Lazer kesme makinesi

DNE - member of Bystronic group D-Soar Plus 2040 - 12000 Watt

Laser Power: 12,000 watts
Working Area (Laser Operation): 4000 x 2000 x 270 mm
Positioning Speed X/Y/Z: 200 m/min
Simultaneous: 280 m/min
Max. Workpiece Weight: 3,000 kg
Max. Mild Steel: 30 mm
Max. Stainless Steel: 30 mm
Max. Aluminum: 25 mm
Max. Copper: 10 mm
Max. Brass: 20 mm
Length: 12,500 mm
Width: 3,650 mm
Height: 2,620 mm
Machine Weight: 18,000 kg

Standard Equipment
Main Components
1. Fiber Laser Source: D-Soar (CE&UL), Raycus
2. Cutting Head: Bystronic DNE Copyright
3. Cutting Software: BUS Control Hypcut FSCUT 8000C
4. Rack and Pinion (X & Y Axis): M3 from Herion
Nwodsv Uz Tiepfx Aacop
5. Shuttle Table: Parallel shuttle table (two levels)
6. Ball Screw: TBI (Taiwan)
7. Linear Guide: Won (South Korea)
8. Reduction Gearbox: Neugart (Germany)
9. Servo Drive and Motor: Inovance or Schneider
10. Machine Bed: Welded machine body
11. PC: I7 CPU, 8GB, 120GB, 10kW
12. Monitor: Capacitive touchscreen (21.5" XC-2209CMDR)
13. Proportional Valve: Felton low pressure, 10kW
14. PLC Hardware: Schneider
15. Solenoid Valve: High Pressure: CEME, Low Pressure: Airtac
16. Gantry: Aerospace aluminum cutting bridge, die-cast steel formed
17. Chiller: S&A customized
18. Electrical Control Cabinet: Independent control cabinet (Bystronic DNE Copyright)

Electrical Connection (Machine incl. Laser Source and Chiller)
The voltage supplied by the utility provider must meet the requirements of EN 50160 and IEC 60364-1. Stable voltage is essential for consistent performance. Power supply must not exhibit voltage fluctuations across the entire network tolerance, such as those generated by spot welding equipment. If such a stable supply cannot be guaranteed at the installation site, the system must be equipped with a transformer and/or voltage stabilizer.

Machine power supply, including Laser Module:
- 3 phases and PE
- Supply system: TN
- Main frequency: 50/60 Hz
- Supply voltage: 3 x 380 V
- Max. allowable voltage fluctuation 50 Hz: +/- 10%
- Max. allowable voltage fluctuation 60 Hz: +6/-13%
- Fuse: 150 AT

Machine: 9 kW
Hydraulic shuttle table: 15 kW
Extraction unit: 7.5 kW
Resonator: 36 kW
Chiller: 15 kW
Total connected load*: 80.5 kW
cos(phi): 0.83
Average power demand: 30.75 kW
*Values measured at full laser power and ambient temperature of 20°C. Values are based on a typical material mix.

Compressed Air (Machine, Laser Source, Cooling Unit, Extraction Unit)
Compressed air quality must meet ISO 8573-1:2001. To avoid compressor contamination, an oil-free screw compressor with downstream air treatment (dryer) is required.
- Min. static pressure at supply unit: 20 bar
- Max. consumption: 1.05 m³/min
- Max. compressed air inlet temperature at maintenance unit: 43°C

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.