEL universal dividing head with direct and indirect division, various dividing plates Cgsdpfx Ajv Nq Skslcet • Removable, manual DECKEL universal rotary table Ø 380 mm with direct and indirect indexing, various dividing plates • Coolant system, chip tray, central lubrication, separate control cabinet, operating instructions Condition: Very well-maintained! Ideal machine for the (training) workshop or small batch production! Click here for a video of the machine: FP3/4 Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – payable upon receipt of invoice We always have a large selection of conventional and CNC milling machines in stock. Please contact us!

Koşul: iyi (kullanılmış), Üretim yılı: 1982, Fonksiyonellik: tamamen fonksiyonel, 3D kontrollü, manuel el çarklı ve üç eksende ayarlanabilir üniversal tablalı takım freze makinesi. Direksiyon: Kapak İletişim Kutusu Kontrolü 4: Delme ve frezeleme döngüleri de dahil olmak üzere 3B yol kontrolü, Monitör, elektrikli El kontrol paneli Programların giriş ve çıkışı için terminal Teknik veriler: Seyahat aralığı X/Y/Z 300 x 220 x 400 mm Devir 31,5 - 3.150 dev/dak. 21 vites kademesi ile Besleme 4-2000 mm/dak. Hızlı geçiş 4 m/dak. Tahrik gücü 1.6-2.0 kW Takım tutucu SK 40 Hidrolik alet sıkıştırma Dijital göstergeli üniversal freze masası: Kelepçeleme alanı 600 mm x 320 mm Masa yükü 180 kg C ekseni dönüş aralığı 360° Eğim aralığı A ekseni 15°/45° B ekseni dönüş aralığı +/- 45° Dikey freze kafası: El ile tüy darbesi - yatay 65 mm, dikey 60 mm Ek özellikler: ölçekli manuel makine el çarkları Cgsdpfewid Spox Alcst NC eksenlerinin doğrudan yol ölçümü Soğutma suyu sistemi Özel aksesuarlar: Takım tutucular yaklaşık. 33 parça (aletsiz) - fotoğrafa bakın Yüksek hızlı freze mili Makine verileri: Makine ağırlığı yaklaşık. 1.380 kilo Ek bileşenler dahil alan gereksinimi L yaklaşık. 2.940 mm, yaklaşık G. 1.900 mm, Y yaklaşık. 1.960 mm Güç kaynağı 380 V, 50 Hz, 12 kVA Makine iyi durumdadır ve tüm fonksiyonları çalışır durumdadır. Randevu ile elektrik ve çip altında görülebilir.

Koşul: yenilenmiş (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, X ekseni hareket mesafesi: 400 mm, Y ekseni hareket mesafesi: 220 mm, Z ekseni hareket mesafesi: 400 mm, maksimum mil hızı: 2.500 dev/dak, mil hızı (dk.): 25 dev/dak, son revizyon yılı: 2026, Dear Sir or Madam, For sale is a Deckel FP2 Aktiv. This newer model is particularly notable for its stepless spindle speed control with Heidenhain Aktiv controller, making operation both easy and extremely comfortable. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Cgsdsx Hr Dzepfx Alcjt Machine no.: 2202-xxxx Table: rigid angled table or rotary-tilt-swivel table Travel (X/Y/Z): 400mm / 220mm / 400mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25–2500 rpm Tool holder: SK40 Drawbar system: S20x2 Feed: infinitely variable Equipment and accessories: 3-axis Heidenhain digital readout, infinitely variable feed on all 3 axes, Heidenhain digital display with Aktiv controller, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - On request, we can carry out a complete or partial overhaul of the selected machine - On request, you can order additional accessories such as tools directly - On request, we can also install further equipment such as safety devices directly - We are happy to take care of shipping and/or installation

Koşul: mükemmel (kullanılmış), x-Ekseni 450 mm Cgedpfx Asvwgn Djlcot y-Ekseni 175 mm z-Ekseni 400 mm Mil devir hızı 60 - 2800 dev/dak Takım bağlantısı ISO SK-30 Makine ağırlığı yaklaşık 1 t Alan ihtiyacı yaklaşık 1,1 x 1 x 1,5 m Freze makinesi çok iyi bakımlı durumda.

Koşul: yenilenmiş (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, X ekseni hareket mesafesi: 400 mm, Y ekseni hareket mesafesi: 220 mm, Z ekseni hareket mesafesi: 400 mm, maksimum mil hızı: 2.500 dev/dak, mil hızı (dk.): 25 dev/dak, son revizyon yılı: 2026, Donanım: dokümantasyon / kılavuz, Dear Sir or Madam, For sale is a partially overhauled Deckel FP2. This newer model stands out above all for its infinitely variable speed control, which makes operation both very simple and extremely comfortable. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition. You are welcome to inspect it in person on site. --- Currently 3 units available for immediate delivery! --- Availability: 3x immediately Machine no. 2202-xxxx Table: rigid angled table or rotary-tilt-swivel table Travel (X/Y/Z): 400 mm / 220 mm / 400 mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25–2,500 rpm Tool holder: SK40 Drawbar system: S20x2 Feed: Infinitely variable Equipment and accessories: 3-axis Heidenhain digital readout, infinitely variable feed on all 3 axes, coolant system, central lubrication, technical documentation, machine feet, safety devices (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your selected machine - If desired, you can order additional accessories such as tools directly - If requested, we can install additional equipment such as safety devices directly - We are happy to arrange shipping and/or on-site installation for you Codpfx Aljy Exayecegt