Working platform semitrailer

ES-GE 3-Achs Megatrailer, hydr. Heckabsenkung, 1xgel.

You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.

Excerpt from the equipment list. Complete equipment list available upon request.

Chassis:
* Welded construction made of high-quality steel profiles with continuous crossmembers for high ground and point load capacity, with a heavy-duty outer frame.
* Loading platform at the rear as a steel welded structure with two welded-in tracks made of 5-hole steel sheet (hole pattern System Lohr/Rolfo) with a length of approximately 2,250 mm, hydraulically lowerable by approximately 350 mm.
* Integrated loading platform at the rear of the vehicle, approximately 1,500 mm, hydraulically extendable as a steel welded structure with 5-hole steel sheet (hole pattern System Lohr/Rolfo) cover, light fitting, and 2 ramp compartments and ramp supports.
* The drive and control of the rear section are provided by an electric hydraulic unit mounted in a stainless steel box on the left of the chassis, with a radio remote control.
* Power supply via the vehicle battery of the towing vehicle.
* NATO socket on the front wall, without connecting cable to the tractor unit.

Fifth wheel coupling:
* 2-inch kingpin, replaceable from below.

Under-ride protection:
* According to EC, permanently mounted.

Support legs:
* 2 x 12 t support winches with a 2-speed gearbox.

Axles:
* 3 x 10 t air-suspended axle unit, manufacturer SAF with disc brake approximately 370 x 45 mm, ABS, wheel connection 10-hole center-mounted ET120, total stroke of the air suspension approximately 200 mm, of which lifting approximately 140 mm and lowering approximately 60 mm, control of the air suspension via hand control with stop function.

Steering axle:
* 3rd axle as a trailing steering axle with manual and automatic reverse steering lock.

Lift axle:
* 1st axle automatically liftable, also switchable via operation on the chassis frame or via PIN 12 of the light socket.

Tires:
* 6 tires, 445/45R19.5, manufacturer of our choice, mounted on rim 14.00X19.5, 10-hole ET120.

Fenders:
* According to EC, 1/4 PVC fender in front of and behind the wheels of the 1st axle in front and behind, 2nd and 3rd axles in the rear.

Tire chock holder:
* None

Braking system:
* Two-line braking system according to EC with EBS, automatic load-dependent control.
* Spring brake accumulator as parking brake acting on 2 axles, interlock-protected coupling heads permanently mounted on the front crossmember, without connecting line to the tractor unit. Manufacturer Wabco.

Lighting system:
* According to EC, 24 volts, multi-chamber rear lights, license plate lights, LED side marker lights, LED position light white in front and LED side marker lights at the rear, 15-pole socket and 2x7-pole sockets permanently mounted on the front crossmember, without connecting lines to the tractor unit.

Load securing:
* 9 pairs of folding lashing rings evenly distributed, tensile force approximately 8 tons.
* 7 pairs of folding lashing rings evenly distributed, tensile force approximately 2.5 tons.
* 2 pairs of folding lashing rings at the rear of the vehicle, tensile force approximately 2.5 tons.
Cedpfxsy Up S Se Ambori
* In the outer frame, holes for lashing straps at approximately 500 mm intervals.

Lashing stakes:
* 16 lashing stakes approximately 100/40 mm, approximately 800 mm usable length.

Lashing stake pockets:
* 8 each on each side embedded in the outer frame.
* 4 rows of stake pockets transverse to the loading area.

Fl

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.